Hi. Yes, I was able to flash that this chip on arduino. I was hesitant to change value of .tested field because my setup was somewhat 'wacky' - long wires and stuff, and flashing was not very stable. But this instability was probably due to my setup, not because of code/arduino/chip, so I guess you can change it to TEST_OK_PREW.
Thanks. Nikolay. 2014-05-03 9:00 GMT-04:00 Stefan Tauner <[email protected]>: > On Sun, 9 Mar 2014 22:20:23 -0400 > Nikolay Martynov <[email protected]> wrote: > >> * Updated according to manufacturers datasheet >> (to the best of my abilities to read it) >> * Tested with actual S25FL164K via arduino spi >> >> Signed-off-by: Nikolay Martynov <[email protected]> > > Hello Nikolay, > > thank you very much for the patch; it looks very good on a first > glance. I need to verify it with the datasheet but I have a small > nitpick/question before that: You wrote that you have tested the patch > with the S25FL164K but the .tested field of the respective chip does > not reflect that. May I assume that the .tested field of the S25FL164K > should be set to TEST_OK_PREW? > > -- > Kind regards/Mit freundlichen Grüßen, Stefan Tauner -- Martynov Nikolay. Email: [email protected] _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
