Similar to modules using the opaque programmer framework (e.g. ICH Hardware Sequencing) this uses a generic struct flashchip element in flashchips.c with dummy values and a special probe function that fills the obtained values into that generic struct.
Documentation used: http://www.jedec.org/standards-documents/docs/jesd216 (2011-04) W25Q32BV data sheet Revision F (2011-04-01) EN25QH16 data sheet Revision F (2011-06-01) todo: - handle programmers which have a problem with the dummy bytes needed - move sfdp_add_uniform_eraser to flashchips.c? Signed-off-by: Stefan Tauner <stefan.tau...@student.tuwien.ac.at> --- Makefile | 2 +- chipdrivers.h | 4 + flash.h | 2 + flashchips.c | 24 ++++ flashchips.h | 1 + flashrom.c | 28 +++++- sfdp.c | 356 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ spi.h | 5 + spi25.c | 31 +++++ 9 files changed, 451 insertions(+), 2 deletions(-) create mode 100644 sfdp.c diff --git a/Makefile b/Makefile index 83aa038..b890d8a 100644 --- a/Makefile +++ b/Makefile @@ -252,7 +252,7 @@ endif CHIP_OBJS = jedec.o stm50flw0x0x.o w39.o w29ee011.o \ sst28sf040.o m29f400bt.o 82802ab.o pm49fl00x.o \ sst49lfxxxc.o sst_fwhub.o flashchips.o spi.o spi25.o sharplhf00l04.o \ - a25.o at25.o opaque.o + a25.o at25.o opaque.o sfdp.o LIB_OBJS = layout.o diff --git a/chipdrivers.h b/chipdrivers.h index a1d0cd9..bd81098 100644 --- a/chipdrivers.h +++ b/chipdrivers.h @@ -41,6 +41,7 @@ int spi_block_erase_d7(struct flashctx *flash, unsigned int addr, unsigned int b int spi_block_erase_d8(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_60(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_c7(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +erasefunc_t *spi_get_erasefn_from_opcode(uint8_t opcode); int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int spi_chip_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int spi_chip_read(struct flashctx *flash, uint8_t *buf, unsigned int start, int unsigned len); @@ -58,6 +59,9 @@ int spi_read_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, u int spi_write_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); int spi_aai_write(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); +/* sfdp.c */ +int probe_spi_sfdp(struct flashctx *flash); + /* opaque.c */ int probe_opaque(struct flashctx *flash); int read_opaque(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); diff --git a/flash.h b/flash.h index e51b6d4..6bcae71 100644 --- a/flash.h +++ b/flash.h @@ -174,6 +174,8 @@ struct flashctx { struct registered_programmer *pgm; }; +typedef int (erasefunc_t)(struct flashctx *flash, unsigned int addr, unsigned int blocklen); + #define TEST_UNTESTED 0 #define TEST_OK_PROBE (1 << 0) diff --git a/flashchips.c b/flashchips.c index ca1c57f..f0fde20 100644 --- a/flashchips.c +++ b/flashchips.c @@ -8872,6 +8872,30 @@ const struct flashchip flashchips[] = { .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program */ }, + + { + .vendor = "Unknown", + .name = "SFDP device", + .bustype = BUS_SPI, + .manufacture_id = GENERIC_MANUF_ID, + .model_id = SFDP_DEVICE_ID, + /* We present our own "report this" text hence we do not + * want the default "This flash part has status UNTESTED..." + * text to be printed. */ + .tested = TEST_OK_PREW, + .probe = probe_spi_sfdp, + .read = spi_chip_read, + /* FIXME: some vendor extensions define this */ + .voltage = {}, + /* Everything below will be set by the probing function. */ + .page_size = 0, + .write = NULL, + .total_size = 0, + .feature_bits = 0, + .block_erasers = {}, + .unlock = NULL, + .printlock = NULL, + }, { .vendor = "Programmer", diff --git a/flashchips.h b/flashchips.h index 03efb86..1f2a8ca 100644 --- a/flashchips.h +++ b/flashchips.h @@ -36,6 +36,7 @@ #define GENERIC_MANUF_ID 0xffff /* Check if there is a vendor ID */ #define GENERIC_DEVICE_ID 0xffff /* Only match the vendor ID */ +#define SFDP_DEVICE_ID 0xfffe #define ALLIANCE_ID 0x52 /* Alliance Semiconductor */ #define ALLIANCE_AS29F002B 0x34 diff --git a/flashrom.c b/flashrom.c index ee68344..84fb3fc 100644 --- a/flashrom.c +++ b/flashrom.c @@ -986,7 +986,33 @@ int probe_flash(struct registered_programmer *pgm, int startchip, * probe_flash() is the first one and thus no chip has been * found before. */ - if (startchip == 0 || fill_flash->model_id != GENERIC_DEVICE_ID) + if (startchip == 0 && fill_flash->model_id == SFDP_DEVICE_ID) { + msg_cinfo("===\n" + "SFDP has autodetected a flash chip which is " + "not natively supported by flashrom yet.\n"); + if (count_usable_erasers(fill_flash) == 0) + msg_cinfo("The standard operations read and " + "verify should work, but to support " + "erase, write and all other " + "possible features"); + else + msg_cinfo("All standard operations (read, " + "verify, erase and write) should " + "work, but to support all possible " + "features"); + + msg_cinfo(" we need to add them manually.\nYou " + "can help us by mailing us the output of " + "the following command to flashrom@flashrom." + "org: \n'flashrom -VV [plus the " + "-p/--programmer parameter (if needed)]" + "'\nThanks for your help!\n" + "===\n"); + } + + if (startchip == 0 || + ((fill_flash->model_id != GENERIC_DEVICE_ID) && + (fill_flash->model_id != SFDP_DEVICE_ID))) break; notfound: diff --git a/sfdp.c b/sfdp.c new file mode 100644 index 0000000..4687737 --- /dev/null +++ b/sfdp.c @@ -0,0 +1,356 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2011-2012 Stefan Tauner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include "flash.h" +#include "spi.h" +#include "chipdrivers.h" + +static int spi_sfdp_wrapper(struct flashctx *flash, uint32_t address, uint8_t *buf, int len) +{ + int i, ret; + const unsigned char cmd[JEDEC_SFDP_OUTSIZE] = { + JEDEC_SFDP, + (address >> 16) & 0xff, + (address >> 8) & 0xff, + (address >> 0) & 0xff, + 0 + }; + msg_cspew("spi_sfdp_wrapper: addr=0x%x, len=%d, data:\n", address, len); + ret = spi_send_command(flash, sizeof(cmd), len, cmd, buf); + for (i = 0; i < len; i++) + msg_cspew(" 0x%02x", buf[i]); + msg_cspew("\n"); + return ret; +} + +/* FIXME: eventually something similar like this but more generic should be + * available to split up spi commands. use that then instead */ +static int spi_sfdp(struct flashctx *flash, uint32_t address, uint8_t *buf, int len) +{ + /* FIXME: this is wrong. */ + int maxstep = 8; + int ret = 0; + while (len > 0) { + int step = min(len, maxstep); + ret = spi_sfdp_wrapper(flash, address, buf, step); + if (ret) + return ret; + address += step; + buf += step; + len -= step; + } + return ret; +} + +struct sfdp_tbl_hdr { + uint8_t id; + uint8_t v_minor; + uint8_t v_major; + uint8_t len; + uint32_t ptp; /* 24b pointer */ +}; + +static int sfdp_add_uniform_eraser(struct flashctx *f, uint8_t opcode, uint32_t bsize) +{ + uint32_t total_size = f->total_size * 1024; + int i; + erasefunc_t *erasefn = spi_get_erasefn_from_opcode(opcode); + if (erasefn == NULL) + return 1; + for (i = 0; i < NUM_ERASEFUNCTIONS; i++) { + struct block_eraser eraser = f->block_erasers[i]; + if (eraser.eraseblocks[0].size != 0) + continue; + eraser.block_erase = erasefn; + eraser.eraseblocks[0].size = bsize; + eraser.eraseblocks[0].count = total_size/bsize; + msg_cdbg2(" Block eraser %d: %d x %d B with opcode " + "0x%02x\n", i, total_size/bsize, bsize, + opcode); + return 0; + } + msg_cinfo("%s: Not enough space to store another eraser (i=%d)." + " Please report this at flashrom@flashrom.org\n", + __func__, i); + return 1; +} + +static int sfdp_fill_flash(struct flashctx *f, uint8_t *buf, uint16_t len) +{ + uint32_t tmp32; + uint8_t tmp8; + uint32_t total_size; /* in bytes */ + uint32_t bsize; + uint8_t opcode_4k = 0xFF; + int dw, j; + + msg_cdbg2("Parsing JEDEC SFDP parameter table...\n"); + if (len != 9 * 4 && len != 4 * 4) { + msg_cerr("%s: len out of spec\n", __func__); + return 1; + } + + /* 1. double word */ + dw = 0; + tmp32 = buf[(4 * dw) + 0]; + tmp32 |= ((unsigned int)buf[(4 * dw) + 1]) << 8; + tmp32 |= ((unsigned int)buf[(4 * dw) + 2]) << 16; + tmp32 |= ((unsigned int)buf[(4 * dw) + 3]) << 24; + + tmp8 = (tmp32 >> 17) & 0x3; + switch (tmp8) { + case 0x0: + msg_cdbg2(" 3-Byte only addressing.\n"); + break; + case 0x1: + msg_cdbg2(" 3-Byte (and optionally 4-Byte) addressing.\n"); + break; + case 0x2: + msg_cdbg(" 4-Byte only addressing not supported.\n"); + return 1; + default: + msg_cdbg(" Required addressing mode (0x%x) not supported.\n", + tmp8); + return 1; + } + + msg_cdbg2(" Writes to the status register have "); + if (tmp32 & (1 << 3)) { + f->unlock = spi_disable_blockprotect; + msg_cdbg2("to be enabled with "); + if (tmp32 & (1 << 4)) { + f->feature_bits = FEATURE_WRSR_WREN; + msg_cdbg2("WREN (0x06).\n"); + } else { + f->feature_bits = FEATURE_WRSR_EWSR; + msg_cdbg2("EWSR (0x50).\n"); + } + } else + msg_cdbg2("not to be especially enabled.\n"); + + msg_cdbg2(" Write granularity is "); + if (tmp32 & (1 << 2)) { + msg_cdbg2(" at least 64 B.\n"); + f->page_size = 64; + f->write = spi_chip_write_256; + } else { + msg_cdbg2(" 1 B only.\n"); + f->page_size = 256; /* ? */ + f->write = spi_chip_write_1; + } + + if ((tmp32 & 0x3) == 0x1) { + opcode_4k = (tmp32 >> 8) & 0xFF; /* will be dealt with later */ + } + + /* 2. double word */ + dw = 1; + tmp32 = buf[(4 * dw) + 0]; + tmp32 |= ((unsigned int)buf[(4 * dw) + 1]) << 8; + tmp32 |= ((unsigned int)buf[(4 * dw) + 2]) << 16; + tmp32 |= ((unsigned int)buf[(4 * dw) + 3]) << 24; + + if (tmp32 & (1 << 31)) { + msg_cerr(" Flash chip size >= 4 Gb/500 MB not supported.\n"); + return 1; + } + total_size = (tmp32 & 0x7FFFFFFF) / 8; + f->total_size = total_size / 1024; + msg_cdbg2(" Flash chip size is %d kB.\n", f->total_size); + + /* FIXME: double words 3-7 contain unused fast read information */ + + if (len == 4 * 4) { + msg_cdbg("It seems like this chip supports the preliminary " + "Intel version of SFDP, skipping processing of double " + "words 3-9.\n"); + goto proc_4k; + } + + dw = 8; + for (j = 0; j < 4; j++) { + /* 8 double words from the start + 2 words for every eraser */ + tmp32 = buf[(4 * dw) + (2 * j)]; + if (tmp32 == 0) { + msg_cdbg2(" Block eraser %d is unused.\n", j); + continue; + } + if (tmp32 >= 31) { + msg_cdbg2(" Block size of eraser %d (2^%d) is too big." + "\n", j, tmp32); + continue; + } + bsize = 1 << (tmp32); /* bsize = 2 ^ field */ + + tmp8 = buf[(4 * dw) + (2 * j) + 1]; + if(sfdp_add_uniform_eraser(f, tmp8, bsize)) + continue; + /* If there is a valid 4k value in the last double words, + * we want to override the value from double word 1, hence force + * skipping its processing: */ + if (bsize == 4 * 1024) + opcode_4k = 0xFF; + } + +proc_4k: + if (opcode_4k != 0xFF) { + sfdp_add_uniform_eraser(f, opcode_4k, 4 * 1024); + } + return 0; +} + +static int sfdp_fetch_pt(struct flashctx *flash, uint32_t addr, uint8_t *buf, uint16_t len) +{ + uint16_t i; + if (spi_sfdp(flash, addr, buf, len)) { + msg_cerr("Receiving SFDP parameter table failed.\n"); + return 1; + } + msg_cspew(" Parameter table contents:\n"); + for(i = 0; i < len; i++) { + if ((i % 8) == 0) { + msg_cspew(" 0x%03x: ", i); + } + msg_cspew(" 0x%02x", buf[i]); + if ((i % 8) == 7) { + msg_cspew("\n"); + continue; + } + if ((i % 8) == 3) { + msg_cspew(" "); + continue; + } + } + msg_cspew("\n"); + return 0; +} + +int probe_spi_sfdp(struct flashctx *flash) +{ + int ret = 0; + uint8_t buf[8]; + uint32_t tmp32; + uint8_t nph; + /* need to limit the table loop by comparing i to uint8_t nph hence: */ + uint16_t i; + struct sfdp_tbl_hdr *hdrs; + uint8_t *hbuf; + uint8_t *tbuf; + + if (spi_sfdp(flash, 0x00, buf, 4)) { + msg_cerr("Receiving SFDP signature failed.\n"); + return 0; + } + tmp32 = buf[0]; + tmp32 |= ((unsigned int)buf[1]) << 8; + tmp32 |= ((unsigned int)buf[2]) << 16; + tmp32 |= ((unsigned int)buf[3]) << 24; + + msg_cdbg2("SFDP signature = 0x%08x (should be 0x50444653)\n", tmp32); + if (tmp32 != 0x50444653) { + msg_cdbg("No SFDP signature found.\n"); + return 0; + } + if (spi_sfdp(flash, 0x04, buf, 3)) { + msg_cerr("Receiving SFDP revision and number of parameter " + "headers (NPH) failed. "); + return 0; + } + msg_cdbg2("SFDP revision = %d.%d\n", buf[1], buf[0]); + nph = buf[2]; + msg_cdbg2("SFDP number of parameter headers (NPH) = %d (+ 1 mandatory)" + "\n", nph); + + /* Fetch all parameter headers, even if we don't use them all (yet). */ + hbuf = malloc(sizeof(struct sfdp_tbl_hdr) * (nph + 1)); + hdrs = malloc((nph + 1) * 8); + if (hbuf == NULL || hdrs == NULL ) { + msg_gerr("Out of memory!\n"); + exit(1); /* FIXME: shutdown gracefully */ + } + if (spi_sfdp(flash, 0x08, hbuf, (nph + 1) * 8)) { + msg_cerr("Receiving SFDP parameter table headers failed.\n"); + goto cleanup_hdrs; + } + + i = 0; + do { + uint16_t len; + hdrs[i].id = hbuf[(8 * i) + 0]; + hdrs[i].v_minor = hbuf[(8 * i) + 1]; + hdrs[i].v_major = hbuf[(8 * i) + 2]; + hdrs[i].len = hbuf[(8 * i) + 3]; + hdrs[i].ptp = hbuf[(8 * i) + 4]; + hdrs[i].ptp |= ((unsigned int)hbuf[(8 * i) + 5]) << 8; + hdrs[i].ptp |= ((unsigned int)hbuf[(8 * i) + 6]) << 16; + msg_cdbg2("SFDP parameter table header %d/%d:\n", i, nph); + msg_cdbg2(" ID 0x%02x, version %d.%d\n", hdrs[i].id, + hdrs[i].v_major, hdrs[i].v_minor); + len = hdrs[i].len * 4; + tmp32 = hdrs[i].ptp; + msg_cdbg2(" Length %d B, Parameter Table Pointer 0x%06x\n", + len, tmp32); + + if (len + tmp32 > UINT16_MAX) { + msg_cerr("SFDP Parameter Table %d supposedly " + "overflows addressable SFDP area. This most\n" + "probably indicates a corrupt SFDP parameter " + "table header. Aborting SFDP probe!\n", i); + ret = 0; + goto cleanup_hdrs; + } + + tbuf = malloc(len); + if (tbuf == NULL) { + msg_gerr("Out of memory!\n"); + exit(1); /* FIXME: shutdown gracefully */ + } + if (sfdp_fetch_pt(flash, tmp32, tbuf, len)){ + msg_cerr("Fetching SFDP parameter table %d failed.\n", + i); + free(tbuf); + break; + } + if (i == 0) { /* Mandatory JEDEC SFDP parameter table */ + if (hdrs[i].id != 0) + msg_cdbg("ID of the mandatory JEDEC SFDP " + "parameter table is not 0 as demanded " + "by JESD216 (warning only).\n"); + + if (len != 9 * 4 && len != 4 * 4) { + msg_cdbg("Length of the mandatory JEDEC SFDP " + "parameter table is %d B instead of " + "36 B (i.e. 9 double words) as " + "demanded by JESD216, skipping " + "parsing.\n", len); + } else if (sfdp_fill_flash(flash, tbuf, len) == 0) + ret = 1; + } + + free(tbuf); + i++; + } while(i <= nph); + +cleanup_hdrs: + free(hdrs); + free(hbuf); + return ret; +} diff --git a/spi.h b/spi.h index b908603..5f07eae 100644 --- a/spi.h +++ b/spi.h @@ -40,6 +40,11 @@ #define JEDEC_REMS_OUTSIZE 0x04 #define JEDEC_REMS_INSIZE 0x02 +/* Read Serial Flash Discoverable Parameters (SFDP) */ +#define JEDEC_SFDP 0x5a +#define JEDEC_SFDP_OUTSIZE 0x05 /* 8b op, 24b addr, 8b dummy */ +/* JEDEC_SFDP_INSIZE : any length */ + /* Read Electronic Signature */ #define JEDEC_RES 0xab #define JEDEC_RES_OUTSIZE 0x04 diff --git a/spi25.c b/spi25.c index 3ce7f08..15ec300 100644 --- a/spi25.c +++ b/spi25.c @@ -720,6 +720,37 @@ int spi_block_erase_c7(struct flashctx *flash, unsigned int addr, return spi_chip_erase_c7(flash); } +erasefunc_t *spi_get_erasefn_from_opcode(uint8_t opcode) +{ + switch(opcode){ + case 0x00: + case 0xff: + /* Not specified, assuming "not supported". */ + return NULL; + case 0x20: + return &spi_block_erase_20; + break; + case 0x52: + return &spi_block_erase_52; + break; + case 0x60: + return &spi_block_erase_60; + break; + case 0xc7: + return &spi_block_erase_c7; + break; + case 0xd7: + return &spi_block_erase_d7; + break; + case 0xd8: + return &spi_block_erase_d8; + default: + msg_cinfo("%s: unknown erase opcode (0x%02x). Please report " + "this at flashrom@flashrom.org\n", __func__, opcode); + return NULL; + } +} + int spi_write_status_enable(struct flashctx *flash) { static const unsigned char cmd[JEDEC_EWSR_OUTSIZE] = { JEDEC_EWSR }; -- 1.7.1 _______________________________________________ flashrom mailing list flashrom@flashrom.org http://www.flashrom.org/mailman/listinfo/flashrom
