*Hi Stephan*
Thanks for the reply. And sorry about the mix-up!!
I have now downloaded 'flashrom-0.9.3.tar.bz2' and the GPG Sig File (as
a text file). They are in my 'Downloads' Folder.
Am I correct to say that I should now create a Folder called' /flashrom'
move the two files into it, unpack the 'bz2' file and then run -
$*svn co svn://coreboot.org/flashrom/trunk flashrom*
$*cd flashrom*
$*make*
$*sudo make install*
I would then run the 'flashrom -V' again and sent the output to you?
Thanks.
On 21/06/2011 16:16, Stefan Tauner wrote:
On Tue, 21 Jun 2011 15:13:00 +0200
Ian Whitfield<[email protected]> wrote:
*Thanks a lot Stephan*
I appreciate your help!!
I ran the Apt instruction from the Downloads site and it came back and
told me I had the latest version loaded.
hello again.
yes, many debian-based distributions do not ship a current version of
flashrom, hence you have to compile it yourself from source. else you
risk ruining your board. you don't want to follow the "Installation of
binary packages" section but "Installation from source".
if you don't understand what the section "Installation from source" at
http://flashrom.org/Downloads means, you can try downloading the debian
package from http://packages.debian.org/wheezy/flashrom, but that might
not work on linux mint and is not recommended.
if you can't get a current flashrom version to work on your computer i
recommend using the vendor tools instead of using the old version linux
mint provides. your log shows that 0.9.2 will probably not work.
--
*/_Ian Whitfield_/*/
*Pretoria, South Africa*
*Tel* - +27 (0)12 817 2001
*Cell* - +27 (0)82 573 9142
*Fax* - +27 (0)86 651 4844
*Skype* - ianzs6cdx
*SnailMail* - PO Box 72226, Lynnwood Ridge 0040 South Africa.
/(No trees were harmed in the production of this message, however
a large number of re-cycled electrons were temporarily inconvenienced) ////
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
