Am 10.07.2013 21:17 schrieb Stefan Tauner: > With every newly supported programmer the information regarding reboots > on failures becomes more ridiculous. With this patch it is only shown when > the internal programmer module was selected. > > Example outputs for external programmers: > 1) non-fatal: > […] > Reading current flash chip contents... done. FAILED at 0x00000000! > Expected=0xff, Found=0x28, failed byte count from 0x00000000-0x0001ffff: > 0x1fde7 > ERASE FAILED! > FAILED! > Uh oh. Erase/write failed. Checking if anything changed. > Good. It seems nothing was changed. > Writing to the flash chip apparently didn't do anything. > Please check the connections (especially those to write protection pins) > between > the programmer and the flash chip. If you think the error is caused by > flashrom > please report this on IRC at chat.freenode.net (channel #flashrom) or > mail [email protected], thanks! > > 2) fatal: > […] > Verifying flash... FAILED at 0x00000000! Expected=0x0f, Found=0xff, failed > byte count from 0x00000000-0x0001ffff: 0x1fde6 > Your flash chip is in an unknown state. > Please report this on IRC at chat.freenode.net (channel #flashrom) or > mail [email protected], thanks! > > Signed-off-by: Stefan Tauner <[email protected]> > Acked-by: David Hendricks <[email protected]>
Acked-by: Carl-Daniel Hailfinger <[email protected]> Regards, Carl-Daniel -- http://www.hailfinger.org/ _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
