Hi folks,
that's the output of flashrom -V on my system
Bios version is 0112
Reading and verifying works fine, writing/erasing doesn't.
cheers, Felix Blendinger
flashrom v0.9.5.2-r1515 on Linux 3.2.0-2-686-pae (i686), built with
libpci 3.1.9, GCC 4.6.3, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 2 usecs, 855M loops per
second, 10 myus = 12 us, 100 myus = 99 us, 1000 myus = 999 us, 10000
myus = 14186 us, 8 myus = 9 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "ASUSTeK Computer INC."
DMI string system-product-name: "M2N-MX"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "M2N-MX"
DMI string baseboard-version: "Rev 1.xx"
DMI string chassis-type: "Desktop"
Found ITE Super I/O, ID 0x8712 on port 0x2e
Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash
write... This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0
Flash bus type is LPC
Found SMBus device 10de:03eb at 00:01:1
MCP SPI BAR is at 0x40000000
Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI
enabled.
Please send the output of "flashrom -V" to [email protected] with
your board name: flashrom -V as the subject to help us finish support
for your
chipset. Thanks.
OK.
Super I/O ID 0x8712 is not on the list of flash capable controllers.
The following protocols are supported: LPC.
Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x58, id2 0xee,
id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Found SST flash chip "SST49LF040B" (512 kB, LPC) at physical address
0xfff80000.
Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Found SST flash chip "SST49LF040B" (512 kB, LPC).
No operations were specified.
Restoring PCI config space for 00:01:0 reg 0x6d
Restoring PCI config space for 00:01:0 reg 0x90
Restoring PCI config space for 00:01:0 reg 0x8c
Restoring PCI config space for 00:01:0 reg 0x88
root@fbock:/usr/local/src/flashrom-0.9.5.2# ./flashrom
flashrom v0.9.5.2-r1515 on Linux 3.2.0-2-686-pae (i686), built with
libpci 3.1.9, GCC 4.6.3, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK.
Found chipset "NVIDIA MCP61". Enabling flash write... This chipset is
not really supported yet. Guesswork...
Please send the output of "flashrom -V" to [email protected] with
your board name: flashrom -V as the subject to help us finish support
for your
chipset. Thanks.
OK.
Found SST flash chip "SST49LF040B" (512 kB, LPC) at physical address
0xfff80000.
No operations were specified.
root@fbock:/usr/local/src/flashrom-0.9.5.2# ./flashrom -V
flashrom v0.9.5.2-r1515 on Linux 3.2.0-2-686-pae (i686), built with
libpci 3.1.9, GCC 4.6.3, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 2 usecs, 786M loops per
second, 10 myus = 11 us, 100 myus = 91 us, 1000 myus = 918 us, 10000
myus = 16481 us, 8 myus = 9 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "ASUSTeK Computer INC."
DMI string system-product-name: "M2N-MX"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "M2N-MX"
DMI string baseboard-version: "Rev 1.xx"
DMI string chassis-type: "Desktop"
Found ITE Super I/O, ID 0x8712 on port 0x2e
Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash
write... This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0
Flash bus type is LPC
Found SMBus device 10de:03eb at 00:01:1
MCP SPI BAR is at 0x40000000
Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI
enabled.
Please send the output of "flashrom -V" to [email protected] with
your board name: flashrom -V as the subject to help us finish support
for your
chipset. Thanks.
OK.
Super I/O ID 0x8712 is not on the list of flash capable controllers.
The following protocols are supported: LPC.
Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x58, id2 0xee,
id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Found SST flash chip "SST49LF040B" (512 kB, LPC) at physical address
0xfff80000.
Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Found SST flash chip "SST49LF040B" (512 kB, LPC).
No operations were specified.
Restoring PCI config space for 00:01:0 reg 0x6d
Restoring PCI config space for 00:01:0 reg 0x90
Restoring PCI config space for 00:01:0 reg 0x8c
Restoring PCI config space for 00:01:0 reg 0x88
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
