On Tue, 22 Apr 2014 20:54:04 +0530 Rajasekhar Pulluru <[email protected]> wrote:
> Hi Stefan, > > Thanks for the response. I have tried adding support for Rangeley following > the spec. Attached the patch. But, flashrom -E is failing with below error > messages > > Pasting only the failure messages: > .. > ... > Erasing and writing flash chip... spi_block_erase_20 failed during command > execution at address 0x0 > Reading current flash chip contents... done. FAILED at 0x00010000! > Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x0003ffff: > 0x30000 > ERASE FAILED! > Reading current flash chip contents... done. spi_chip_erase_60 failed > during command execution > Reading current flash chip contents... done. spi_chip_erase_c7 failed > during command execution > FAILED! > Your flash chip is in an unknown state. > Get help on IRC at chat.freenode.net (channel #flashrom) or > mail [email protected] with the subject "FAILED: <your board name>"! > ------------------------------------------------------------------------------- > DO NOT REBOOT OR POWEROFF! Thank you for the patch. The errors alone do not really help, please post the full (verbose) log (you can redact DMI information if you want). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
