Ok, i will try to document better this problem and see what i can find. In the mean time i sent you a new board that i just tested and works ok.
Thank you for the help. Keep in touch On Thu, Feb 19, 2015 at 12:38 AM, Stefan Tauner < [email protected]> wrote: > On Thu, 19 Feb 2015 01:04:34 +0300 > "nicolae788 ." <[email protected]> wrote: > > > Thank you very much for your response. I will check the link and hope to > > manage and enable it. One last question: if a board recognizes a 512kb > chip > > is it normal to not recognize the above described ( SST 49LF008A ) 1Mb > chip > > ??? I have a board with which i could do the flash procedure, it is > > fully supported by flashrom, flash chip, chipset, board, but it doesn;t > > seem to find the chip i want to flash. The original 512 Kb chip it's > listed > > when i run flashrom, but when i change chips with the 1Mb one and run > again > > flashrom the new chip it's not recognized... > > There are different kinds of protocols involved and it is possible that > chips with the same form factor/package are not compatible. > http://flashrom.org/Technology#Communication_bus_protocol > You should state more facts and/or post logs if you need more help. > > -- > Kind regards/Mit freundlichen Grüßen, Stefan Tauner >
_______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
