On Sat, 10 Mar 2012 21:10:06 +0100 Kim Johansson <[email protected]> wrote:
> flashrom v0.9.5.2-r1516 on Linux 2.6.35 (i686), built with libpci 2.2.10, GCC > 4.2.4, little endian > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OS timer resolution is 1 usecs, 1276M loops per > second, delay more than 10% too short (got 85% of expected delay), > recalculating... 1271M loops per second, delay more than 10% too short (got > 85% of expected delay), recalculating... 1279M loops per second, delay more > than 10% too short (got 85% of expected delay), recalculating... 1296M loops > per second, delay more than 10% too short (got 86% of expected delay), > recalculating... 1280M loops per second, 10 myus = 8 us, 100 myus = 85 us, > 1000 myus = 929 us, 10000 myus = 16865 us, 4 myus = 4 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: "MICRO-STAR INTERNATIONAL CO.,LTD" > DMI string system-product-name: "MS-7597" > DMI string system-version: "1.0" > DMI string baseboard-manufacturer: "MICRO-STAR INTERNATIONAL CO.,LTD" > DMI string baseboard-product-name: "GF615M-P33 (MS-7597)" > DMI string baseboard-version: "1.0" > DMI string chassis-type: "Desktop" > Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash write... > This chipset is not really supported yet. Guesswork... > ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 > Flash bus type is SPI > SPI on this chipset is WIP. Please report any success or failure by mailing > us the verbose output to [email protected], thanks! > Found SMBus device 10de:03eb at 00:01:1 > MCP SPI BAR is at 0xfec80000 > SPI control is 0x0012, req=0, gnt=0 > Please send the output of "flashrom -V" to [email protected] with > your board name: flashrom -V as the subject to help us finish support for your > chipset. Thanks. > OK. > The following protocols are supported: SPI. > […] > No EEPROM/flash device found. > Note: flashrom can never write if the flash chip isn't found automatically. hello kim and thanks for your report! your log looks suspicious, maybe you have found a bug in our MCP61 code or the flash is not attached to the southbridge, but the fintek chip. could you please send us the output of "superiotool -dV", thanks. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
