06.09.2012 04:38 tarihinde, Stefan Tauner yazdı: > On Wed, 05 Sep 2012 20:34:20 +0300 > Olcay Korkmaz <[email protected]> wrote: > >> Hello >> >> I have a acer aspire 5315 and here is verbose log and extra info >> >> Reagards. >> >> extra info from bios release notes : >> KBC ................ ENE926 >> Super I/O ................ NONE >> BIOS ROM Part ................ MX25LV008BB > there is no such flash chip known to us (or google, except for other > pastes of similar release notes :) > anyway i guess the flash chip is behind the ENE controller (you can > verify that by searching for a schematic of that mainboard) and you > need support for that which does not exist and wont exist in the near > future, sorry. I checked locally on laptop for what's written on flash chip that's correct label of chip was mx25l but can't read other parts of label I do not need to flashing bios it already flashed works fine anyway I just want to report and I know laptops difficult to you flashrom is great tool and worked fine on my nforce board and own property flashing tool was totally trash I can't trust on that :)
Regards. > >> verbose log > that log made a minor cosmetic bug visible (see below) which i fixed > locally already, thanks! > >> flashrom v0.9.6.1-runknown on Linux 3.4.6-pmagic (i686) >> flashrom was built with libpci 3.1.8, GCC 4.6.3, little endian >> Command line (5 args): flashrom -V -p >> internal:laptop=this_is_not_a_laptop -o acer.txt >> Calibrating delay loop... OS timer resolution is 2 usecs, 1710M loops >> per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 1001 us, >> 10000 myus = 10083 us, 8 myus = 10 us, OK. >> Initializing internal programmer >> No coreboot table found. >> DMI string system-manufacturer: "Acer " >> DMI string system-product-name: "Aspire 5315 " >> DMI string system-version: "V1.45" >> DMI string baseboard-manufacturer: "Acer " >> DMI string baseboard-product-name: "Acadia " >> DMI string baseboard-version: "V1.45" >> DMI string chassis-type: "Other" >> DMI chassis-type is not specific enough. >> ======================================================================== >> WARNING! You may be running flashrom on an unsupported laptop. We could >> not detect this for sure because your vendor has not setup the SMBIOS >> tables correctly. You can enforce execution by adding >> '-p internal:laptop=this_is_not_a_laptop' to the command line, but >> please read the following warning if you are not sure. >> >> Laptops, notebooks and netbooks are difficult to support and we >> recommend to use the vendor flashing utility. The embedded controller >> (EC) in these machines often interacts badly with flashing. >> See http://www.flashrom.org/Laptops for details. >> >> If flash is shared with the EC, erase is guaranteed to brick your laptop >> and write may brick your laptop. >> Read and probe may irritate your EC and cause fan failure, backlight >> failure and sudden poweroff. >> You have been warned. >> ======================================================================== >> Proceeding anyway because user forced us to. >> Found chipset "Intel ICH8M" with PCI ID 8086:2815. Enabling flash write... >> 0xfff80000/0xffb80000 FWH IDSEL: 0x0 >> 0xfff00000/0xffb00000 FWH IDSEL: 0x0 >> 0xffe80000/0xffa80000 FWH IDSEL: 0x1 >> 0xffe00000/0xffa00000 FWH IDSEL: 0x1 >> 0xffd80000/0xff980000 FWH IDSEL: 0x2 >> 0xffd00000/0xff900000 FWH IDSEL: 0x2 >> 0xffc80000/0xff880000 FWH IDSEL: 0x3 >> 0xffc00000/0xff800000 FWH IDSEL: 0x3 >> 0xff700000/0xff300000 FWH IDSEL: 0x4 >> 0xff600000/0xff200000 FWH IDSEL: 0x5 >> 0xff500000/0xff100000 FWH IDSEL: 0x6 >> 0xff400000/0xff000000 FWH IDSEL: 0x7 >> 0xfff80000/0xffb80000 FWH decode enabled >> 0xfff00000/0xffb00000 FWH decode enabled >> 0xffe80000/0xffa80000 FWH decode enabled >> 0xffe00000/0xffa00000 FWH decode enabled >> 0xffd80000/0xff980000 FWH decode enabled >> 0xffd00000/0xff900000 FWH decode enabled >> 0xffc80000/0xff880000 FWH decode enabled >> 0xffc00000/0xff800000 FWH decode enabled >> 0xff700000/0xff300000 FWH decode disabled >> 0xff600000/0xff200000 FWH decode disabled >> 0xff500000/0xff100000 FWH decode disabled >> 0xff400000/0xff000000 FWH decode disabled >> Maximum FWH chip size: 0x100000 bytes >> BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled >> Root Complex Register Block address = 0xfed1c000 >> GCS = 0x9a0c60: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: >> 0x3 (LPC) >> Top Swap : not enabled >> SPIBAR = 0xfed1c000 + 0x3020 >> 0x04: 0x2000 (HSFS) >> HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=0, SCIP=0, FDOPSS=1, FDV=0, FLOCKDN=0 > FDV=0 means flash descriptors are disabled... > >> Programming OPCODES... >> program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 >> done >> OP Type Pre-OP >> op[0]: 0x02, write w/ addr, none >> op[1]: 0x03, read w/ addr, none >> op[2]: 0xd8, write w/ addr, none >> op[3]: 0x05, read w/o addr, none >> op[4]: 0x90, read w/ addr, none >> op[5]: 0x01, write w/o addr, none >> op[6]: 0x9f, read w/o addr, none >> op[7]: 0xc7, write w/o addr, none >> Pre-OP 0: 0x06, Pre-OP 1: 0x50 >> 0x08: 0x00000000 (FADDR) >> 0x74: 0x00000000 (PR0 is unused) >> 0x78: 0x00000000 (PR1 is unused) >> 0x7C: 0x00000000 (PR2 is unused) >> 0x80: 0x00000000 (PR3 is unused) >> 0x84: 0x00000000 (PR4 is unused) > those PR outpus shouldnt be printed if the board is not in descriptor > mode. > -- |By Olcay Korkmaz| _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
