Author: stefanct
Date: Sun Feb 8 22:57:52 2015
New Revision: 1879
URL: http://flashrom.org/trac/flashrom/changeset/1879
Log:
Add a bunch of new/tested stuff and various small changes 22.
Tested mainboards:
OK:
- AOpen UK79G-1394 (used in EZ18 barebones)
Reported by Lawrence Gough
- ASUS M4N78 SE
Reported by Dima Veselov
- ASUS P5LD2-VM
Mark board enable as tested (reported by Dima Veselov)
- GIGABYTE GA-970A-UD3P (rev. 2.0)
Reported by trucmar on IRC
- GIGABYTE GA-990FXA-UD3 (rev. 4.0)
Reported by ROKO__ on IRC
- GIGABYTE GA-H77-DS3H (rev. 1.1)
Reported by Evgeniy Edigarev
- GIGABYTE GA-P55-USB3 (rev. 2.0)
Reported by Måns Thörnqvist
- MSI MS-7817 (H81M-E33)
Reported by Igor Kolker
Chipsets:
- Marked Intel Bay Trail (0x0f1c) as tested OK
Reported by Antonio Ospite
- Refine Intel IDs
* Add IDs for Braswell
* Add IDs for 9 Series PCHs (e.g. H97, Z97)
* Rename Wellsburg devices slightly
Flash chips:
- Atmel AT25DF041A to PREW (+PREW)
Reported by Tai-hwa Liang
- Atmel AT26DF161 to PREW (+EW)
Reported by Steve Shenton
- Atmel AT45DB011D to PREW (+PREW)
Reported by The Raven
- Atmel AT45DB642D to PREW (+PREW)
Reported by Mahesh Mokal
- Eon EN25F32 to PREW (+PREW)
Reported by Arman Khodabande
- Eon EN25F40 to PREW (+REW)
Reported by Jerrad Pierce
- Eon EN25QH16 to PREW (+EW)
Reported by Ben Johnson
- GigaDevice GD25Q20(B) to PREW (+PREW)
Reported by Gilles Aurejac
- Macronix MX25U6435E/F to PR (+PR)
Reported by Matt Taggart
- PMC Pm25LV512(A) to PREW (+PREW)
Reported by The Raven
- SST SST39VF020 to PREW (+PREW)
Reported by Urja Rannikko
- Winbond W25Q40.V to PREW (+EW)
Reported by Torben Nielsen
- Add E variants of MX25Lx006 (MX25L2006E, MX25L4006E, MX25L8006E).
- Add MX25L6465E variant.
- There was never a MX25L12805 AFAICT.
- Split MX25L12805 from models with the same ID but an additional 32 kB
eraser: MX25L12835F/MX25L12845E/MX25L12865E.
- Add a bunch of ST parallel NOR flash chip IDs.
Miscellaneous:
- Whitelist ThinkPad X200.
- Constify master parameter of register_master().
- Remove FEATURE_BYTEWRITES because it was never used at all.
- Refine hwseq messages and make them less prominent.
- Fix the yet unused PRIxCHIPADDR format string thingy.
- Fix copy&paste error in spi_prettyprint_status_register_bp().
Spotted by Pablo Cases.
- Add an additional SMBus controller revision to identify another Yangtze
model. Thanks to Dan Christensen for reporting this issue.
- dediprog: add missing include for stdlib.h.
This fixes (at least) building on FreeBSD and DragonflyBSD with gcc.
- Remove references to struct pci_filter from programmer.h.
It is only needed in internal.c where it has a complete type. Having
it in programmer.h provokes a warning by some old versions of gcc.
- Tiny other stuff.
Signed-off-by: Stefan Tauner <[email protected]>
Acked-by: Stefan Tauner <[email protected]>
Modified:
trunk/Makefile
trunk/board_enable.c
trunk/chipset_enable.c
trunk/dediprog.c
trunk/flash.h
trunk/flashchips.c
trunk/flashchips.h
trunk/flashrom.8.tmpl
trunk/flashrom.c
trunk/ichspi.c
trunk/nicintel_eeprom.c
trunk/print.c
trunk/programmer.c
trunk/programmer.h
trunk/sb600spi.c
trunk/spi25_statusreg.c
Modified: trunk/Makefile
==============================================================================
--- trunk/Makefile Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/Makefile Sun Feb 8 22:57:52 2015 (r1879)
@@ -138,7 +138,7 @@
else
override CONFIG_PONY_SPI = no
endif
-# Dediprog and FT2232 are not supported under DOS (missing USB support).
+# Dediprog, USB-Blaster and FT2232 are not supported under DOS (missing USB
support).
ifeq ($(CONFIG_DEDIPROG), yes)
UNSUPPORTED_FEATURES += CONFIG_DEDIPROG=yes
else
@@ -277,7 +277,7 @@
else
override CONFIG_PONY_SPI = no
endif
-# Dediprog and FT2232 are not supported with libpayload (missing libusb
support)
+# Dediprog, USB-Blaster and FT2232 are not supported with libpayload (missing
libusb support)
ifeq ($(CONFIG_DEDIPROG), yes)
UNSUPPORTED_FEATURES += CONFIG_DEDIPROG=yes
else
@@ -914,6 +914,7 @@
endif
define FTDI_TEST
+#include <stdlib.h>
#include <ftdi.h>
struct ftdi_context *ftdic = NULL;
int main(int argc, char **argv)
Modified: trunk/board_enable.c
==============================================================================
--- trunk/board_enable.c Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/board_enable.c Sun Feb 8 22:57:52 2015 (r1879)
@@ -2377,7 +2377,7 @@
{0x8086, 0x27b8, 0x1043, 0x2a22, 0x8086, 0x2770, 0x1043, 0x2a22,
"^P5LP-LE$", NULL, NULL, P3, "ASUS", "P5LP-LE (Epson OEM)",
0, OK, intel_ich_gpio34_raise},
{0x8086, 0x27da, 0x1043, 0x8179, 0x8086, 0x27b8, 0x1043, 0x8179,
"^P5LD2$", NULL, NULL, P3, "ASUS", "P5LD2",
0, OK, intel_ich_gpio16_raise},
{0x8086, 0x27da, 0x1043, 0x8179, 0x8086, 0x27b0, 0x1043, 0x8179,
"^P5LD2-MQ$", NULL, NULL, P3, "ASUS", "P5LD2-MQ",
0, OK, intel_ich_gpio16_raise},
- {0x8086, 0x27da, 0x1043, 0x8179, 0x8086, 0x27b8, 0x1043, 0x8179,
"^P5LD2-VM$", NULL, NULL, P3, "ASUS", "P5LD2-VM",
0, NT, intel_ich_gpio16_raise},
+ {0x8086, 0x27da, 0x1043, 0x8179, 0x8086, 0x27b8, 0x1043, 0x8179,
"^P5LD2-VM$", NULL, NULL, P3, "ASUS", "P5LD2-VM",
0, OK, intel_ich_gpio16_raise},
{0x8086, 0x27b0, 0x1043, 0x8179, 0x8086, 0x2770, 0x1043, 0x817a,
"^P5LD2-VM DH$", NULL, NULL, P3, "ASUS", "P5LD2-VM DH",
0, OK, intel_ich_gpio16_raise},
{0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL,
NULL, NULL, P3, "ASUS", "P5ND2-SLI Deluxe", 0,
OK, nvidia_mcp_gpio10_raise},
{0x10DE, 0x0260, 0x1043, 0x81BC, 0x10DE, 0x026C, 0x1043, 0x829E,
"^P5N-D$", NULL, NULL, P3, "ASUS", "P5N-D",
0, OK, it8718f_gpio63_raise},
@@ -2427,6 +2427,7 @@
{0x8086, 0x1E22, 0x17AA, 0x21F6, 0x8086, 0x1E55, 0x17AA, 0x21F6,
"^ThinkPad T530", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad T530",
0, OK, p2_whitelist_laptop},
{0x8086, 0x27a0, 0x17aa, 0x2015, 0x8086, 0x27b9, 0x17aa, 0x2009,
"^ThinkPad T60", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad T60",
0, OK, p2_whitelist_laptop},
{0x8086, 0x27a0, 0x17aa, 0x2017, 0x8086, 0x27b9, 0x17aa, 0x2009,
"^ThinkPad T60", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad T60(s)",
0, OK, p2_whitelist_laptop},
+ {0x8086, 0x2917, 0x17AA, 0x20F5, 0x8086, 0x2930, 0x17AA, 0x20F9,
"^ThinkPad X200$", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad X200",
0, OK, p2_whitelist_laptop},
{0x8086, 0x3B07, 0x17AA, 0x2166, 0x8086, 0x3B30, 0x17AA, 0x2167,
"^Lenovo X201", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad X201",
0, OK, p2_whitelist_laptop},
{0x8086, 0x1E22, 0x17AA, 0x21FA, 0x8086, 0x1E55, 0x17AA, 0x21FA,
"^ThinkPad X230", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad X230",
0, OK, p2_whitelist_laptop},
{0x8086, 0x27A0, 0x17AA, 0x2017, 0x8086, 0x27B9, 0x17AA, 0x2009,
"^ThinkPad X60", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad X60(s)",
0, OK, p2_whitelist_laptop},
Modified: trunk/chipset_enable.c
==============================================================================
--- trunk/chipset_enable.c Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/chipset_enable.c Sun Feb 8 22:57:52 2015 (r1879)
@@ -451,7 +451,7 @@
fwh_idsel_old = mmio_readl(ilb + fwh_sel1);
rmmio_writel(fwh_idsel, ilb + fwh_sel1);
} else {
- fwh_idsel_old = pci_read_long(dev, fwh_sel1) << 16;
+ fwh_idsel_old = (uint64_t)pci_read_long(dev, fwh_sel1)
<< 16;
rpci_write_long(dev, fwh_sel1, (fwh_idsel >> 16) &
0xffffffff);
if (fwh_sel2 > 0) {
fwh_idsel_old |= pci_read_word(dev, fwh_sel2);
@@ -1593,7 +1593,7 @@
{0x1166, 0x0205, OK, "Broadcom", "HT-1000",
enable_flash_ht1000},
{0x17f3, 0x6030, OK, "RDC", "R8610/R3210",
enable_flash_rdc_r8610},
{0x8086, 0x0c60, NT, "Intel", "S12x0",
enable_flash_s12x0},
- {0x8086, 0x0f1c, NT, "Intel", "Bay Trail",
enable_flash_silvermont},
+ {0x8086, 0x0f1c, OK, "Intel", "Bay Trail",
enable_flash_silvermont},
{0x8086, 0x0f1d, NT, "Intel", "Bay Trail",
enable_flash_silvermont},
{0x8086, 0x0f1e, NT, "Intel", "Bay Trail",
enable_flash_silvermont},
{0x8086, 0x0f1f, NT, "Intel", "Bay Trail",
enable_flash_silvermont},
@@ -1635,6 +1635,7 @@
{0x8086, 0x1f39, NT, "Intel", "Avoton/Rangeley",
enable_flash_silvermont},
{0x8086, 0x1f3a, NT, "Intel", "Avoton/Rangeley",
enable_flash_silvermont},
{0x8086, 0x1f3b, NT, "Intel", "Avoton/Rangeley",
enable_flash_silvermont},
+ {0x8086, 0x229c, NT, "Intel", "Braswell",
enable_flash_silvermont},
{0x8086, 0x2310, NT, "Intel", "DH89xxCC (Cave Creek)",
enable_flash_pch7},
{0x8086, 0x2390, NT, "Intel", "Coleto Creek",
enable_flash_pch7},
{0x8086, 0x2410, OK, "Intel", "ICH",
enable_flash_ich0},
@@ -1730,42 +1731,47 @@
{0x8086, 0x8c5d, NT, "Intel", "Lynx Point",
enable_flash_pch8},
{0x8086, 0x8c5e, NT, "Intel", "Lynx Point",
enable_flash_pch8},
{0x8086, 0x8c5f, NT, "Intel", "Lynx Point",
enable_flash_pch8},
+ {0x8086, 0x8cc1, NT, "Intel", "9 Series",
enable_flash_pch9},
+ {0x8086, 0x8cc2, NT, "Intel", "9 Series Engineering Sample",
enable_flash_pch9},
+ {0x8086, 0x8cc3, NT, "Intel", "9 Series",
enable_flash_pch9},
+ {0x8086, 0x8cc4, NT, "Intel", "Z97",
enable_flash_pch9},
+ {0x8086, 0x8cc6, NT, "Intel", "H97",
enable_flash_pch9},
+ {0x8086, 0x8d40, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d41, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d42, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d43, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d44, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d45, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d46, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d47, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d48, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d49, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d4a, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d4b, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d4c, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d4d, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d4e, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d4f, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d50, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d51, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d52, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d53, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d54, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d55, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d56, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d57, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d58, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d59, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d5a, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d5b, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d5c, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d5d, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d5e, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
+ {0x8086, 0x8d5f, NT, "Intel", "C610/X99 (Wellsburg)",
enable_flash_pch8_wb},
{0x8086, 0x9c41, NT, "Intel", "Lynx Point LP Eng. Sample",
enable_flash_pch8_lp},
{0x8086, 0x9c43, NT, "Intel", "Lynx Point LP Premium",
enable_flash_pch8_lp},
{0x8086, 0x9c45, NT, "Intel", "Lynx Point LP Mainstream",
enable_flash_pch8_lp},
{0x8086, 0x9c47, NT, "Intel", "Lynx Point LP Value",
enable_flash_pch8_lp},
- {0x8086, 0x8d40, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d41, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d42, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d43, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d44, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d45, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d46, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d47, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d48, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d49, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d4a, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d4b, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d4c, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d4d, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d4e, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d4f, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d50, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d51, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d52, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d53, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d54, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d55, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d56, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d57, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d58, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d59, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d5a, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d5b, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d5c, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d5d, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d5e, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
- {0x8086, 0x8d5f, NT, "Intel", "Wellsburg",
enable_flash_pch8_wb},
{0x8086, 0x9cc1, NT, "Intel", "Haswell U Sample",
enable_flash_pch9},
{0x8086, 0x9cc2, NT, "Intel", "Broadwell U Sample",
enable_flash_pch9},
{0x8086, 0x9cc3, NT, "Intel", "Broadwell U Premium",
enable_flash_pch9},
@@ -1807,10 +1813,10 @@
msg_pdbg(" with PCI ID %04x:%04x",
chipset_enables[i].vendor_id,
chipset_enables[i].device_id);
- msg_pinfo(". ");
+ msg_pinfo(".\n");
if (chipset_enables[i].status == NT) {
- msg_pinfo("\nThis chipset is marked as untested. If "
+ msg_pinfo("This chipset is marked as untested. If "
"you are using an up-to-date version\nof "
"flashrom *and* were (not) able to "
"successfully update your firmware with it,\n"
Modified: trunk/dediprog.c
==============================================================================
--- trunk/dediprog.c Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/dediprog.c Sun Feb 8 22:57:52 2015 (r1879)
@@ -19,6 +19,7 @@
#include "platform.h"
+#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <limits.h>
Modified: trunk/flash.h
==============================================================================
--- trunk/flash.h Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/flash.h Sun Feb 8 22:57:52 2015 (r1879)
@@ -107,7 +107,6 @@
/* Feature bits used for non-SPI only */
#define FEATURE_REGISTERMAP (1 << 0)
-#define FEATURE_BYTEWRITES (1 << 1)
#define FEATURE_LONG_RESET (0 << 4)
#define FEATURE_SHORT_RESET (1 << 4)
#define FEATURE_EITHER_RESET FEATURE_LONG_RESET
Modified: trunk/flashchips.c
==============================================================================
--- trunk/flashchips.c Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/flashchips.c Sun Feb 8 22:57:52 2015 (r1879)
@@ -1276,7 +1276,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
bit6 is quad enhance (sic!) */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
@@ -1449,7 +1449,7 @@
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -2173,7 +2173,7 @@
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_OK_PR,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -2435,7 +2435,7 @@
/* does not support EWSR nor WREN and has no writable status
register bits whatsoever */
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_OTP,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_at45db,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -2772,7 +2772,7 @@
/* does not support EWSR nor WREN and has no writable status
register bits whatsoever */
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_OTP,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_at45db,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -4220,7 +4220,7 @@
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_OK_PROBE,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -4325,7 +4325,7 @@
.total_size = 4096,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -4619,7 +4619,7 @@
/* OTP: 512B total; enter 0x3A */
/* QPI enable 0x38, disable 0xFF */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
- .tested = TEST_OK_PR,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -5583,7 +5583,7 @@
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -6727,7 +6727,7 @@
{
.vendor = "Macronix",
- .name = "MX25L2005(C)",
+ .name = "MX25L2005(C)/MX25L2006E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L2005,
@@ -6765,7 +6765,7 @@
{
.vendor = "Macronix",
- .name = "MX25L4005(A/C)",
+ .name = "MX25L4005(A/C)/MX25L4006E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L4005,
@@ -6803,7 +6803,7 @@
{
.vendor = "Macronix",
- .name = "MX25L8005/MX25V8005",
+ .name = "MX25L8005/MX25L8006E/MX25V8005",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L8005,
@@ -6907,7 +6907,7 @@
},
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
MX25L1605A bp2 only */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported
*/
.voltage = {2700, 3600},
@@ -6942,7 +6942,7 @@
},
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
bit6: Continuously Program (CP) mode */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O
supported */
.voltage = {2700, 3600},
@@ -6978,7 +6978,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
bit6 is quad enable */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi
I/O supported */
.voltage = {2700, 3600},
@@ -7014,7 +7014,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
bit6 is quad enable */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi
I/O supported */
.voltage = {2700, 3600},
@@ -7085,7 +7085,7 @@
},
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
bit6: CP mode */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and dual
I/O supported */
.voltage = {2700, 3600},
@@ -7124,7 +7124,7 @@
},
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and dual
I/O supported */
.voltage = {2700, 3600},
@@ -7163,7 +7163,7 @@
},
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and dual
I/O supported */
.voltage = {2700, 3600},
@@ -7199,7 +7199,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
bit6 is quad enable */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
@@ -7235,7 +7235,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
bit6 has different meanings */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
@@ -7271,7 +7271,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
bit6 for 36E is quad enable */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
@@ -7279,7 +7279,7 @@
{
.vendor = "Macronix",
- .name = "MX25L6445E/MX25L6473E",
+ .name = "MX25L6445E/MX25L6465E/MX25L6473E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L6405,
@@ -7311,7 +7311,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
bit6 is quad enable */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi
I/O supported */
.voltage = {2700, 3600},
@@ -7319,13 +7319,13 @@
{
.vendor = "Macronix",
- .name = "MX25L12805(D)",
+ .name = "MX25L12805D",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
- .model_id = MACRONIX_MX25L12805,
+ .model_id = MACRONIX_MX25L12805D,
.total_size = 16384,
.page_size = 256,
- /* MX25L12805D has 64B of OTP; enter 0xB1, exit 0xC1 */
+ /* OTP: 64B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
@@ -7347,9 +7347,49 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B) supported
*/
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Macronix",
+ .name = "MX25L12835F/MX25L12845E/MX25L12865E",
+ .bustype = BUS_SPI,
+ .manufacture_id = MACRONIX_ID,
+ .model_id = MACRONIX_MX25L12805D,
+ .total_size = 16384,
+ .page_size = 256,
+ /* OTP: 512B total; enter 0xB1, exit 0xC1 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 4096} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 512} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 256} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {16 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {16 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ /* TODO: security register and SBLK/SBULK; MX25L12835F:
configuration register */
+ .printlock = spi_prettyprint_status_register_bp3_srwd, /*
bit6 is quad enable */
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
- .read = spi_chip_read, /* MX25L12805D: Fast read
(0x0B) supported */
+ .read = spi_chip_read, /* Fast read (0x0B) supported
*/
.voltage = {2700, 3600},
},
@@ -7364,7 +7404,7 @@
/* OTP: 512B total; enter 0xB1, exit 0xC1 */
/* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PR,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -7388,7 +7428,7 @@
},
/* TODO: security register */
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
bit6 is quad enable */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi
I/O supported */
.voltage = {1650, 2000},
@@ -7430,7 +7470,7 @@
},
/* TODO: security register */
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
bit6 is quad enable */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi
I/O supported */
.voltage = {1650, 2000},
@@ -7472,7 +7512,7 @@
},
/* TODO: security register */
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
bit6 is quad enable */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi
I/O supported */
.voltage = {1650, 2000},
@@ -8028,7 +8068,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
TODO: check */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
@@ -8062,7 +8102,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
TODO: check */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_1, /* 128 */
.read = spi_chip_read,
.voltage = {2700, 3600},
@@ -8091,7 +8131,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
TODO: check */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
@@ -8121,7 +8161,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
TODO: check */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_1, /* 128 */
.read = spi_chip_read,
.voltage = {2700, 3600},
@@ -8208,7 +8248,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
TODO: check */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
@@ -8237,7 +8277,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
TODO: check */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
@@ -8265,7 +8305,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
TODO: check */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
@@ -8294,7 +8334,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
TODO: check */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
@@ -8323,7 +8363,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
TODO: check */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
@@ -8352,7 +8392,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
TODO: check */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
@@ -8381,7 +8421,7 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /*
TODO: check */
- .unlock = spi_disable_blockprotect,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
@@ -9635,7 +9675,7 @@
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_res2, /* The continuation code is
transferred as the 3rd byte m( */
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -12014,7 +12054,7 @@
.total_size = 256,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
@@ -12898,7 +12938,7 @@
},
.block_erase = erase_block_82802ab,
}, {
- .eraseblocks = { {256 * 1024, 1}, },
+ .eraseblocks = { {256 * 1024, 1} },
.block_erase = NULL, /* Only in A/A mux mode */
}
},
@@ -13330,7 +13370,7 @@
/* supports SFDP */
/* OTP: 756B total; read 0x48; write 0x42, erase 0x44, read ID
0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
- .tested = TEST_OK_PR,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
Modified: trunk/flashchips.h
==============================================================================
--- trunk/flashchips.h Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/flashchips.h Sun Feb 8 22:57:52 2015 (r1879)
@@ -27,7 +27,7 @@
/*
* Please keep this list sorted alphabetically by manufacturer. The first
* entry of each section should be the manufacturer ID, followed by the
- * list of devices from that manufacturer (sorted by device IDs).
+ * list of devices from that manufacturer (sorted by device ID).
*
* Most LPC/FWH parts (parallel flash) have 8-bit device IDs if there is no
* continuation code.
@@ -303,6 +303,8 @@
#define EON_EN29LV010 0x7F6E
#define EON_EN29LV040 0x4F /* Same as EN29LV040A */
#define EON_EN29LV640B 0xCB
+#define EON_EN29LV640T 0xC9
+#define EON_EN29LV640U 0x7E
#define EON_EN29F002T 0x7F92 /* Same as EN29F002A */
#define EON_EN29F002B 0x7F97 /* Same as EN29F002AN */
#define EON_EN29GL064HL 0x7E0C01 /* Uniform Sectors, WP
protects Top OR Bottom sector */
@@ -466,13 +468,13 @@
* and use the same set of IDs. */
#define MACRONIX_MX25L512 0x2010 /* Same as MX25L512E, MX25V512,
MX25V512C */
#define MACRONIX_MX25L1005 0x2011 /* Same as MX25L1005C, MX25L1006E */
-#define MACRONIX_MX25L2005 0x2012 /* Same as MX25L2005C */
-#define MACRONIX_MX25L4005 0x2013 /* Same as MX25L4005A, MX25L4005C */
-#define MACRONIX_MX25L8005 0x2014 /* Same as MX25V8005; FIXME: MX25L8073E
(4k 0x20) */
+#define MACRONIX_MX25L2005 0x2012 /* Same as MX25L2005C, MX25L2006E */
+#define MACRONIX_MX25L4005 0x2013 /* Same as MX25L4005A, MX25L4005C,
MX25L4006E */
+#define MACRONIX_MX25L8005 0x2014 /* Same as MX25V8005, MX25L8006E,
FIXME: MX25L8073E (4k 0x20) */
#define MACRONIX_MX25L1605 0x2015 /* MX25L1605 (64k 0x20);
MX25L1605A/MX25L1606E (4k 0x20, 64k 0x52); MX25L1605D/MX25L1608D/MX25L1673E (4k
0x20) */
#define MACRONIX_MX25L3205 0x2016 /* MX25L3205, MX25L3205A (64k 0x20);
MX25L3205D/MX25L3208D (4k 0x20); MX25L3206E (4k 0x20, 64k 0x52); MX25L3273E (4k
0x20, 32k 0x52) */
-#define MACRONIX_MX25L6405 0x2017 /* MX25L6405, MX25L6405D (64k 0x20);
MX25L6406E/MX25L6436E (4k 0x20); MX25L6445E/MX25L6473E (4k 0x20, 32k 0x52) */
-#define MACRONIX_MX25L12805 0x2018 /* Same as MX25L12805D, MX25L12835F,
MX25L12845E (the latter two support completely new ID commands) */
+#define MACRONIX_MX25L6405 0x2017 /* MX25L6405, MX25L6405D (64k 0x20);
MX25L6406E/MX25L6436E (4k 0x20); MX25L6445E/MX25L6465E/MX25L6473E (4k 0x20, 32k
0x52) */
+#define MACRONIX_MX25L12805D 0x2018 /* MX25L12805D (no 32k); MX25L12865E,
MX25L12835F, MX25L12845E (32k 0x52) */
#define MACRONIX_MX25L25635F 0x2019 /* Same as MX25L25639F, but the latter
seems to not support REMS */
#define MACRONIX_MX25L1635D 0x2415
#define MACRONIX_MX25L1635E 0x2515 /* MX25L1635{E} */
@@ -784,6 +786,48 @@
#define ST_M29W010B 0x23
#define ST_M29W040B 0xE3
#define ST_M29W512B 0x27
+#define ST_M28W160ECB 0x88CF
+#define ST_M28W160ECT 0x88CE
+#define ST_M28W320FCB 0x88BB
+#define ST_M28W320FCT 0x88BA
+#define ST_M28W640HCB 0x8849
+#define ST_M28W640HCT 0x8848
+#define ST_M29DW127G 0x7E2004
+#define ST_M29W128GH 0x7E2101
+#define ST_M29W128GL 0x7E2100
+#define ST_M29W160EB 0x2249
+#define ST_M29W160ET 0x22C4
+#define ST_M29W256GH 0x7E21xx
+#define ST_M29W256GL 0x7E21xx
+#define ST_M29W320DB 0x88CB
+#define ST_M29W320DT 0x88CA
+#define ST_M29W400FB 0x00EF
+#define ST_M29W400FT 0x00EE
+#define ST_M29W512GH 0x7E2301
+#define ST_M29W640FB 0x22FD
+#define ST_M29W640FT 0x22ED
+#define ST_M29W640GB 0x7E1000
+#define ST_M29W640GH 0x7E0C01
+#define ST_M29W640GL 0x7E0C00
+#define ST_M29W640GT 0x7E1001
+#define ST_M29W800FB 0x225B
+#define ST_M29W800FT 0x22D7
+#define ST_M58BW16FB 0x8839
+#define ST_M58BW16FT 0x883A
+#define ST_M58BW32FB 0x8837
+#define ST_M58BW32FT 0x8838
+#define ST_M58WR016KB 0x8813
+#define ST_M58WR016KT 0x8812
+#define ST_M58WR032KB 0x8815
+#define ST_M58WR032KT 0x8814
+#define ST_M58WR064KB 0x8811
+#define ST_M58WR064KT 0x8810
+#define ST_MT28GU01G___1 0x88B0
+#define ST_MT28GU01G___2 0x88B1
+#define ST_MT28GU256___1 0x8901
+#define ST_MT28GU256___2 0x8904
+#define ST_MT28GU512___1 0x887E
+#define ST_MT28GU512___2 0x8881
#define ST_N25Q016__1E 0xBB15 /* N25Q016, 1.8V, (uniform sectors
expected) */
#define ST_N25Q032__3E 0xBA16 /* N25Q032, 3.0V, (uniform sectors
expected) */
#define ST_N25Q032__1E 0xBB16 /* N25Q032, 1.8V, (uniform sectors
expected) */
Modified: trunk/flashrom.8.tmpl
==============================================================================
--- trunk/flashrom.8.tmpl Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/flashrom.8.tmpl Sun Feb 8 22:57:52 2015 (r1879)
@@ -1094,6 +1094,8 @@
.br
Joshua Roys
.br
+Ky\[:o]sti M\[:a]lkki
+.br
Luc Verhaegen
.br
Li-Ta Lo
@@ -1140,7 +1142,7 @@
.br
some others, please see the flashrom svn changelog for details.
.br
-All authors can be reached via email at <[email protected]>.
+All still active authors can be reached via email at <[email protected]>.
.PP
This manual page was written by Uwe Hermann <[email protected]>,
Carl-Daniel Hailfinger and others.
Modified: trunk/flashrom.c
==============================================================================
--- trunk/flashrom.c Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/flashrom.c Sun Feb 8 22:57:52 2015 (r1879)
@@ -2020,7 +2020,7 @@
// ////////////////////////////////////////////////////////////
if (write_it && erase_and_write_flash(flash, oldcontents, newcontents))
{
- msg_cerr("Uh oh. Erase/write failed.");
+ msg_cerr("Uh oh. Erase/write failed. ");
if (read_all_first) {
msg_cerr("Checking if anything has changed.\n");
msg_cinfo("Reading current flash chip contents... ");
Modified: trunk/ichspi.c
==============================================================================
--- trunk/ichspi.c Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/ichspi.c Sun Feb 8 22:57:52 2015 (r1879)
@@ -1195,7 +1195,7 @@
struct block_eraser *eraser;
total_size = hwseq_data.size_comp0 + hwseq_data.size_comp1;
- msg_cdbg("Found %d attached SPI flash chip",
+ msg_cdbg("Hardware sequencing reports %d attached SPI flash chip",
(hwseq_data.size_comp1 != 0) ? 2 : 1);
if (hwseq_data.size_comp1 != 0)
msg_cdbg("s with a combined");
@@ -1210,14 +1210,14 @@
erase_size_high = ich_hwseq_get_erase_block_size(boundary);
if (boundary == 0) {
- msg_cdbg("There is only one partition containing the whole "
+ msg_cdbg2("There is only one partition containing the whole "
"address space (0x%06x - 0x%06x).\n", 0, size_high-1);
eraser->eraseblocks[0].size = erase_size_high;
eraser->eraseblocks[0].count = size_high / erase_size_high;
- msg_cdbg("There are %d erase blocks with %d B each.\n",
+ msg_cdbg2("There are %d erase blocks with %d B each.\n",
size_high / erase_size_high, erase_size_high);
} else {
- msg_cdbg("The flash address space (0x%06x - 0x%06x) is divided "
+ msg_cdbg2("The flash address space (0x%06x - 0x%06x) is divided
"
"at address 0x%06x in two partitions.\n",
0, total_size-1, boundary);
size_low = total_size - size_high;
Modified: trunk/nicintel_eeprom.c
==============================================================================
--- trunk/nicintel_eeprom.c Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/nicintel_eeprom.c Sun Feb 8 22:57:52 2015 (r1879)
@@ -275,7 +275,7 @@
.erase = nicintel_ee_erase,
};
-static int nicintel_spi_shutdown(void *eecp)
+static int nicintel_ee_shutdown(void *eecp)
{
uint32_t old_eec = *(uint32_t *)eecp;
/* Request bitbanging and unselect the chip first to be safe. */
@@ -323,7 +323,7 @@
return 1;
*eecp = eec;
- if (register_shutdown(nicintel_spi_shutdown, eecp))
+ if (register_shutdown(nicintel_ee_shutdown, eecp))
return 1;
}
Modified: trunk/print.c
==============================================================================
--- trunk/print.c Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/print.c Sun Feb 8 22:57:52 2015 (r1879)
@@ -141,7 +141,7 @@
msg_ginfo(" ");
msg_gdbg("range [V]");
msg_ginfo("\n\n");
- msg_ginfo("(P = PROBE, R = READ, E = ERASE, W = WRITE)\n\n");
+ msg_ginfo("(P = PROBE, R = READ, E = ERASE, W = WRITE, - = N/A)\n\n");
for (chip = flashchips; chip->name != NULL; chip++) {
/* Don't print generic entries. */
@@ -403,12 +403,14 @@
for (i = 0; i < maxboardlen - strlen(b->name); i++)
msg_ginfo(" ");
- if (b->working == OK)
- msg_ginfo("OK ");
- else if (b->working == NT)
- msg_ginfo("NT ");
- else
- msg_ginfo("BAD ");
+ switch (b->working) {
+ case OK: msg_ginfo("OK "); break;
+ case NT: msg_ginfo("NT "); break;
+ case DEP: msg_ginfo("DEP "); break;
+ case NA: msg_ginfo("N/A "); break;
+ case BAD:
+ default: msg_ginfo("BAD "); break;
+ }
for (e = board_matches; e->vendor_name != NULL; e++) {
if (strcmp(e->vendor_name, b->vendor)
@@ -548,7 +550,8 @@
B("Albatron", "PM266A Pro", OK,
"http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview&no=56";,
NULL), /* FIXME */
B("Alienware", "Aurora-R2", BAD, NULL, "Mainboard model is
0RV30W. Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the
flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is
locked."),
B("AOpen", "i945GMx-VFX", OK, NULL, "This is (also?) an
OEM board from FSC (used in e.g. ESPRIMO Q5010 with designation D2544-B1)."),
- B("AOpen", "vKM400Am-S", OK,
"http://usa.aopen.com/products_detail.aspx?Auno=824";, NULL),
+ B("AOpen", "UK79G-1394", OK,
"http://global.aopen.com/products_detail.aspx?auno=9";, "Used in EZ18
barebones"),
+ B("AOpen", "vKM400Am-S", OK,
"http://global.aopen.com/products_detail.aspx?Auno=824";, NULL),
B("Artec Group","DBE61", OK,
"http://wiki.thincan.org/DBE61";, NULL),
B("Artec Group","DBE62", OK,
"http://wiki.thincan.org/DBE62";, NULL),
B("ASI", "MB-5BLMP", OK,
"http://www.hojerteknik.com/winnet.htm";, "Used in the IGEL WinNET III thin
client."),
@@ -644,6 +647,7 @@
B("ASUS", "M4A89GTD PRO", OK,
"http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/";, NULL),
B("ASUS", "M4N68T V2", OK,
"http://www.asus.com/Motherboards/AMD_AM3/M4N68T_V2/";, NULL),
B("ASUS", "M4N78 PRO", OK,
"http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/";, NULL),
+ B("ASUS", "M4N78 SE", OK,
"http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_SE/";, NULL),
B("ASUS", "M5A78L-M LX", OK,
"http://www.asus.com/Motherboards/AMD_AM3Plus/M5A78LM_LX/";, "The MAC address of
the onboard LAN NIC is stored in flash, hence overwritten by flashrom; see
http://www.flashrom.org/pipermail/flashrom/2012-May/009200.html";),
B("ASUS", "M5A97 (rev. 1.0)", OK,
"http://www.asus.com/Motherboard/M5A97/";, NULL),
B("ASUS", "M5A99X EVO", OK,
"http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/";, NULL),
@@ -698,7 +702,7 @@
B("ASUS", "P5L-VM 1394", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/";, NULL),
B("ASUS", "P5LD2", OK, NULL, NULL),
B("ASUS", "P5LD2-MQ", OK,
"http://support.asus.com/download.aspx?SLanguage=en&p=8&s=12&m=Vintage-PH2&os=&hashedid=n/a";,
"Found in ASUS Vintage-PH2 barebones."),
- B("ASUS", "P5LD2-VM", NT,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5LD2VM/";, "Untested board
enable."),
+ B("ASUS", "P5LD2-VM", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5LD2VM/";, NULL),
B("ASUS", "P5LD2-VM DH", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5LD2VM_DH/";, NULL),
B("ASUS", "P5LP-LE (Lithium-UL8E)", OK,
"http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prodinfoCategory&cc=us&dlc=en&lc=en&product=1159887";,
"This is an OEM board from HP."),
B("ASUS", "P5LP-LE (Epson OEM)", OK, NULL, "This is an OEM board
from Epson (e.g. Endeavor MT7700)."),
@@ -824,6 +828,8 @@
B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2617";, NULL),
B("GIGABYTE", "GA-965P-DS4", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2288";, NULL),
B("GIGABYTE", "GA-970A-D3P (rev. 1.0)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=4642";, NULL),
+ B("GIGABYTE", "GA-970A-UD3P (rev. 2.0)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=5194";, "Primary flash
chip is a Macronix MX25L3206E."),
+ B("GIGABYTE", "GA-990FXA-UD3 (rev. 4.0)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=4672";, NULL),
B("GIGABYTE", "GA-A75M-UD2H", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3928";, NULL),
B("GIGABYTE", "GA-B85M-D3H", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=4567";, NULL),
B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2964";, NULL),
@@ -833,6 +839,7 @@
B("GIGABYTE", "GA-H61M-D2-B3", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3773";, NULL),
B("GIGABYTE", "GA-H61M-D2H-USB3", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=4004";, NULL),
B("GIGABYTE", "GA-H77-D3H", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=4141";, "Does only work
with -p internal:ich_spi_mode=hwseq due to an evil twin of MX25L6405 and ICH
SPI lockdown."),
+ B("GIGABYTE", "GA-H77-DS3H (rev. 1.1)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=4318";, NULL),
B("GIGABYTE", "GA-H77M-D3H", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=4388";, NULL),
B("GIGABYTE", "GA-K8N51GMF-9", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1939";, NULL),
B("GIGABYTE", "GA-K8N51GMF", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1950";, NULL),
@@ -853,6 +860,7 @@
B("GIGABYTE", "GA-MA790FX-DQ6", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2690";, NULL),
B("GIGABYTE", "GA-MA790GP-DS4H", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2887";, NULL),
B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3010";, NULL),
+ B("GIGABYTE", "GA-P55-USB3 (rev. 2.0)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3440";, NULL),
B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3436";, NULL),
B("GIGABYTE", "GA-P55A-UD7" , OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3324";, NULL),
B("GIGABYTE", "GA-P67A-UD3P", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3649";, NULL),
@@ -975,6 +983,7 @@
B("MSI", "MS-7756 (H77MA-G43)", OK,
"http://www.msi.com/product/mb/H77MA-G43.html";, NULL),
B("MSI", "MS-7808 (B75MA-E33)", OK,
"http://www.msi.com/product/mb/B75MA-E33.html";, NULL),
B("MSI", "MS-7816 (H87-G43)", OK,
"http://www.msi.com/product/mb/H87-G43.html";, NULL),
+ B("MSI", "MS-7817 (H81M-E33)", OK,
"http://www.msi.com/product/mb/H81ME33.html";, NULL),
B("MSI", "MS-9830 (IM-945GSE-A, A9830IMS)", OK,
"http://www.msi.com/product/ipc/IM-945GSE-A.html";, NULL),
B("NEC", "PowerMate 2000", OK,
"http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/";,
NULL),
B("Nokia", "IP530", OK, NULL, NULL),
@@ -1131,7 +1140,7 @@
B("IBM/Lenovo", "ThinkPad T420", BAD,
"http://www.thinkwiki.org/wiki/Category:T420";, "Probing works (Macronix
MX25L6405, 8192 kB, SPI), but parts of the flash are problematic: descriptor is
r/o (conforming to ICH reqs) and ME is locked. Also, a Protected Range is
locking the top range of the BIOS region (presumably the boot block)."),
B("IBM/Lenovo", "ThinkPad T410s", BAD,
"http://www.thinkwiki.org/wiki/Category:T410s";, "Probing works (Winbond W25X64,
8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o
(conforming to ICH reqs) and ME is locked. Also, a Protected Range is locking
the top range of the BIOS region (presumably the boot block)."),
B("IBM/Lenovo", "ThinkPad X1", BAD,
"http://www.thinkwiki.org/wiki/Category:X1";, "Probing works (ST M25PX64, 8192
kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming
to ICH reqs) and ME is locked. Also, a Protected Range is locking the top range
of the BIOS region (presumably the boot block)."),
- B("IBM/Lenovo", "ThinkPad T530", OK,
"http://www.thinkwiki.org/wiki/Category:T530";, "Works fine but only with
coreboot (due to locked regions and additional PR restrictions)."),
+ B("IBM/Lenovo", "ThinkPad T530", DEP,
"http://www.thinkwiki.org/wiki/Category:T530";, "Works fine but only with
coreboot (due to locked regions and additional PR restrictions)."),
B("IBM/Lenovo", "ThinkPad 240", BAD,
"http://www.stanford.edu/~bresnan//tp240.html";, "Seems to (partially) work at
first, but one block/sector cannot be written which then leaves you with a
bricked laptop. Maybe this can be investigated and fixed in software later."),
B("IBM/Lenovo", "3000 V100 TF05Cxx", OK,
"http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3000Notebook&series=Lenovo+3000+V+Series#viewallmodelstop";,
NULL),
//B("MSI", "GT60-2OD", OK,
"http://www.msi.com/product/nb/GT60_2OD.html";, NULL), requires layout patches
Modified: trunk/programmer.c
==============================================================================
--- trunk/programmer.c Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/programmer.c Sun Feb 8 22:57:52 2015 (r1879)
@@ -119,7 +119,7 @@
int registered_master_count = 0;
/* This function copies the struct registered_master parameter. */
-int register_master(struct registered_master *mst)
+int register_master(const struct registered_master *mst)
{
if (registered_master_count >= MASTERS_MAX) {
msg_perr("Tried to register more than %i master "
Modified: trunk/programmer.h
==============================================================================
--- trunk/programmer.h Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/programmer.h Sun Feb 8 22:57:52 2015 (r1879)
@@ -321,8 +321,6 @@
#define SUPERIO_VENDOR_WINBOND 0x2
#endif
#if NEED_PCI == 1
-struct pci_filter;
-struct pci_dev *pci_dev_find_filter(struct pci_filter filter);
struct pci_dev *pci_dev_find_vendorclass(uint16_t vendor, uint16_t devclass);
struct pci_dev *pci_dev_find(uint16_t vendor, uint16_t device);
struct pci_dev *pci_card_find(uint16_t vendor, uint16_t device,
@@ -691,7 +689,7 @@
};
extern struct registered_master registered_masters[];
extern int registered_master_count;
-int register_master(struct registered_master *mst);
+int register_master(const struct registered_master *mst);
/* serprog.c */
#if CONFIG_SERPROG == 1
Modified: trunk/sb600spi.c
==============================================================================
--- trunk/sb600spi.c Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/sb600spi.c Sun Feb 8 22:57:52 2015 (r1879)
@@ -141,7 +141,7 @@
} else if (rev == 0x16) {
amd_gen = CHIPSET_BOLTON;
msg_pdbg("Bolton detected.\n");
- } else if (rev >= 0x39 && rev <= 0x3A) {
+ } else if ((rev >= 0x39 && rev <= 0x3A) || rev == 0x42) {
amd_gen = CHIPSET_YANGTZE;
msg_pdbg("Yangtze detected.\n");
} else {
@@ -498,7 +498,7 @@
free(arg);
/* TODO: we should not only look at IntegratedImcPresent (LPC Dev 20,
Func 3, 40h) but also at
- * IMCEnable(Strap) and Override EcEnable(Strap) (sb8xx, sb9xx?, a50:
Misc_Reg: 80h-87h;
+ * IMCEnable(Strap) and Override EcEnable(Strap) (sb8xx, sb9xx?, a50,
Bolton: Misc_Reg: 80h-87h;
* sb7xx, sp5100: PM_Reg: B0h-B1h) etc. */
uint8_t reg = pci_read_byte(dev, 0x40);
if ((reg & (1 << 7)) == 0) {
Modified: trunk/spi25_statusreg.c
==============================================================================
--- trunk/spi25_statusreg.c Tue Jan 27 19:07:50 2015 (r1878)
+++ trunk/spi25_statusreg.c Sun Feb 8 22:57:52 2015 (r1879)
@@ -260,7 +260,7 @@
/* Fall through. */
case 4:
msg_cdbg("Chip status register: Block Protect 4 (BP4) is
%sset\n",
- (status & (1 << 5)) ? "" : "not ");
+ (status & (1 << 6)) ? "" : "not ");
case 3:
msg_cdbg("Chip status register: Block Protect 3 (BP3) is
%sset\n",
(status & (1 << 5)) ? "" : "not ");
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
