This is the output I get after compiling and trying to run flashrom.exe with the programmer connected:
flashrom v0.9.7-r1711 on Windows 6.1 (x86) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Unable to open FTDI device: -6 (ftdi_usb_reset failed). Error: Programmer initialization failed. This is what I get when the programmer is disconnected: $ flashrom.exe -p ft2232_spi:type=232H flashrom v0.9.7-r1711 on Windows 6.1 (x86) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Unable to open FTDI device: -3 (device not found). Error: Programmer initialization failed. Thank you, Ohad Benjamin, Sr. Embedded SW Engineer Office: +972-9-7667600 ext 122 | Fax: +972-9-7667610 [email protected] | www.panpwr.com -----Original Message----- From: Stefan Tauner [mailto:[email protected]] Sent: 20 December, 2014 17:02 To: Ohad Benjamin Cc: [email protected] Subject: Re: [flashrom] Flashrom with FTDI support On Thu, 18 Dec 2014 15:10:13 +0000 Ohad Benjamin <[email protected]> wrote: > I tried compiling my own version from source, but the output could not > communicate with the FTDI port. Hello Ohad, I'd focus on that part because from that description alone I suppose another binary would have the same problems. Please describe your symptoms and post a verbose flashrom log. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
