On Sat, 10 Aug 2013 03:45:51 +0200 Stefan Tauner <[email protected]> wrote:
> I completely rewrote it *again* :) > Apparently the SPI 100 controller in Yangtze is quite different to the > existing interface. I spend quite some time on figuring out why the > FIFO ring buffer does not seem to work: my diagnose is that it is not > a ring buffer at all. I have no idea why they call it FIFO either... > we have full indexed access to it. Whatever... these patches should > work fine on Kabini (tested on the A180-H). > Tests on any other board especially older generations are very welcomed! > > Stefan Tauner (6): > sbxxx: Add detection for the remaining AMD chipset families. > sbxxx: Set SPI clock to 16.5 MHz and disable fast reads. > sbxxx: Cleanup. > sbxxx: Add support for new AMD SPI controller. > sbxxx: Add spispeed parameter. > debug > > flashrom.8 | 21 +++ > programmer.h | 1 + > sb600spi.c | 538 > ++++++++++++++++++++++++++++++++++++++++++++--------------- > 3 files changed, 424 insertions(+), 136 deletions(-) > I think it's time to commit the remaining patches from this set, namely the cleanup (r1793), the SPI100/Yangtze support (r1794) and the spispeed parameter (r1795). They have been tested on my A180-H as well as PCEngine's APU board. Thanks to everyone involved in figuring this out and testing the various variations of the patches. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
