I remembered DediProg Software have "Firmware AutoUpdate" in Help Menu.have you tried it ? Thanks! FredXwang > Date: Thu, 2 May 2013 15:57:39 +0200 > From: [email protected] > To: [email protected] > CC: [email protected] > Subject: [coreboot] Looking for dediprog users... > > hi, > > if you are using an sf100 with a firmware version between 2.1.1 and > 5.1.2 (non-inclusive), I would like to know from you if flashrom > version r1649 or newer works for you or not. Probing for a chip (even > if there is none attached) suffices as a test. Apparently earlier > versions do not support setting the spi clock rate, but we always do > that (since r1649) and fail programmer initialization on those versions. > I try to find out which versions support setting the speed. > > BTW did anybody try to contact dediprog and request any information > that would help flashrom to support their programmers better? > > I would also like to know if any dediprog sf300 or sf600 users are > reading this and would like to see support for it in flashrom. > -- > Kind regards/Mit freundlichen Grüßen, Stefan Tauner > > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot
_______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
