Author: stefanct Date: Wed Oct 2 03:22:02 2013 New Revision: 1755 URL: http://flashrom.org/trac/flashrom/changeset/1755
Log: rayer_spi: Add pinout for Atmel STK200/300. Signed-off-by: Maksim Kuleshov <[email protected]> Signed-off-by: Kyösti Mälkki <[email protected]> Acked-by: Kyösti Mälkki <[email protected]> Modified: trunk/flashrom.8.tmpl trunk/rayer_spi.c Modified: trunk/flashrom.8.tmpl ============================================================================== --- trunk/flashrom.8.tmpl Wed Oct 2 03:21:57 2013 (r1754) +++ trunk/flashrom.8.tmpl Wed Oct 2 03:22:02 2013 (r1755) @@ -759,8 +759,8 @@ syntax where .B model can be -.BR rayer " for the RayeR cable, " byteblastermv " for the Altera ByteBlasterMV, or " xilinx \ -" for the Xilinx Parallel Cable III (DLC 5)." +.BR rayer " for the RayeR cable, " byteblastermv " for the Altera ByteBlasterMV, " stk200 " for the Atmel \ +STK200/300, or " xilinx " for the Xilinx Parallel Cable III (DLC 5)." .sp More information about the RayeR hardware is available at .nh Modified: trunk/rayer_spi.c ============================================================================== --- trunk/rayer_spi.c Wed Oct 2 03:21:57 2013 (r1754) +++ trunk/rayer_spi.c Wed Oct 2 03:22:02 2013 (r1755) @@ -82,10 +82,23 @@ .shutdown = byteblaster_shutdown, }; +static void stk200_preinit(const void *); +static int stk200_shutdown(void *); + +static const struct rayer_pinout atmel_stk200 = { + .cs_bit = 7, + .sck_bit = 4, + .mosi_bit = 5, + .miso_bit = 6, + .preinit = stk200_preinit, + .shutdown = stk200_shutdown, +}; + static const struct rayer_programmer rayer_spi_types[] = { {"rayer", NT, "RayeR SPIPGM", &rayer_spipgm}, {"xilinx", NT, "Xilinx Parallel Cable III (DLC 5)", &xilinx_dlc5}, {"byteblastermv", OK, "Altera ByteBlasterMV", &altera_byteblastermv}, + {"stk200", NT, "Atmel STK200/300 adapter", &atmel_stk200}, {0}, }; @@ -221,6 +234,21 @@ return 0; } +static void stk200_preinit(const void *data) { + msg_pdbg("stk200_init\n"); + /* Assert #EN signals, set LED signal. */ + lpt_outbyte = (1 << 6) ; + OUTB(lpt_outbyte, lpt_iobase); +} + +static int stk200_shutdown(void *data) { + msg_pdbg("stk200_shutdown\n"); + /* Assert #EN signals, clear LED signal. */ + lpt_outbyte = (1 << 2) | (1 << 3); + OUTB(lpt_outbyte, lpt_iobase); + return 0; +} + #else #error PCI port I/O access is not supported on this architecture yet. #endif _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
