On Fri, 14 Oct 2011 19:55:10 +0100 Iain Paton <selsin...@gmail.com> wrote:
> Stefan Tauner wrote: > > > i have played with an unsupported intel nic too, see > > http://www.flashrom.org/pipermail/flashrom/2011-August/007475.html > > especially the second mail. > > lol.. I've just been reading those since I have in my other hand a 82546EB > based dual port PCI-X card with parallel rom on it. Of course the rom on that > isn't supported either :) > It's another Atmel, this time a .. trivially adding it to flashchips.c > isn't getting me anywhere, so I was just investigating the board enable stuff. AT49BV002A(N)'s ID is 0x07 afaics and that's equal to AT49F002(N)... hm. what did you try? does probing with the nicintel_spi code help? > > your problem sounds similar. maybe you need an enable procedure too > > (different from the one in nicintel_spi_init), > > could be.. > > > or you dont really have > > the at25f spi chip? > > while I'll admit that's possible, have a look and tell me what you think > http://imagebin.org/179023 the upload/site seems broken to me, but i guess you are able to read, so... (i was thinking of a possible misunderstanding on my side previously). :) > > i have not looked at the data sheet of (your) 82540EM (yet), but it > > might help if one does... ;) > > That very datasheet appears to be what was used to write the driver, the link > to it is in the top of nicintel_spi.c and that's where I got the hope that > it could maybe work :) that data sheet contains much more than that... and also parallel flash interface descriptions. but... appendix paragraph B.2 says: The 82540EP/EM does not support a parallel FLASH interface. so it is certainly not exactly the same problem i had; and i cant help you further right now, sorry. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list flashrom@flashrom.org http://www.flashrom.org/mailman/listinfo/flashrom
