Hi!
SST25LF040A: Gigabyte GA-8I945GZME-RH rev.1.0 successfully flashed from BIOS
ver F6 to F10
--
with best regards
Alexander.V Trubitsyn
flashrom v0.9.8-r1888 on Linux 3.19.3-1-desktop (x86_64)
flashrom was built with libpci 3.3.0, GCC 4.8.3 20141208 [gcc-4_8-branch
revision 218481], little endian
Command line (8 args): /usr/sbin/flashrom -p internal -c SST25LF040A -Vr
_8I945GZME-RH_BIOSF608_29_2006__20150429220348.flash -o
_8I945GZME-RH_BIOSF608_29_2006__20150429220348.flash_read.txt
Calibrating delay loop... OS timer resolution is 1 usecs, 1190M loops per
second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus =
9973 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
Using Internal DMI decoder.
DMI string chassis-type: "Desktop"
DMI string system-manufacturer: " "
DMI string system-product-name: " "
DMI string system-version: " "
DMI string baseboard-manufacturer: "Gigabyte Technology Co., Ltd."
DMI string baseboard-product-name: "8I945GZME-RH"
DMI string baseboard-version: "x.x"
Found ITE Super I/O, ID 0x8718 on port 0x2e
Found chipset "Intel ICH7/ICH7R" with PCI ID 8086:27b8.
Enabling flash write... Root Complex Register Block address = 0xfed1c000
GCS = 0x464: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI)
Top Swap: not enabled
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
SPI Read Configuration: prefetching disabled, caching enabled,
BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled
SPIBAR = 0x00007fb3f2599000 + 0x3020
0x00: 0x0004 (SPIS)
0x02: 0x4140 (SPIC)
0x04: 0x00000000 (SPIA)
0x50: 0x00000000 (BBAR)
0x54: 0x5006 (PREOP)
0x56: 0x0bb4 (OPTYPE)
0x58: 0x90200105 (OPMENU)
0x5c: 0x00000302 (OPMENU+4)
0x60: 0x00000000 (PBR0)
0x64: 0x00000000 (PBR1)
0x68: 0x00000000 (PBR2)
Programming OPCODES...
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
OP Type Pre-OP
op[0]: 0x02, write w/ addr, none
op[1]: 0x03, read w/ addr, none
op[2]: 0xd8, write w/ addr, none
op[3]: 0x05, read w/o addr, none
op[4]: 0x90, read w/ addr, none
op[5]: 0x01, write w/o addr, none
op[6]: 0x9f, read w/o addr, none
op[7]: 0xc7, write w/o addr, none
Pre-OP 0: 0x06, Pre-OP 1: 0x50
OK.
No IT87* serial flash segment enabled.
The following protocols are supported: FWH, SPI.
Probing for SST SST25LF040A, 512 kB:
program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190
on-the-fly OPCODE (0xAB) re-programmed, op-pos=2
probe_spi_res2: id1 0xbf, id2 0x44
Found SST flash chip "SST25LF040A" (512 kB, SPI) mapped at physical address
0x00000000fff80000.
Chip status register is 0x00.
Chip status register: Block Protect Write Disable (BPL) is not set
Chip status register: Auto Address Increment Programming (AAI) is not set
Chip status register: Block Protect 3 (BP3) is not set
Chip status register: Block Protect 2 (BP2) is not set
Chip status register: Block Protect 1 (BP1) is not set
Chip status register: Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Block protection is disabled.
Reading flash... done.
Restoring MMIO space at 0x7fb3f259c070
Restoring MMIO space at 0x7fb3f259c07c
Restoring MMIO space at 0x7fb3f259c078
Restoring MMIO space at 0x7fb3f259c076
Restoring MMIO space at 0x7fb3f259c074
Restoring PCI config space for 00:1f:0 reg 0xdc
superiotool r6158
Probing for ALi Super I/O at 0x3f0...
Failed. Returned data: id=0xffff, rev=0xff
Probing for ALi Super I/O at 0x370...
Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x4e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x2e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x4e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for ITE Super I/O (init=standard) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8502e) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=standard) at 0x2e...
Found ITE IT8718F (id=0x8718, rev=0x1) at 0x2e
Register dump:
idx 20 21 22 23 24 2b
val 87 18 01 10 00 00
def 87 18 01 00 00 00
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1
val 00 00 00 00 04 00 80
def 00 03 f0 06 02 00 00
LDN 0x01 (COM1)
idx 30 60 61 70 f0 f1 f2 f3
val 01 03 f8 04 00 50 00 7f
def 00 03 f8 04 00 50 00 7f
LDN 0x02 (COM2)
idx 30 60 61 70 f0 f1 f2 f3
val 01 02 f8 03 00 50 00 7f
def 00 02 f8 03 00 50 00 7f
LDN 0x03 (Parallel port)
idx 30 60 61 62 63 70 74 f0
val 01 03 78 00 00 07 04 08
def 00 03 78 07 78 07 03 03
LDN 0x04 (Environment controller)
idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6
val 01 02 90 00 00 00 80 00 0a 00 80 00 ff
def 00 02 90 02 30 09 00 00 00 00 00 NA NA
LDN 0x05 (Keyboard)
idx 30 60 61 62 63 70 71 f0
val 01 00 60 00 64 01 02 68
def 01 00 60 00 64 01 02 00
LDN 0x06 (Mouse)
idx 30 70 71 f0
val 01 0c 02 00
def 00 0c 02 00
LDN 0x07 (GPIO)
idx 25 26 27 28 29 2a 2c 60 61 62 63 64 65 70 71 72 73 74 b0 b1 b2 b3 b4 b5
b8 b9 ba bb bc bd c0 c1 c2 c3 c4 c5 c8 c9 ca cb cc e0 e1 e2 e3 e4 e5 e6 e7
f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd fe ff
val 00 02 00 40 00 00 1c 00 00 08 00 00 00 00 00 00 38 00 00 00 00 00 00 00
00 02 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 26 00 00 00 00 00 4a 00 00 00
def 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 20 38 00 00 00 00 00 00 00
00 00 00 00 00 00 01 00 00 40 00 00 01 00 00 40 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 NA 00 00 00
LDN 0x0a (Consumer IR)
idx 30 60 61 70 f0
val 00 03 10 0b 06
def 00 03 10 0b 00
Environment controller (0x0295)
Register dump:
idx 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17
18 19 1a 1b 1c 1d 20 21 22 23 24 25 26 27 28 29 2a 2b 30 31 32 33 34 35 36
37 38 39 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 50 51 52 53 54 56 57 58 59 5b
5c 5d 5e 5f 60 61 62 63 64 65 68 69 6a 6b 6c 6d 70 71 72 73 74 75 80 81 82
83 88 89 8a 8b 8c 8d 8e 8f 90 91 92 94 95 96 a0 a1 a2 a3 a4 a5 a6
val 11 11 88 00 37 ff 00 37 ff 87 40 09 07 5d ff ff fe ff ff 73 d7 82 7f 7f
04 ff ff ff ff ff 46 72 cf ff ca 02 50 ff ff cb fe 19 ff 00 ff 00 ff 00 ff
00 ff 00 ff 00 ff 00 ff 00 7f 7f 7f 7f 3c 7f ff 1c 7f 7f 7f de de 90 de 12
05 00 00 00 00 14 41 23 90 03 7f 7f 7f 00 00 7f 00 14 41 23 90 03 00 00 00
00 00 00 00 00 00 00 02 00 ff 00 00 ff 00 00 00 00 00 00 00 00 00
def 18 00 00 00 00 00 00 00 00 80 40 09 00 NA NA NA NA NA NA 07 50 MM MM MM
NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA
NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA 00 00 7f 7f 7f 00 00 90 00 12
00 00 00 00 7f 7f 7f 00 00 7f 7f 7f 7f 00 00 7f 7f 7f 7f 00 00 7f NA NA NA
NA 00 00 00 00 00 00 02 00 ff 00 00 ff 00 00 00 00 00 00 00 00 00
Probing for ITE Super I/O (init=standard) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x15c...
Failed. Returned data: port=0xff, port+1=0xff
Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e...
Failed. Returned data: sid=0xff, id=0x00, rev=0x00
Probing for Nuvoton Super I/O (sid=0xfc) at 0x2e...
Failed. Returned data: sid=0xff, id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for VIA Super I/O at 0x3f0...
PCI device 1106:0686 not found.
flashrom v0.9.8-r1888 on Linux 3.19.3-1-desktop (x86_64)
flashrom was built with libpci 3.3.0, GCC 4.8.3 20141208 [gcc-4_8-branch
revision 218481], little endian
Command line (8 args): /usr/sbin/flashrom -p internal -c SST25LF040A -VVw
945gzmer.f10 -o _8I945GZME-RH_BIOSF608_29_2006__20150429223344.flash_write.txt
Calibrating delay loop... OS timer resolution is 1 usecs, 1194M loops per
second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1004 us, 10000 myus =
10007 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
Using Internal DMI decoder.
DMI string chassis-type: "Desktop"
DMI string system-manufacturer: " "
DMI string system-product-name: " "
DMI string system-version: " "
DMI string baseboard-manufacturer: "Gigabyte Technology Co., Ltd."
DMI string baseboard-product-name: "8I945GZME-RH"
DMI string baseboard-version: "x.x"
Found ITE Super I/O, ID 0x8718 on port 0x2e
Found chipset "Intel ICH7/ICH7R" with PCI ID 8086:27b8.
Enabling flash write... Root Complex Register Block address = 0xfed1c000
GCS = 0x464: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI)
Top Swap: not enabled
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
SPI Read Configuration: prefetching disabled, caching enabled,
BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled
SPIBAR = 0x00007fcb77f37000 + 0x3020
0x00: 0x0000 (SPIS)
0x02: 0x4230 (SPIC)
0x04: 0x00000000 (SPIA)
0x50: 0x00000000 (BBAR)
0x54: 0x5006 (PREOP)
0x56: 0x0bb4 (OPTYPE)
0x58: 0x90200105 (OPMENU)
0x5c: 0x00000302 (OPMENU+4)
0x60: 0x00000000 (PBR0)
0x64: 0x00000000 (PBR1)
0x68: 0x00000000 (PBR2)
Programming OPCODES...
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
OP Type Pre-OP
op[0]: 0x02, write w/ addr, none
op[1]: 0x03, read w/ addr, none
op[2]: 0xd8, write w/ addr, none
op[3]: 0x05, read w/o addr, none
op[4]: 0x90, read w/ addr, none
op[5]: 0x01, write w/o addr, none
op[6]: 0x9f, read w/o addr, none
op[7]: 0xc7, write w/o addr, none
Pre-OP 0: 0x06, Pre-OP 1: 0x50
OK.
No IT87* serial flash segment enabled.
The following protocols are supported: FWH, SPI.
Probing for SST SST25LF040A, 512 kB:
program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190
on-the-fly OPCODE (0xAB) re-programmed, op-pos=2
probe_spi_res2: id1 0xbf, id2 0x44
Found SST flash chip "SST25LF040A" (512 kB, SPI) mapped at physical address
0x00000000fff80000.
Chip status register is 0x00.
Chip status register: Block Protect Write Disable (BPL) is not set
Chip status register: Auto Address Increment Programming (AAI) is not set
Chip status register: Block Protect 3 (BP3) is not set
Chip status register: Block Protect 2 (BP2) is not set
Chip status register: Block Protect 1 (BP1) is not set
Chip status register: Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Block protection is disabled.
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:E
program_opcodes: preop=5006 optype=463b opmenu=05200302c79f0190
on-the-fly OPCODE (0x20) re-programmed, op-pos=2
W, 0x001000-0x001fff:S, 0x002000-0x002fff:S, 0x003000-0x003fff:S,
0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:S,
0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S,
0x00a000-0x00afff:S, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:S,
0x00d000-0x00dfff:S, 0x00e000-0x00efff:S, 0x00f000-0x00ffff:S,
0x010000-0x010fff:EW, 0x011000-0x011fff:EW, 0x012000-0x012fff:EW,
0x013000-0x013fff:EW, 0x014000-0x014fff:EW, 0x015000-0x015fff:EW,
0x016000-0x016fff:EW, 0x017000-0x017fff:EW, 0x018000-0x018fff:EW,
0x019000-0x019fff:EW, 0x01a000-0x01afff:EW, 0x01b000-0x01bfff:EW,
0x01c000-0x01cfff:EW, 0x01d000-0x01dfff:EW, 0x01e000-0x01efff:EW,
0x01f000-0x01ffff:EW, 0x020000-0x020fff:EW, 0x021000-0x021fff:EW,
0x022000-0x022fff:EW, 0x023000-0x023fff:EW, 0x024000-0x024fff:EW,
0x025000-0x025fff:EW, 0x026000-0x026fff:EW, 0x027000-0x027fff:EW,
0x028000-0x028fff:EW, 0x029000-0x029fff:EW, 0x02a000-0x02afff:EW,
0x02b000-0x02bfff:EW, 0x02c000-0x02cfff:EW, 0x02d000-0x02dfff:EW,
0x02e000-0x02efff:EW, 0x02f000-0x02ffff:EW, 0x030000-0x030fff:EW,
0x031000-0x031fff:EW, 0x032000-0x032fff:EW, 0x033000-0x033fff:EW,
0x034000-0x034fff:EW, 0x035000-0x035fff:EW, 0x036000-0x036fff:EW,
0x037000-0x037fff:EW, 0x038000-0x038fff:EW, 0x039000-0x039fff:EW,
0x03a000-0x03afff:EW, 0x03b000-0x03bfff:EW, 0x03c000-0x03cfff:EW,
0x03d000-0x03dfff:EW, 0x03e000-0x03efff:EW, 0x03f000-0x03ffff:EW,
0x040000-0x040fff:EW, 0x041000-0x041fff:EW, 0x042000-0x042fff:EW,
0x043000-0x043fff:EW, 0x044000-0x044fff:EW, 0x045000-0x045fff:EW,
0x046000-0x046fff:EW, 0x047000-0x047fff:EW, 0x048000-0x048fff:EW,
0x049000-0x049fff:W, 0x04a000-0x04afff:S, 0x04b000-0x04bfff:S,
0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S, 0x04e000-0x04efff:S,
0x04f000-0x04ffff:S, 0x050000-0x050fff:S, 0x051000-0x051fff:S,
0x052000-0x052fff:S, 0x053000-0x053fff:S, 0x054000-0x054fff:S,
0x055000-0x055fff:S, 0x056000-0x056fff:W, 0x057000-0x057fff:W,
0x058000-0x058fff:W, 0x059000-0x059fff:W, 0x05a000-0x05afff:W,
0x05b000-0x05bfff:EW, 0x05c000-0x05cfff:EW, 0x05d000-0x05dfff:EW,
0x05e000-0x05efff:EW, 0x05f000-0x05ffff:EW, 0x060000-0x060fff:EW,
0x061000-0x061fff:EW, 0x062000-0x062fff:EW, 0x063000-0x063fff:EW,
0x064000-0x064fff:EW, 0x065000-0x065fff:EW, 0x066000-0x066fff:EW,
0x067000-0x067fff:EW, 0x068000-0x068fff:EW, 0x069000-0x069fff:EW,
0x06a000-0x06afff:EW, 0x06b000-0x06bfff:EW, 0x06c000-0x06cfff:EW,
0x06d000-0x06dfff:EW, 0x06e000-0x06efff:EW, 0x06f000-0x06ffff:EW,
0x070000-0x070fff:EW, 0x071000-0x071fff:EW, 0x072000-0x072fff:EW,
0x073000-0x073fff:EW, 0x074000-0x074fff:EW, 0x075000-0x075fff:EW,
0x076000-0x076fff:S, 0x077000-0x077fff:S, 0x078000-0x078fff:S,
0x079000-0x079fff:S, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S,
0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:EW,
0x07f000-0x07ffff:EW
Erase/write done.
Verifying flash... VERIFIED.
Restoring MMIO space at 0x7fcb77f3a070
Restoring MMIO space at 0x7fcb77f3a07c
Restoring MMIO space at 0x7fcb77f3a078
Restoring MMIO space at 0x7fcb77f3a076
Restoring MMIO space at 0x7fcb77f3a074
Restoring PCI config space for 00:1f:0 reg 0xdc
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller
Hub [8086:2770] (rev 02)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=09 <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ
Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at c000 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at e2080000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition
Audio Controller [8086:27d8] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd GA-8I945PG-RH Mainboard
[1458:a102]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at e20c0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41e1
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at bc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e20c4000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e0000000-e1ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Device [0000:0000]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge [8086:27b8] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: intel_rng, lpc_ich, leds_ss4200
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:b001]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, pata_acpi, ata_generic
00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA
Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:b002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at d400 [size=8]
Region 1: I/O ports at d800 [size=4]
Region 2: I/O ports at dc00 [size=8]
Region 3: I/O ports at e000 [size=4]
Region 4: I/O ports at e400 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix
Kernel modules: ata_piix, pata_acpi, ata_generic
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller
[8086:27da] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd GA-8I945PG-RH/GA-D525TUD
Mainboard [1458:5001]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:05.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: Gigabyte Technology Co., Ltd Marvell 88E8001 Gigabit
Ethernet Controller (Gigabyte) [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at e1000000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at a000 [size=256]
[virtual] Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=7 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
Read-only fields:
[PN] Part number: Yukon 88E8001
[EC] Engineering changes: Rev. 1.3
[MN] Manufacture ID: 4d 61 72 76 65 6c 6c
[SN] Serial number: AbCdEfG6e688b
[CP] Extended capability: 01 10 cc 03
[RV] Reserved: checksum good, 10 byte(s) reserved
Read/write fields:
[RW] Read-write area: 121 byte(s) free
End
Kernel driver in use: skge
Kernel modules: skge
# dmidecode 2.12
SMBIOS 2.3 present.
39 structures occupying 1175 bytes.
Table at 0x000F0100.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Award Software International, Inc.
Version: F6
Release Date: 08/29/2006
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 512 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer:
Product Name:
Version:
Serial Number:
UUID: Not Present
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: 8I945GZME-RH
Version: x.x
Serial Number:
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer:
Type: Desktop
Lock: Not Present
Version:
Serial Number:
Asset Tag:
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket 775
Type: Central Processor
Family: Celeron
Manufacturer: Intel
ID: 76 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 23, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Core(TM)2 Duo CPU
Voltage: 0.8 V
External Clock: 50 MHz
Max Speed: 4000 MHz
Current Speed: 300 MHz
Status: Populated, Enabled
Upgrade: Socket 478
L1 Cache Handle: 0x000A
L2 Cache Handle: 0x000B
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:
Handle 0x0005, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: 8-bit Parity
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 1024 MB
Maximum Total Memory Size: 4096 MB
Supported Speeds:
Other
Supported Memory Types:
Other
Memory Module Voltage: 5.0 V
Associated Memory Slots: 4
0x0006
0x0007
0x0008
0x0009
Enabled Error Correcting Capabilities:
None
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: 1
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 512 MB (Single-bank Connection)
Enabled Size: 512 MB (Single-bank Connection)
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: 2
Current Speed: Unknown
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A2
Bank Connections: 3
Current Speed: Unknown
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A3
Bank Connections: 4
Current Speed: Unknown
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 20 kB
Maximum Size: 20 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000B, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 0 kB
Maximum Size: 1024 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator:
External Connector Type: None
Port Type: Other
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator:
External Connector Type: None
Port Type: Other
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator:
External Connector Type: None
Port Type: 8251 FIFO Compatible
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM2
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT1
Internal Connector Type: DB-25 female
External Reference Designator:
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: Other
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: PS/2
External Reference Designator: Detected
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0016, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
SMBus signal is supported
Handle 0x0017, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 1
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
SMBus signal is supported
Handle 0x0018, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
SMBus signal is supported
Handle 0x0019, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 5
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
SMBus signal is supported
Handle 0x001A, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 3
n|US|iso8859-1
n|US|iso8859-1
r|CA|iso8859-1
Currently Installed Language: n|US|iso8859-1
Handle 0x001B, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x001C, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001B
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: Unknown
Type Detail: None
Speed: 66 MHz
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x001D, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001B
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x001E, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001B
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: A2
Bank Locator: Bank4/5
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x001F, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001B
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: A3
Bank Locator: Bank6/7
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None
Handle 0x0020, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Array Handle: 0x001B
Partition Width: 1
Handle 0x0021, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x001C
Memory Array Mapped Address Handle: 0x0020
Partition Row Position: 1
Handle 0x0022, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x001D
Memory Array Mapped Address Handle: 0x0020
Partition Row Position: 1
Handle 0x0023, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x001E
Memory Array Mapped Address Handle: 0x0020
Partition Row Position: 1
Handle 0x0024, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x001F
Memory Array Mapped Address Handle: 0x0020
Partition Row Position: 1
Handle 0x0025, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0026, DMI type 127, 4 bytes
End Of Table
flashrom v0.9.8-r1888 on Linux 3.19.3-1-desktop (x86_64)
flashrom was built with libpci 3.3.0, GCC 4.8.3 20141208 [gcc-4_8-branch
revision 218481], little endian
Command line (5 args): /usr/sbin/flashrom -p internal -V -o
_8I945GZME-RH_BIOSF608_29_2006__20150429220008.txt
Calibrating delay loop... OS timer resolution is 1 usecs, 1194M loops per
second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1003 us, 10000 myus =
10008 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
Using Internal DMI decoder.
DMI string chassis-type: "Desktop"
DMI string system-manufacturer: " "
DMI string system-product-name: " "
DMI string system-version: " "
DMI string baseboard-manufacturer: "Gigabyte Technology Co., Ltd."
DMI string baseboard-product-name: "8I945GZME-RH"
DMI string baseboard-version: "x.x"
Found ITE Super I/O, ID 0x8718 on port 0x2e
Found chipset "Intel ICH7/ICH7R" with PCI ID 8086:27b8.
Enabling flash write... Root Complex Register Block address = 0xfed1c000
GCS = 0x464: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI)
Top Swap: not enabled
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
SPI Read Configuration: prefetching disabled, caching enabled,
BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled
SPIBAR = 0x00007f73c2454000 + 0x3020
0x00: 0x0000 (SPIS)
0x02: 0x4230 (SPIC)
0x04: 0x00000000 (SPIA)
0x50: 0x00000000 (BBAR)
0x54: 0x5006 (PREOP)
0x56: 0x0bb4 (OPTYPE)
0x58: 0x90200105 (OPMENU)
0x5c: 0x00000302 (OPMENU+4)
0x60: 0x00000000 (PBR0)
0x64: 0x00000000 (PBR1)
0x68: 0x00000000 (PBR2)
Programming OPCODES...
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
OP Type Pre-OP
op[0]: 0x02, write w/ addr, none
op[1]: 0x03, read w/ addr, none
op[2]: 0xd8, write w/ addr, none
op[3]: 0x05, read w/o addr, none
op[4]: 0x90, read w/ addr, none
op[5]: 0x01, write w/o addr, none
op[6]: 0x9f, read w/o addr, none
op[7]: 0xc7, write w/o addr, none
Pre-OP 0: 0x06, Pre-OP 1: 0x50
OK.
No IT87* serial flash segment enabled.
The following protocols are supported: FWH, SPI.
Probing for AMIC A25L05PT, 64 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L05PU, 64 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L10PT, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L10PU, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L20PT, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L20PU, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L40PT, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L40PU, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L80P, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L16PT, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L16PU, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L512, 64 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L010, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L020, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L040, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L080, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L016, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L032, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25LQ16, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25LQ64, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF021, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF041A, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF081, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF081A, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF161, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF321, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF321A, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF641(A), 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DL081, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DL161, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DQ161, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25F512, 64 kB:
program_opcodes: preop=5006 optype=460b opmenu=05150302c79f0190
on-the-fly OPCODE (0x15) re-programmed, op-pos=2
probe_spi_at25f: id1 0xff, id2 0xff
Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff
Probing for Atmel AT25F512B, 64 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff
Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff
Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff
Probing for Atmel AT25FS010, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25FS040, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT26DF041, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT26DF081A, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT26DF161, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT26DF161A, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT26F004, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45CS1282, 16896 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB011D, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB021D, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB041D, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB081D, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB161D, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB321C, 4224 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB321D, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB321E, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB642D, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ESMT F25L008A, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ESMT F25L32PA, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B05, 64 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B05T, 64 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25P05, 64 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B10, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B10T, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25P10, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B20, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B20T, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25P20, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B40, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B40T, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25P40, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B80, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B80T, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25P80, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B16, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B16T, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25P16, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B32, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B32T, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25P32, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B64, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B64T, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25P64, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F05, 64 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F10, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F20, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F40, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F80, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F16, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F32, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F64, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25Q40, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25Q80(A), 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25Q16, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25Q32(A/B), 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25Q64, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25Q128, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25QH16, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25QH32, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25QH64, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25QH128, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25S10, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25S20, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25S40, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25S80, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25S16, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25S32, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25S64, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for GigaDevice GD25LQ32, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for GigaDevice GD25Q512, 64 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for GigaDevice GD25Q10, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for GigaDevice GD25Q20(B), 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for GigaDevice GD25Q40(B), 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for GigaDevice GD25Q80(B), 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for GigaDevice GD25Q16(B), 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for GigaDevice GD25Q32(B), 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for GigaDevice GD25Q64(B), 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for GigaDevice GD25Q128B, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for GigaDevice GD25T80, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Intel 25F160S33B8, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Intel 25F160S33T8, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Intel 25F320S33B8, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Intel 25F320S33T8, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Intel 25F640S33B8, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Intel 25F640S33T8, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX23L1654, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX23L3254, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX23L6454, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX23L12854, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L2005(C)/MX25L2006E, 256 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L4005(A/C)/MX25L4006E, 512 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L8005/MX25L8006E/MX25L8008E/MX25V8005, 1024 kB: RDID
byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L1605, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L1605A/MX25L1606E/MX25L1608E, 2048 kB: RDID byte 0
parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: RDID byte 0
parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L1635D, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L1635E, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L3205(A), 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L3206E/MX25L3208E, 4096 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L3273E, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L3235D, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L6405, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L6405D, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L6406E/MX25L6408E, 8192 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E, 8192 kB: RDID
byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L12805D, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L12835F/MX25L12845E/MX25L12865E, 16384 kB: RDID byte 0
parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25U1635E, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25U3235E/F, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25U6435E/F, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25U12835F, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L6495F, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25P05-A, 64 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of REMS.
Probing for Micron/Numonyx/ST M25P10-A, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of REMS.
Probing for Micron/Numonyx/ST M25P20, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of
REMS.
Probing for Micron/Numonyx/ST M25P40, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of
REMS.
Probing for Micron/Numonyx/ST M25P80, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25P16, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25P32, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25P64, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25P128, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25PE10, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25PE20, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25PE40, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25PE80, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25PE16, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25PX80, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25PX16, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25PX32, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M25PX64, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M45PE10, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M45PE20, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M45PE40, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M45PE80, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST M45PE16, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST N25Q016, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Nantronics N25S10, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Nantronics N25S20, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Nantronics N25S40, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Nantronics N25S80, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Nantronics N25S16, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LD256C, 32 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LD512(C), 64 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LD010(C), 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LD020(C), 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LD040(C), 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LV512(A), 64 kB:
program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190
on-the-fly OPCODE (0xAB) re-programmed, op-pos=2
probe_spi_res2: id1 0xbf, id2 0x44
Probing for PMC Pm25LV010, 128 kB: probe_spi_res2: id1 0xbf, id2 0x44
Probing for PMC Pm25LV010A, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LV020, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LV040, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LV080B, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LV016B, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Sanyo LE25FW106, 128 kB: probe_spi_res2: id1 0xbf, id2 0x44
Probing for Sanyo LE25FW406A, 512 kB: probe_spi_res2: id1 0xbf, id2 0x44
Probing for Sanyo LE25FU406B, 512 kB: probe_spi_res2: id1 0xbf, id2 0x44
Probing for Sanyo LE25FW203A, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Sanyo LE25FW403A, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0xbf, id2 0x44
Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0xbf, id2 0x44
Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0xbf, id2 0x44
Probing for Spansion S25FL004A, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL008A, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL016A, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL032A/P, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL064A/P, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL204K, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL208K, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL116K/S25FL216K, 2048 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL132K, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL164K, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL127S-64kB, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL127S-256kB, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL128P......0, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL128P......1, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL128S......0, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL128S......1, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL129P......0, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL129P......1, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25LF020A, 256 kB: probe_spi_rems: id1 0xbf, id2 0x44
Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0xbf, id2 0x44
Found SST flash chip "SST25LF040A" (512 kB, SPI) mapped at physical address
0x00000000fff80000.
Chip status register is 0x00.
Chip status register: Block Protect Write Disable (BPL) is not set
Chip status register: Auto Address Increment Programming (AAI) is not set
Chip status register: Block Protect 3 (BP3) is not set
Chip status register: Block Protect 2 (BP2) is not set
Chip status register: Block Protect 1 (BP1) is not set
Chip status register: Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0xbf, id2 0x44
Probing for SST SST25VF512(A), 64 kB: probe_spi_rems: id1 0xbf, id2 0x44
Probing for SST SST25VF010(A), 128 kB: probe_spi_rems: id1 0xbf, id2 0x44
Probing for SST SST25VF020, 256 kB: probe_spi_rems: id1 0xbf, id2 0x44
Probing for SST SST25VF020B, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xbf, id2 0x44
Found SST flash chip "SST25VF040" (512 kB, SPI) mapped at physical address
0x00000000fff80000.
Chip status register is 0x00.
Chip status register: Block Protect Write Disable (BPL) is not set
Chip status register: Auto Address Increment Programming (AAI) is not set
Chip status register: Block Protect 3 (BP3) is not set
Chip status register: Block Protect 2 (BP2) is not set
Chip status register: Block Protect 1 (BP1) is not set
Chip status register: Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Probing for SST SST25VF040B, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xbf, id2 0x44
Probing for SST SST25VF080B, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25VF016B, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25VF032B, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25VF064C, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25WF512, 64 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25WF010, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25WF020, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25WF040, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25WF080, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q40.V, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q80.V, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q16.V, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q32.V, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q64.V, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q128.V, 16384 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q20.W, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q40.W, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q80.W, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q16.W, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q32.W, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q64.W, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25X10, 128 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25X20, 256 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25X40, 512 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25X80, 1024 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25X16, 2048 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25X32, 4096 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25X64, 8192 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Unknown SFDP-capable chip, 0 kB:
program_opcodes: preop=5006 optype=462b opmenu=055a0302c79f0190
on-the-fly OPCODE (0x5A) re-programmed, op-pos=2
Signature = 0xffffffff (should be 0x50444653)
No SFDP signature found.
Probing for AMIC unknown AMIC SPI chip, 0 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel unknown Atmel SPI chip, 0 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon unknown Eon SPI chip, 0 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix unknown Macronix SPI chip, 0 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC unknown PMC SPI chip, 0 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST unknown SST SPI chip, 0 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ST unknown ST SPI chip, 0 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Sanyo unknown Sanyo SPI chip, 0 kB: RDID byte 0 parity violation.
probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: RDID byte 0
parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Generic unknown SPI chip (RDID), 0 kB: RDID byte 0 parity
violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xbf,
id2 0x44
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x6c, id2 0x5c, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49LH00B4, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is
normal flash content, id2 is normal flash content
Probing for Atmel AT49LH004, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is
normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is
normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is
normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x6c, id2 0x5c, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d, id1
is normal flash content, id2 is normal flash content
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is
normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x6c, id2 0x5c,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xcc, id2 0x31,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d,
id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is
normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x49, id2 0x4d,
id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is
normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is
normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is
normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is
normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is
normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x6c, id2 0x5c, id1 parity
violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity
violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is
normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is
normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d,
id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d,
id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x49, id2 0x4d,
id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x6c, id2 0x5c,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x49, id2 0x4d,
id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1
0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Multiple flash chip definitions match the detected chip(s): "SST25LF040A",
"SST25VF040"
Please specify which chip definition to use with the -c <chipname> option.
Restoring MMIO space at 0x7f73c2457070
Restoring MMIO space at 0x7f73c245707c
Restoring MMIO space at 0x7f73c2457078
Restoring MMIO space at 0x7f73c2457076
Restoring MMIO space at 0x7f73c2457074
Restoring PCI config space for 00:1f:0 reg 0xdc
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
