Hi Idwer, The flash is on Macbook motherboard and I am using Pomona test clip (next time I think I would buy 3M clip), the same that ISP page on this site shows. The cable length is about 8 inches, so I think it should be pretty safe. I haven't tried to powered on the laptop in order to read the flash. I keep the battery removed. I could desolder the flash but I want to avoid it. Thanks! > Date: Tue, 4 Feb 2014 02:10:59 +0100 > From: [email protected] > To: [email protected] > Subject: Re: [flashrom] Issues recognizing Macronics 25L3205D using > UM232H-B-WE > > 2014-02-03 Jay Khan <[email protected]>: > > Thanks Idwer for your quick response. > > > > I changed the HOLD and WP to VCC still no luck; I am attaching the output > > with -V option; but it now does seem to detect the ID1 and ID2: > > > > Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: > > id1 0x7f7f, id2 0x7f > > This is where you have to tell us where the chip is connected to, or > if it is desoldered :) > The wiki page http://flashrom.org/ISP describes "the procedure of > writing a flash chip while it is (already/still) attached to the > circuit it is to be used with". > > > > > Still gives the error as before: > > > > > > Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on > > ft2232_spi. > > Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0x7f, > > id2 0x7f > > Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI). > > === > > From the attached log file: > ....
_______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
