On Mon, 9 Feb 2015 19:52:06 +0200 Kaloyan Mihaylov <[email protected]> wrote:
> flashrom.exe -p ft2232_spi:type=arm-usb-tiny-h - > E > flashrom v0.9.6.1-r1704 on Windows 6.1 (x86) > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OK. > Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ft2232_spi. > Erasing and writing flash chip... FAILED at 0x00000000! Expected=0xff, > Found=0xe > 5, failed byte count from 0x00000000-0x00000fff: 0x9ca > ERASE FAILED! > Reading current flash chip contents... done. FAILED at 0x00008000! > Expected=0xff > , Found=0x85, failed byte count from 0x00008000-0x0000ffff: 0x4bb9 > ERASE FAILED! > Reading current flash chip contents... done. FAILED at 0x00008000! > Expected=0xff > , Found=0x85, failed byte count from 0x00000000-0x0000ffff: 0x4cb2 > ERASE FAILED! > Reading current flash chip contents... done. FAILED at 0x00050200! > Expected=0xff > , Found=0x00, failed byte count from 0x00000000-0x007fffff: 0x30e > ERASE FAILED! > Reading current flash chip contents... done. FAILED at 0x002e9800! > Expected=0xff > , Found=0x00, failed byte count from 0x00000000-0x007fffff: 0x700 > ERASE FAILED! > FAILED! > Your flash chip is in an unknown state. > Please report this on IRC at chat.freenode.net (channel #flashrom) or > mail [email protected], thanks! Hi, that looks like erasing worked only sometimes... well, most of the times, but not always. Have you connected all pins of the flash chip? Is it still connected to a board? In the latter case please see http://flashrom.org/ISP for possible culprits. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
