- Use ".V" (and "_V" in macros) for 3.3V Winbond 25Q chips. Rename the existing chips and add a .voltage entry where it was missing. - Use ".W" (and "_W" in macros) for 1.8V Winbond 25Q chips. - Add a feature flag for QPI-enabled chips: FEATURE_QPI. - Add W25Q20.W, W25Q40.W, W25Q80.W, W25Q16.W, W25Q32.W, W25Q64.W.
Signed-off-by: Stefan Tauner <[email protected]> --- flash.h | 1 + flashchips.c | 274 ++++++++++++++++++++++++++++++++++++++++++++++++++++++---- flashchips.h | 20 +++-- print.c | 26 +++--- 4 files changed, 287 insertions(+), 34 deletions(-) diff --git a/flash.h b/flash.h index a479286..b035330 100644 --- a/flash.h +++ b/flash.h @@ -99,6 +99,7 @@ enum write_granularity { #define FEATURE_WRSR_EWSR (1 << 6) #define FEATURE_WRSR_WREN (1 << 7) #define FEATURE_OTP (1 << 8) +#define FEATURE_QPI (1 << 9) #define FEATURE_WRSR_EITHER (FEATURE_WRSR_EWSR | FEATURE_WRSR_WREN) struct flashctx; diff --git a/flashchips.c b/flashchips.c index d4ab1be..0e0a1ff 100644 --- a/flashchips.c +++ b/flashchips.c @@ -9405,13 +9405,14 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q80", + .name = "W25Q80.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q80, + .model_id = WINBOND_NEX_W25Q80_V, .total_size = 1024, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -9444,13 +9445,14 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q16", + .name = "W25Q16.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q16, + .model_id = WINBOND_NEX_W25Q16_V, .total_size = 2048, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -9483,13 +9485,14 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q32", + .name = "W25Q32.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q32, + .model_id = WINBOND_NEX_W25Q32_V, .total_size = 4096, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -9522,13 +9525,14 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q64", + .name = "W25Q64.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q64, + .model_id = WINBOND_NEX_W25Q64_V, .total_size = 8192, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -9556,17 +9560,19 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, }, { .vendor = "Winbond", - .name = "W25Q128", + .name = "W25Q128.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q128, + .model_id = WINBOND_NEX_W25Q128_V, .total_size = 16384, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, @@ -9594,6 +9600,244 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25Q20.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q20_W, + .total_size = 256, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q40.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q40_W, + .total_size = 512, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q80.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q80_W, + .total_size = 1024, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q16.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q16_W, + .total_size = 2048, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q32.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q32_W, + .total_size = 4096, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q64.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q64_W, + .total_size = 8192, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { diff --git a/flashchips.h b/flashchips.h index 1a0696f..d705c32 100644 --- a/flashchips.h +++ b/flashchips.h @@ -649,12 +649,20 @@ #define WINBOND_NEX_W25X16 0x3015 #define WINBOND_NEX_W25X32 0x3016 #define WINBOND_NEX_W25X64 0x3017 -#define WINBOND_NEX_W25Q40 0x4013 -#define WINBOND_NEX_W25Q80 0x4014 -#define WINBOND_NEX_W25Q16 0x4015 -#define WINBOND_NEX_W25Q32 0x4016 -#define WINBOND_NEX_W25Q64 0x4017 -#define WINBOND_NEX_W25Q128 0x4018 +#define WINBOND_NEX_W25Q40_V 0x4013 /* W25Q40BV; W25Q40BL (2.3-3.6V) */ +#define WINBOND_NEX_W25Q80_V 0x4014 /* W25Q80BV */ +#define WINBOND_NEX_W25Q16_V 0x4015 /* W25Q16CV; W25Q16DV */ +#define WINBOND_NEX_W25Q32_V 0x4016 /* W25Q32BV; W25Q32FV in SPI mode (default) */ +#define WINBOND_NEX_W25Q64_V 0x4017 /* W25Q64BV, W25Q64CV; W25Q64FV in SPI mode (default) */ +#define WINBOND_NEX_W25Q128_V 0x4018 /* W25Q128BV; W25Q128FV in SPI mode (default) */ +#define WINBOND_NEX_W25Q256_V 0x4019 /* W25Q256FV */ +#define WINBOND_NEX_W25Q20_W 0x5012 /* W25Q20BW */ +#define WINBOND_NEX_W25Q40_W 0x5013 /* W25Q40BW */ +#define WINBOND_NEX_W25Q80_W 0x5014 /* W25Q80BW */ +#define WINBOND_NEX_W25Q16_W 0x6015 /* W25Q16DW */ +#define WINBOND_NEX_W25Q32_W 0x6016 /* W25Q32DW; W25Q32FV in QPI mode */ +#define WINBOND_NEX_W25Q64_W 0x6017 /* W25Q64DW; W25Q64FV in QPI mode */ +#define WINBOND_NEX_W25Q128_W 0x6018 /* (No W version known) W25Q128FV in QPI mode */ #define WINBOND_ID 0xDA /* Winbond */ #define WINBOND_W19B160BB 0x49 diff --git a/print.c b/print.c index ecde90f..7d2e5a0 100644 --- a/print.c +++ b/print.c @@ -544,7 +544,7 @@ const struct board_info boards_known[] = { B("ASRock", "G31M-S rev 2.0", OK, "http://www.asrock.com/mb/overview.asp?model=G31M-S";, NULL), B("ASRock", "ConRoeXFire-eSATA2", OK, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2";, NULL), B("ASRock", "H61M-ITX", BAD, "http://www.asrock.com/mb/overview.asp?Model=H61M-ITX";, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASRock", "H67M", BAD, "http://www.asrock.com/mb/overview.asp?Model=H67M";, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASRock", "H67M", BAD, "http://www.asrock.com/mb/overview.asp?Model=H67M";, "Probing works (Winbond W25Q64.V, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASRock", "K7S41", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41";, NULL), B("ASRock", "K7S41GX", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX";, NULL), B("ASRock", "K7VT4A+", BAD, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b";, "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html";), @@ -683,16 +683,16 @@ const struct board_info boards_known[] = { B("ASUS", "P6T Deluxe V2", OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/";, NULL), B("ASUS", "P7H57D-V EVO", OK, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/";, NULL), B("ASUS", "P7H55-M LX", BAD, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"), - B("ASUS", "P8B-E/4L", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8B WS", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8H61 PRO", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8H61-M LE/USB3", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8B-E/4L", BAD, NULL, "Probing works (Winbond W25Q64.V, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8B WS", BAD, NULL, "Probing works (Winbond W25Q32.V, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8H61 PRO", BAD, NULL, "Probing works (Winbond W25Q32.V, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8H61-M LE/USB3", BAD, NULL, "Probing works (Winbond W25Q32.V, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8H67-M PRO", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8P67 (rev. 3.1)", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8P67 LE", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8P67 LE", BAD, NULL, "Probing works (Winbond W25Q32.V, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8P67 PRO (rev. 3.0)", OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8P67_PRO/";, NULL), B("ASUS", "P8Z68-V", OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V/";, "Warning: MAC address of LOM is stored at 0x1000 - 0x1005 of the image."), - B("ASUS", "P8Z68-V PRO", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8Z68-V PRO", BAD, NULL, "Probing works (Winbond W25Q64.V, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8Z68-V PRO/GEN3", OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V_PROGEN3/";, "Warning: MAC address of LOM is stored at 0x1000 - 0x1005 of the image."), B("ASUS", "SABERTOOTH 990FX", OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/SABERTOOTH_990FX/";, NULL), B("ASUS", "SABERTOOTH 990FX R2.0", OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/SABERTOOTH_990FX_R20/";, NULL), @@ -895,8 +895,8 @@ const struct board_info boards_known[] = { B("MSI", "MS-7596 (785GM-E51)", OK, "http://www.msi.com/product/mb/785GM-E51.html";, NULL), B("MSI", "MS-7597 (GF615M-P33)", BAD, NULL, "Missing board enable/SIO support (Fintek F71889), see http://www.flashrom.org/pipermail/flashrom/2012-March/008956.html";), B("MSI", "MS-7599 (870-C45)", OK, "http://www.msi.com/product/mb/870-C45.html";, NULL), - B("MSI", "MS-7613 (Iona-GL8E)", BAD, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&dlc=en&product=4348478";, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("MSI", "MS-7635 (H55M-ED55)", BAD, "http://www.msi.com/product/mb/H55M-ED55.html";, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("MSI", "MS-7613 (Iona-GL8E)", BAD, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&dlc=en&product=4348478";, "Probing works (Winbond W25Q64.V, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("MSI", "MS-7635 (H55M-ED55)", BAD, "http://www.msi.com/product/mb/H55M-ED55.html";, "Probing works (Winbond W25Q64.V, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("MSI", "MS-7640 (890FXA-GD70)",OK, "http://www.msi.com/product/mb/890FXA-GD70.html";, NULL), B("MSI", "MS-7642 (890GXM-G65)", OK, "http://www.msi.com/product/mb/890GXM-G65.html";, NULL), B("MSI", "MS-7676 (H67MA-ED55(B3))", OK, "http://www.msi.com/product/mb/H67MA-ED55--B3-.html";, "Seems to work fine basically, but user reported (hopefully unrelated) buggy behavior of the board after a firmware upgrade. See http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html";), @@ -956,8 +956,8 @@ const struct board_info boards_known[] = { B("Supermicro", "X9DRT-HF+", BAD, NULL, "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked; SMM protection enabled."), B("Supermicro", "X9DRW", BAD, NULL, "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("Supermicro", "X9QRi-F+", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C600/X9QRi-F_.cfm";, "Probing works (Macronix MX25L12805, 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked; SMM protection enabled."), - B("Supermicro", "X9SCA-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm";, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("Supermicro", "X9SCL", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm";, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("Supermicro", "X9SCA-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm";, "Probing works (Winbond W25Q64.V, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("Supermicro", "X9SCL", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm";, "Probing works (Winbond W25Q64.V, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("T-Online", "S-100", OK, "http://wiki.freifunk-hannover.de/T-Online_S_100";, NULL), B("Tekram", "P6Pro-A5", OK, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm";, NULL), B("Termtek", "TK-3370 (Rev:2.5B)", OK, NULL, NULL), @@ -1010,8 +1010,8 @@ const struct board_info boards_known[] = { B("VIA", "VB700X", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=490";, NULL), B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", OK, NULL, NULL), B("ZOTAC", "GeForce 8200", OK, NULL, NULL), - B("ZOTAC", "H61-ITX WiFi (H61ITX-A-E)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ZOTAC", "H61-ITX WiFi (H61ITX-A-E)", BAD, NULL, "Probing works (Winbond W25Q32.V, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", BAD, NULL, "Probing works (Winbond W25Q32.V, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ZOTAC", "nForce 630i Supreme (N73U-Supreme)", OK, NULL, NULL), B("ZOTAC", "ZBOX AD02 (PLUS)", OK, NULL, NULL), B("ZOTAC", "ZBOX HD-ID11", OK, NULL, NULL), -- Kind regards, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
