On Mon, 8 Aug 2011 20:47:05 +0200 Kurt Jaeger <[email protected]> wrote:
> Hi! > > See below. > > flashrom v0.9.3-r1205 on FreeBSD 8.1-RELEASE (i386), built with libpci 3.1.7, > GCC 4.2.1 20070719 [FreeBSD], little endian > flashrom is free software, get the source code at http://www.flashrom.org > > […] > Found chip "Winbond W39V040(F)C" (512 KB, LPC) at physical address 0xfff80000. > printlock_w39v040c: Boot block #TBL is unlocked, rest of chip #WP is unlocked. > […] > This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE > The test status of this chip may have been updated in the latest development > version of flashrom. If you are running the latest development version, > please email a report to [email protected] if any of the above operations > work correctly for you with this flash part. Please include the flashrom > output with the additional -V option for all operations you tested (-V, -Vr, > -Vw, -VE), and mention which mainboard or programmer you tested. > Please mention your board in the subject line. Thanks for your help! > Reading flash... done. > hello kurt and thanks for your report! we have split that chip definition into two parts some time ago (the W39V040C version has an LPC interface, the W39V040FC is FWH-compatible; probably write protection also differs and that's the reason for said change, but i am not entirely sure). afaics your board/chipset configuration supports both buses, hence your report does not really help. a retest with the latest stable version (0.9.4) or a development snapshot would be appreciated! it would probably detect both chips and you would have to select the correct one. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
