old output:
Calibrating delay loop... OK.
Found chipset "Intel QS57", enabling flash write... OK.
This chipset supports the following protocols: FWH, SPI.

new non-verbose output for tested chipsets:
Calibrating delay loop... OK.
Found chipset "Intel QS57". Enabling flash write... OK.
This chipset supports the following protocols: FWH, SPI.

new non-verbose output for untested chipsets:
Found chipset "Intel QS57".
This chipset is marked as untested. If you are using an up-to-date version
of flashrom please email a report to [email protected] including a
verbose (-V) log. Thank you!
Enabling flash write... OK.
This chipset supports the following protocols: FWH, SPI.

Signed-off-by: Stefan Tauner <[email protected]>
---
 chipset_enable.c |   19 ++++++++++++++-----
 1 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/chipset_enable.c b/chipset_enable.c
index c8aed07..ecb020c 100644
--- a/chipset_enable.c
+++ b/chipset_enable.c
@@ -1226,13 +1226,22 @@ int chipset_flash_enable(void)
                                        chipset_enables[i].device_name);
                        continue;
                }
-               msg_pinfo("Found chipset \"%s %s\", enabling flash write... ",
-                      chipset_enables[i].vendor_name,
-                      chipset_enables[i].device_name);
-               msg_pdbg("chipset PCI ID is %04x:%04x, ",
+               msg_pinfo("Found chipset \"%s %s\"",
+                         chipset_enables[i].vendor_name,
+                         chipset_enables[i].device_name);
+               msg_pdbg("with PCI ID %04x:%04x",
                         chipset_enables[i].vendor_id,
                         chipset_enables[i].device_id);
-
+               msg_pinfo(". ");
+
+               if (chipset_enables[i].status == NT) {
+                       msg_pinfo("\nThis chipset is marked as untested. If "
+                                 "you are using an up-to-date version\nof "
+                                 "flashrom please email a report to "
+                                 "[email protected] including a\nverbose "
+                                 "(-V) log. Thank you!\n");
+               }
+               msg_pinfo("Enabling flash write... ");
                ret = chipset_enables[i].doit(dev,
                                              chipset_enables[i].device_name);
                if (ret == NOT_DONE_YET) {
-- 
1.7.1


_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom

Reply via email to