Hi Stefan,
It seems like I am missing something : bibi@k9n6sgm-v:~/flashrom$ sudo flashrom -V flashrom v0.9.6.1-r1599 on Linux 3.2.0-30-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.8, GCC 4.6.3, little endian Command line (1 args): flashrom -V Please select a programmer with the --programmer parameter. Valid choices are: internal, dummy, nic3com, nicrealtek, gfxnvidia, drkaiser, satasii, ft2232_spi, serprog, buspirate_spi, rayer_spi, pony_spi, nicintel, nicintel_spi, ogp_spi, satamv, linux_spi I applied the patch with the command : patch < Fintek-SPI-driver-based-off-it87spi.patch What is wrong ?! Thanks for your help. Benoit 2012/9/15 Stefan Tauner <[email protected]>: > Hi! > > Thanks for the log. It seems like your board uses a superio chip that > is not supported by flashrom yet. > Carl-Daniel is working on a patch for it, but it does (or should) only > detect that chip at the moment - it does not enable read or write > access yet. Please do not expect flashrom to work on that board soon, sorry. > > If you want to help us add support for that board please get the source > of flashrom from http://flashrom.org/Downloads#Installation_from_source > apply the patch below, compile it and reply with a verbose log again. > If you need help with that just ask or visit our IRC channel (#flashrom > on chat.freenode.net). > > the current patch: http://patchwork.coreboot.org/patch/3713/ > > -- > Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
