Fix W29EE011 probing.
Signed-off-by: Carl-Daniel Hailfinger <[email protected]>
Index: flashrom-probe_w29ee011_fix/w29ee011.c
===================================================================
--- flashrom-probe_w29ee011_fix/w29ee011.c (Revision 1390)
+++ flashrom-probe_w29ee011_fix/w29ee011.c (Arbeitskopie)
@@ -22,16 +22,19 @@
#include "flash.h"
#include "chipdrivers.h"
+/* According to the Winbond W29EE011, W29EE012, W29C010M, W29C011A
+ * datasheets this is the only valid probe function for those chips.
+ */
int probe_w29ee011(struct flashchip *flash)
{
chipaddr bios = flash->virtual_memory;
uint8_t id1, id2;
- if (!chip_to_probe || strcmp(chip_to_probe, "W29EE011")) {
- msg_cdbg("Probing disabled for Winbond W29EE011 because "
+ if (!chip_to_probe || strcmp(chip_to_probe, flash->name)) {
+ msg_cdbg("Probing disabled for Winbond W29EE* because "
"the probing sequence puts the AMIC A49LF040A in "
- "a funky state. Use 'flashrom -c W29EE011' if you "
- "have a board with this chip.\n");
+ "a funky state. Use 'flashrom -c %s' if you "
+ "have a board with this chip.\n", flash->name);
return 0;
}
Index: flashrom-probe_w29ee011_fix/flashchips.c
===================================================================
--- flashrom-probe_w29ee011_fix/flashchips.c (Revision 1390)
+++ flashrom-probe_w29ee011_fix/flashchips.c (Arbeitskopie)
@@ -8323,7 +8323,7 @@
{
.vendor = "Winbond",
- .name = "W29C010(M)/W29C011A/W29EE011/W29EE012",
+ .name = "W29C010(M)/W29C011A/W29EE011/W29EE012-old",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W29C010,
--
http://www.hailfinger.org/
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
