On Sun, 11 Mar 2012 15:19:03 -0700 Svetoslav Trochev <[email protected]> wrote:
> 0x50: 0x00000a0b (FRAP) > BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b > 0x54: 0x000f0000 FREG0: WARNING: Flash Descriptor region > (0x00000000-0x0000ffff) is read-only. > 0x58: 0x07ff0400 FREG1: BIOS region (0x00400000-0x007fffff) is read-write. > 0x5C: 0x03ff0010 FREG2: WARNING: Management Engine region > (0x00010000-0x003fffff) is locked. > Please send a verbose log to [email protected] if this board is not > listed on > http://flashrom.org/Supported_hardware#Supported_mainboards yet. > Writes have been disabled. You can enforce write support with the > ich_spi_force programmer option, but it will most likely harm your hardware! > If you force flashrom you will get no support if something breaks. > Hi Stefan and everybody here, > > Today, I tested this board with flashrom v0.9.5.2 again and looks like > it needs "Board-Enable" code in order to unlock the flash ship. I am > attaching the output log from '-Vr' operation that failed. What else I > can do to help? there is no need for a board enable but for additional code in the chipset support (there are many more boards like yours with exactly the same problem, hence the warning above). i have posted more information about locked ME regions yesterday here: http://www.flashrom.org/pipermail/flashrom/2012-March/008964.html -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
