For older versions of libftdi we define TYPE_232H ourselves and this seems to be enough to get at least basic support.
Signed-off-by: Ilya A. Volynets-Evenbakh <[email protected]> Signed-off-by: Stefan Tauner <[email protected]> --- Makefile | 12 ++++++++++++ flashrom.8 | 6 +++--- ft2232_spi.c | 13 ++++++++++++- 3 files changed, 27 insertions(+), 4 deletions(-) diff --git a/Makefile b/Makefile index 9309ce5..b992c5e 100644 --- a/Makefile +++ b/Makefile @@ -463,6 +463,7 @@ ifeq ($(CONFIG_FT2232_SPI), yes) FTDILIBS := $(shell pkg-config --libs libftdi 2>/dev/null || printf "%s" "-lftdi -lusb") # This is a totally ugly hack. FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_FT2232_SPI=1'") +FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FT232H := yes" .features && printf "%s" "-D'HAVE_FT232H=1'") FEATURE_LIBS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)") PROGRAMMER_OBJS += ft2232_spi.o endif @@ -717,6 +718,12 @@ int main(int argc, char **argv) endef export FTDI_TEST +define FTDI_232H_TEST +#include <ftdi.h> +enum ftdi_chip_type type = TYPE_232H; +endef +export FTDI_232H_TEST + define UTSNAME_TEST #include <sys/utsname.h> struct utsname osinfo; @@ -751,6 +758,11 @@ ifeq ($(CONFIG_FT2232_SPI), yes) @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >/dev/null 2>&1 && \ ( echo "found."; echo "FTDISUPPORT := yes" >> .features.tmp ) || \ ( echo "not found."; echo "FTDISUPPORT := no" >> .features.tmp ) + @printf "Checking for FT232H support in libftdi... " + @echo "$$FTDI_232H_TEST" >> .featuretest.c + @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >/dev/null 2>&1 && \ + ( echo "found."; echo "FT232H := yes" >> .features.tmp ) || \ + ( echo "not found."; echo "FT232H := no" >> .features.tmp ) endif ifeq ($(CONFIG_LINUX_SPI), yes) @printf "Checking if Linux SPI headers are present... " diff --git a/flashrom.8 b/flashrom.8 index 1699f2a..19506a3 100644 --- a/flashrom.8 +++ b/flashrom.8 @@ -15,7 +15,7 @@ chips. It's often used to flash BIOS/EFI/coreboot/firmware images in-system using a supported mainboard. However, it also supports various external PCI/USB/parallel-port/serial-port based devices which can program flash chips, including some network cards (NICs), SATA/IDE controller cards, graphics cards, -the Bus Pirate device, various FTDI FT2232/FT4232H based USB devices, and more. +the Bus Pirate device, various FTDI FT2232/FT4232H/FT232H based USB devices, and more. .PP It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, TSOP40, TSOP48, and BGA chips, which use various protocols such as LPC, FWH, @@ -189,7 +189,7 @@ cards)" .sp .BR "* atahpt" " (for flash ROMs on Highpoint ATA/RAID controllers)" .sp -.BR "* ft2232_spi" " (for SPI flash ROMs attached to an FT2232/FT4232H family \ +.BR "* ft2232_spi" " (for SPI flash ROMs attached to an FT2232/FT4232H/FT232H family \ based USB SPI programmer), including the DLP Design DLP-USB1232H, \ FTDI FT2232H Mini-Module, FTDI FT4232H Mini-Module, openbiosprog-spi, Amontec \ JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, \ @@ -561,7 +561,7 @@ type and channel/interface/port it should support. For that you have to use the syntax where .B model can be -.BR 2232H ", " 4232H ", " jtagkey ", " busblaster ", " openmoko ", " \ +.BR 2232H ", " 4232H ", " 232H ", " jtagkey ", " busblaster ", " openmoko ", " \ arm-usb-tiny ", " arm-usb-tiny-h ", " arm-usb-ocd ", " arm-usb-ocd-h \ ", " tumpa ", or " picotap and diff --git a/ft2232_spi.c b/ft2232_spi.c index 0e18a0c..43a95e9 100644 --- a/ft2232_spi.c +++ b/ft2232_spi.c @@ -30,11 +30,18 @@ #include "spi.h" #include <ftdi.h> +/* This is not defined in libftdi.h <0.20 (c7e4c09e68cfa6f5e112334aa1b3bb23401c8dc7 to be exact). + * Some tests indicate that his is the only change that it is needed to support the FT232H in flashrom. */ +#if !defined(HAVE_FT232H) +#define TYPE_232H 6 +#endif + /* Please keep sorted by vendor ID, then device ID. */ #define FTDI_VID 0x0403 #define FTDI_FT2232H_PID 0x6010 #define FTDI_FT4232H_PID 0x6011 +#define FTDI_FT232H_PID 0x6014 #define TIAO_TUMPA_PID 0x8a98 #define AMONTEC_JTAGKEY_PID 0xCFF8 @@ -53,6 +60,7 @@ const struct usbdev_status devs_ft2232spi[] = { {FTDI_VID, FTDI_FT2232H_PID, OK, "FTDI", "FT2232H"}, {FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"}, + {FTDI_VID, FTDI_FT232H_PID, OK, "FTDI", "FT232H"}, {FTDI_VID, TIAO_TUMPA_PID, OK, "TIAO", "USB Multi-Protocol Adapter"}, {FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"}, {GOEPEL_VID, GOEPEL_PICOTAP_PID, OK, "GOEPEL", "PicoTAP"}, @@ -190,6 +198,9 @@ int ft2232_spi_init(void) } else if (!strcasecmp(arg, "4232H")) { ft2232_type = FTDI_FT4232H_PID; channel_count = 4; + } else if (!strcasecmp(arg, "232H")) { + ft2232_type = FTDI_FT232H_PID; + channel_count = 1; } else if (!strcasecmp(arg, "jtagkey")) { ft2232_type = AMONTEC_JTAGKEY_PID; channel_count = 2; @@ -312,7 +323,7 @@ int ft2232_spi_init(void) return -4; } - if (ftdic->type != TYPE_2232H && ftdic->type != TYPE_4232H) { + if (ftdic->type != TYPE_2232H && ftdic->type != TYPE_4232H && ftdic->type != TYPE_232H) { msg_pdbg("FTDI chip type %d is not high-speed\n", ftdic->type); clock_5x = 0; -- Kind regards, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
