On Wed, 18 Apr 2012 12:32:16 -0400 "Douglas Miller" <[email protected]> wrote:
> FYI - THANKS! > > AT25DF161 found on the Intel Desktop Board DN2800MT (Marshalltown) not > working. > > flashrom v0.9.5.2-r1523 on Linux 2.6.30.10-105.2.23.fc11.i686.PAE > (i686), built with libpci 3.1.6, GCC 4.4.1 20090725 (Red Hat 4.4.1-2), > little endian > flashrom is free software, get the source code at > http://www.flashrom.org > > Calibrating delay loop... OS timer resolution is 2 usecs, 619M loops per > second, 10 myus = 11 us, 100 myus = 107 us, 1000 myus = 1002 us, 10000 > myus = 9989 us, 8 myus = 8 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: " " > DMI string system-product-name: " " > DMI string system-version: " " > DMI string baseboard-manufacturer: "Intel Corporation" > DMI string baseboard-product-name: "DN2800MT" > DMI string baseboard-version: "AAG23738-600" > DMI string chassis-type: "Desktop" > Found chipset "Intel NM10" with PCI ID 8086:27bc. Enabling flash > write... > […] > BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0xe > WARNING: Setting 0xdc from 0xe to 0xf on NM10 failed. New value is 0xe. > Root Complex Register Block address = 0xfed1c000 > GCS = 0x61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x0 > (reserved) > […] > SPI Read Configuration: invalid prefetching/caching settings, PROBLEMS, > continuing anyway > The following protocols are supported: SPI. > […] > Found Atmel flash chip "AT25DF161" (2048 kB, SPI). > === > This flash part has status UNTESTED for operations: PROBE READ ERASE > WRITE > The test status of this chip may have been updated in the latest > development > version of flashrom. If you are running the latest development version, > please email a report to [email protected] if any of the above > operations > work correctly for you with this flash part. Please include the flashrom > output with the additional -V option for all operations you tested (-V, > -Vr, > -VE, -Vw), and mention which mainboard or programmer you tested. > Please mention your board in the subject line. Thanks for your help! > No operations were specified. > Restoring MMIO space at 0xb7800070 > Restoring PCI config space for 00:1f:0 reg 0xdc Hello Douglas, thanks for your report! I have marked the flash chip as probing successfully and will commit that later together with other small changes. The board itself has a few wrong settings as discussed on IRC (IIRC :), but the insurmountable problem for flashrom is the lock in BIOS_CNTL. Therefore i have added the board to our list of (un)supported boards, thanks. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
