Not sure if it's FCC ID: FAB 02-0172-004 Rev A on the back side. On front side: 3c905B-TX Fast Etherlink XL PCI
03-0172-410 D EA=0050044B4FB9 SN=6TQ24B4FB9 2013/10/23 san <[email protected]> > W29EE011 does work with no problems. > > > 2013/10/23 san <[email protected]> > >> I have unsupported one, so i won't use it. >> >> PM29F002T is too big (256kB over 128kB). >> It does work at last for read. >> >> When erase it does work about 1/3 times. >> Once i suceed to write (after erase), and whole chip was programmed well! >> >> There is something wrong with erase function in nic3com, as i belive... >> >> Later i'll try to use W29EE011 (128kB). >> >> Regards! >> >> >> 2013/10/22 san <[email protected]> >> >>> Hi! >>> >>> I own: >>> 02:00.0 Ethernet controller [0200]: 3Com Corporation 3c905 100BaseTX >>> [Boomerang] [10b7:9050] >>> >>> It's unsupported: >>> ---[code]--- >>> Error: No supported PCI device found. >>> Error: Programmer initialization failed. >>> ---[/code]--- >>> >>> I would love to help You to get it to work with flashrom. >>> Do You need it? >>> >>> Regards! >>> >>> -- >>> [ e-San.info | [email protected] ] >>> >> >> >> >> -- >> [ e-San.info | [email protected] ] >> > > > > -- > [ e-San.info | [email protected] ] > -- [ e-San.info | [email protected] ]
_______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
