2012/10/16 zz z <[email protected]>: > Hello flashrom's developers: > > I want to save my ethernet adapter. > > I have an Intel 9400PT nic, the controller is 82572EI which was on your > supported list, but the PCI ID is not match, mine is 8086-107D, and your > list show 8086-10B9.And these two NIC is totally identical in hardware, just > different eeprom contents. > > My problem is I used "eeupdate" clear the PCI Vendor ID to 0000 by my > mistake. Now the PCI device id is 0000-107D. > > As the result BIOS & OS can't recognise it at all, even eeupdate itself ! > But some software (like AIDA64 ) can recognise it as a unknown device which > pci vendor id is 0000. > So I google that flashrom can help me ,(I have the original eep file.) I > download it and run it in DOS. I used command "flashrom -w 9400pt.eep -p > -nicintel_spi", then flashrom told me: >> >> Calibrating delay loop... OK. >> No EEPROM/flash device found. >> Note: flashrom can never write if the flash chip isn't found >> automatically. > > > So I need help how to using flashrom to program the eeprom on NIC. And can > flashrom use SMBUS address to flash?(I know the SMBUS address of this NIC.)
http://blog.vodkamelone.de/archives/146-Unbricking-an-Intel-Pro1000-e1000-network-interface.html > > > Thanks a lot. > yours sincerely > > > _______________________________________________ > flashrom mailing list > [email protected] > http://www.flashrom.org/mailman/listinfo/flashrom _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
