Hello fellow developers,
attached is a private mail I received that contains a successful write
on a board with a MCP73 south bridge. The successful erase report by the
same author already went to the flashrom list. I guess, we can mark
MCP73 as tested now.
Regards,
Michael Karcher
--- Begin Message ---
Hallo
Habe das im Terminal ausgeführt. Ich hoffe das nützt was für das
Projekt?
Beste Grüße
"
marko@marko-desktop:~$ sudo flashrom -w Desktop/GF7100-M3_080707.ROM
[sudo] password for marko:
flashrom v0.9.4-r1394 on Linux 3.0.0-15-generic (i686), built with
libpci 3.1.7, GCC 4.6.1, little endian
flashrom is free software, get the source code at
http://www.flashrom.org
Calibrating delay loop... OK.
Found chipset "NVIDIA MCP73".
This chipset is marked as untested. If you are using an up-to-date
version
of flashrom please email a report to [email protected] including a
verbose (-V) log. Thank you!
Enabling flash write... This chipset is not really supported yet.
Guesswork...
SPI on this chipset is WIP. Please report any success or failure by
mailing us the verbose output to [email protected], thanks!
Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544.
Please send the output of "flashrom -V" to [email protected] with
your board name: flashrom -V as the subject to help us finish support
for your
chipset. Thanks.
OK.
This chipset supports the following protocols: SPI.
Found Winbond flash chip "W25X80" (1024 kB, SPI) at physical address
0xfff00000.
Flash image seems to be a legacy BIOS. Disabling coreboot-related
checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... VERIFIED.
marko@marko-desktop:~$
Beste Grüße
--- End Message ---
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
