Add support for the Dangerous Prototypes Bus Blaster (v1/v2).
The new type is called "busblaster".
So far only v2 has been tested, but since both v1 and v2
emulate a Amontec JTAGKEY in the default configuration,
it is assumed that v1 should work fine as well.
Information about the Busblaster can be found at:
http://dangerousprototypes.com/docs/Bus_Blaster
Signed-off-by: Steve Markgraf <[email protected]>
---
flashrom.8 | 4 ++--
ft2232_spi.c | 5 +++++
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/flashrom.8 b/flashrom.8
index 6556609..537b61e 100644
--- a/flashrom.8
+++ b/flashrom.8
@@ -440,8 +440,8 @@ type and interface/port it should support. For that
you have to use the
syntax where
.B model
can be
-.BR 2232H ", " 4232H ", " jtagkey ", " openmoko ", " arm-usb-tiny ", " \
-arm-usb-tiny-h ", " arm-usb-ocd " or " arm-usb-ocd-h
+.BR 2232H ", " 4232H ", " jtagkey ", " busblaster ", " openmoko ", " \
+arm-usb-tiny ", " arm-usb-tiny-h ", " arm-usb-ocd " or " arm-usb-ocd-h
and
.B interface
can be
diff --git a/ft2232_spi.c b/ft2232_spi.c
index 689f276..438e31d 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -173,6 +173,11 @@ int ft2232_spi_init(void)
ft2232_interface = INTERFACE_A;
cs_bits = 0x18;
pindir = 0x1b;
+ } else if (!strcasecmp(arg, "busblaster")) {
+ ft2232_type = FTDI_FT2232H_PID;
+ ft2232_interface = INTERFACE_A;
+ cs_bits = 0x18; /* is a jtagkey clone in its */
+ pindir = 0x1b; /* default configuration */
} else if (!strcasecmp(arg, "openmoko")) {
ft2232_vid = FIC_VID;
ft2232_type = OPENMOKO_DBGBOARD_PID;
--
1.7.4.1
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
