Ok, so the Macronix must be for the independent BMC. There are a couple of Atmel devices but no Winbond that I can find.
On Sun, Aug 3, 2014 at 10:43 AM, Stefan Tauner <[email protected]> wrote: > On Sun, 3 Aug 2014 09:52:48 -0400 > TR Reardon <[email protected]> wrote: > >> Because I took a picture of the chip ;) > > That is a 256Mb/32MB chip. It is unlikely that this is the chip the > board boots from: > > The Flash Descriptor read by flashrom from the boot flash contains a map > of the flash addresses used (something like a partition table). It is > designed to work with an 8MB chip (top of BIOS region is top of flash > and 0x007fffff in this case, equalling 8MB): > 0x54: 0x000f0000 FREG0: Flash Descriptor region (0x00000000-0x0000ffff) is > read-write. > 0x58: 0x07ff0200 FREG1: BIOS region (0x00200000-0x007fffff) is read-write. > 0x5C: 0x00000fff FREG2: Management Engine region is unused. > 0x60: 0x00000fff FREG3: Gigabit Ethernet region is unused. > 0x64: 0x00000fff FREG4: Platform Data region is unused. > > Also, the Component Section contains the density of the boot flash: > === Component Section === > FLCOMP 0x09300024 > FLILL 0x00000000 > > --- Details --- > Component 1 density: 8 MB _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
