Author: stefanct Date: Wed Jun 4 18:17:03 2014 New Revision: 1818 URL: http://flashrom.org/trac/flashrom/changeset/1818
Log: Add support for Sanyo LE25FW106. Also, add spi_disable_blockprotect_bp1_srwd(). Originally written and tested by The Raven <[email protected]>. Signed-off-by: Stefan Tauner <[email protected]> Acked-by: Stefan Tauner <[email protected]> Modified: trunk/chipdrivers.h trunk/flashchips.c trunk/flashchips.h trunk/spi25_statusreg.c Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Mon Jun 2 02:46:02 2014 (r1817) +++ trunk/chipdrivers.h Wed Jun 4 18:17:03 2014 (r1818) @@ -73,6 +73,7 @@ int spi_prettyprint_status_register_bp4_srwd(struct flashctx *flash); int spi_prettyprint_status_register_bp2_bpl(struct flashctx *flash); int spi_disable_blockprotect(struct flashctx *flash); +int spi_disable_blockprotect_bp1_srwd(struct flashctx *flash); int spi_disable_blockprotect_bp2_srwd(struct flashctx *flash); int spi_disable_blockprotect_bp3_srwd(struct flashctx *flash); int spi_disable_blockprotect_bp4_srwd(struct flashctx *flash); Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Mon Jun 2 02:46:02 2014 (r1817) +++ trunk/flashchips.c Wed Jun 4 18:17:03 2014 (r1818) @@ -9153,6 +9153,37 @@ { .vendor = "Sanyo", + .name = "LE25FW106", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW106, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {2 * 1024, 64} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, /* FIXME: Add ERSER error flag. */ + .unlock = spi_disable_blockprotect_bp1_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", .name = "LE25FW406A", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Mon Jun 2 02:46:02 2014 (r1817) +++ trunk/flashchips.h Wed Jun 4 18:17:03 2014 (r1818) @@ -537,6 +537,7 @@ #define SANYO_ID 0x62 /* Sanyo */ #define SANYO_LE25FW203A 0x1600 #define SANYO_LE25FW403A 0x1100 +#define SANYO_LE25FW106 0x15 #define SANYO_LE25FW406 0x07 /* RES2 */ #define SANYO_LE25FW418A 0x10 /* RES2 and some weird 1 byte RDID variant */ #define SANYO_LE25FW406A 0x1A /* RES2, no datasheet */ Modified: trunk/spi25_statusreg.c ============================================================================== --- trunk/spi25_statusreg.c Mon Jun 2 02:46:02 2014 (r1817) +++ trunk/spi25_statusreg.c Wed Jun 4 18:17:03 2014 (r1818) @@ -196,6 +196,13 @@ return spi_disable_blockprotect_generic(flash, 0x3C, 0, 0, 0xFF); } +/* A common block protection disable that tries to unset the status register bits masked by 0x0C (BP0-1) and + * protected/locked by bit #7. Useful when bits 4-5 may be non-0). */ +int spi_disable_blockprotect_bp1_srwd(struct flashctx *flash) +{ + return spi_disable_blockprotect_generic(flash, 0x0C, 1 << 7, 0, 0xFF); +} + /* A common block protection disable that tries to unset the status register bits masked by 0x1C (BP0-2) and * protected/locked by bit #7. Useful when bit #5 is neither a protection bit nor reserved (and hence possibly * non-0). */ _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
