On Tue, 12 May 2015 05:42:31 +0000 (UTC) zahra rahim khani <[email protected]> wrote:
> Hello I run follow command and receives massagwhow can I solve it ? > sudo flashrom --p linux_spi:dev=/dev/spidev0.0 -V > flashrom v0.9.6.1-r1564 on Linux 3.18.11+ (armv6l)flashrom is free software, > get the source code at http://www.flashrom.org > flashrom was built with GCC 4.6.3, little endianCommand line (3 args): > flashrom --p linux_spi:dev=/dev/spidev0.0 -VCalibrating delay loop... OS > timer resolution is 4 usecs, 230M loops per second, 10 myus = 11 us, 100 myus > = 101 us, 1000 myus = 1009 us, 10000 myus = 10079 us, 16 myus = 18 us, > OK.Initializing linux_spi programmerUsing device /dev/spidev0.0The following > protocols are supported: SPI.Probing for AMIC A25L05PT, 64 kB: > probe_spi_rdid_generic: id1 0xef, id2 0x4 > ........ > Found Winbond flash chip "W25Q16" (2048 kB, SPI).This chip may contain > one-time programmable memory. flashrom cannot readand may never be able to > write it, hence it may not be able to completelyclone the contents of this > chip (see man page for details).No operations were specified. > The bests There is no problem, so there is nothing to solve. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
