On Mon, 18 May 2015 09:49:41 +0000 "Hänel-Baas, Alexander" <[email protected]> wrote:
> Hi > > >> Any idea what is going wrong or what can I do to get flashrom to work? > > No ideas what is going wrong? > > Another question is: How I select the Bay Trail Device? > > flashrom -VVV -p internal -c "Bay Trail" -r bios.txt > Error: Unknown chip 'Bay Trail' specified. > > I have tried Linux 3.14 and 3.18 with fashrom 0.98-r1888 > > The complete output (flashrom -VVV -p internal -r b.txt) was: > > Calibrating delay loop... OS timer resolution is 1 usecs, 488M loops per > second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1031 us, 10000 myus = > 10023 us, 4 myus = 5 us, OK. > Initializing internal programmer > No coreboot table found. > Using Internal DMI decoder. > page_size=1000 > pre-rounding: start=0x000f0000, len=0x10000, end=0x00100000 > post-rounding: start=0x000f0000, len=0x10000, end=0x00100000 > page_size=1000 > pre-rounding: start=0x000e2770, len=0x469, end=0x000e2bd9 > post-rounding: start=0x000e2000, len=0x1000, end=0x000e3000 > DMI string chassis-type: "Hand Held" > page_size=1000 > pre-rounding: start=0xb73f8770, len=0x469, end=0xb73f8bd9 > post-rounding: start=0xb73f8000, len=0x1000, end=0xb73f9000 > page_size=1000 > pre-rounding: start=0xb73f9000, len=0x10000, end=0xb7409000 > post-rounding: start=0xb73f9000, len=0x10000, end=0xb7409000 > Laptop detected via DMI. > DMI string system-manufacturer: "N/A" > DMI string system-product-name: "N/A" > DMI string system-version: "N/A" > DMI string baseboard-manufacturer: "Kontron Europe GmbH" > DMI string baseboard-product-name: "COMe-mBTc10" > DMI string baseboard-version: "A.0.0" > ======================================================================== > WARNING! You seem to be running flashrom on an unsupported laptop. > Laptops, notebooks and netbooks are difficult to support and we > recommend to use the vendor flashing utility. The embedded controller > (EC) in these machines often interacts badly with flashing. > See the manpage and http://www.flashrom.org/Laptops for details. > > If flash is shared with the EC, erase is guaranteed to brick your laptop > and write may brick your laptop. > Read and probe may irritate your EC and cause fan failure, backlight > failure and sudden poweroff. > You have been warned. > ======================================================================== > Aborting. > Error: Programmer initialization failed. > Hello again! The man page tells you how to proceed in this case. You can not "select" the chipset with the -c parameter but only the flash chip. All of that is documented... -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
