Author: stefanct
Date: Wed Jun  3 00:32:24 2015
New Revision: 1891
URL: http://flashrom.org/trac/flashrom/changeset/1891

Log:
Add support for PMC Pm25LQ020, Pm25LQ040, Pm25LQ080, Pm25LQ016, Pm25LQ032C.

Signed-off-by: Steven Honeyman <[email protected]>
Signed-off-by: Stefan Tauner <[email protected]>
Acked-by: Stefan Tauner <[email protected]>

Modified:
   trunk/flashchips.c
   trunk/flashchips.h

Modified: trunk/flashchips.c
==============================================================================
--- trunk/flashchips.c  Sun May 24 01:59:23 2015        (r1890)
+++ trunk/flashchips.c  Wed Jun  3 00:32:24 2015        (r1891)
@@ -9903,7 +9903,202 @@
                .voltage        = {2700, 3600}, /* 2.3-3.6V for Pm25LD040 */
        },
 
-{
+       {
+               .vendor         = "PMC",
+               .name           = "Pm25LQ020",
+               .bustype        = BUS_SPI,
+               .manufacture_id = PMC_ID,
+               .model_id       = PMC_PM25LQ020,
+               .total_size     = 256,
+               .page_size      = 256,
+               /* OTP: 256B total; read 0x4B, write 0xB1 */
+               .feature_bits   = FEATURE_WRSR_WREN | FEATURE_OTP,
+               .tested         = TEST_UNTESTED,
+               .probe          = probe_spi_rdid,
+               .probe_timing   = TIMING_ZERO,
+               .block_erasers  =
+               {
+                       {
+                               .eraseblocks = { {4 * 1024, 64} },
+                               .block_erase = spi_block_erase_20,
+                       }, {
+                               .eraseblocks = { {4 * 1024, 64} },
+                               .block_erase = spi_block_erase_d7,
+                       }, {
+                               .eraseblocks = { {64 * 1024, 4} },
+                               .block_erase = spi_block_erase_d8,
+                       }, {
+                               .eraseblocks = { {256 * 1024, 1} },
+                               .block_erase = spi_block_erase_60,
+                       }, {
+                               .eraseblocks = { {256 * 1024, 1} },
+                               .block_erase = spi_block_erase_c7,
+                       }
+               },
+               .printlock      = spi_prettyprint_status_register_bp3_srwd, /* 
bit6 is quad enable */
+               .unlock         = spi_disable_blockprotect_bp3_srwd,
+               .write          = spi_chip_write_256,
+               .read           = spi_chip_read,
+               .voltage        = {2300, 3600},
+       },
+
+       {
+               .vendor         = "PMC",
+               .name           = "Pm25LQ040",
+               .bustype        = BUS_SPI,
+               .manufacture_id = PMC_ID,
+               .model_id       = PMC_PM25LQ040,
+               .total_size     = 512,
+               .page_size      = 256,
+               /* OTP: 256B total; read 0x4B, write 0xB1 */
+               .feature_bits   = FEATURE_WRSR_WREN | FEATURE_OTP,
+               .tested         = TEST_UNTESTED,
+               .probe          = probe_spi_rdid,
+               .probe_timing   = TIMING_ZERO,
+               .block_erasers  =
+               {
+                       {
+                               .eraseblocks = { {4 * 1024, 128} },
+                               .block_erase = spi_block_erase_20,
+                       }, {
+                               .eraseblocks = { {4 * 1024, 128} },
+                               .block_erase = spi_block_erase_d7,
+                       }, {
+                               .eraseblocks = { {64 * 1024, 8} },
+                               .block_erase = spi_block_erase_d8,
+                       }, {
+                               .eraseblocks = { {512 * 1024, 1} },
+                               .block_erase = spi_block_erase_60,
+                       }, {
+                               .eraseblocks = { {512 * 1024, 1} },
+                               .block_erase = spi_block_erase_c7,
+                       }
+               },
+               .printlock      = spi_prettyprint_status_register_bp3_srwd, /* 
bit6 is quad enable */
+               .unlock         = spi_disable_blockprotect_bp3_srwd,
+               .write          = spi_chip_write_256,
+               .read           = spi_chip_read, /* Fast read (0x0B) and multi 
I/O supported */
+               .voltage        = {2300, 3600},
+       },
+
+       {
+               .vendor         = "PMC",
+               .name           = "Pm25LQ080",
+               .bustype        = BUS_SPI,
+               .manufacture_id = PMC_ID,
+               .model_id       = PMC_PM25LQ080,
+               .total_size     = 1024,
+               .page_size      = 256,
+               /* OTP: 64B total; read 0x4B, write 0xB1 */
+               .feature_bits   = FEATURE_WRSR_WREN | FEATURE_OTP,
+               .tested         = TEST_UNTESTED,
+               .probe          = probe_spi_rdid,
+               .probe_timing   = TIMING_ZERO,
+               .block_erasers  =
+               {
+                       {
+                               .eraseblocks = { {4 * 1024, 256} },
+                               .block_erase = spi_block_erase_20,
+                       }, {
+                               .eraseblocks = { {4 * 1024, 256} },
+                               .block_erase = spi_block_erase_d7,
+                       }, {
+                               .eraseblocks = { {64 * 1024, 16} },
+                               .block_erase = spi_block_erase_d8,
+                       }, {
+                               .eraseblocks = { {1024 * 1024, 1} },
+                               .block_erase = spi_block_erase_60,
+                       }, {
+                               .eraseblocks = { {1024 * 1024, 1} },
+                               .block_erase = spi_block_erase_c7,
+                       }
+               },
+               .printlock      = spi_prettyprint_status_register_bp3_srwd, /* 
bit6 is quad enable */
+               .unlock         = spi_disable_blockprotect_bp3_srwd,
+               .write          = spi_chip_write_256,
+               .read           = spi_chip_read, /* Fast read (0x0B) and multi 
I/O supported */
+               .voltage        = {2300, 3600},
+       },
+
+       {
+               .vendor         = "PMC",
+               .name           = "Pm25LQ016",
+               .bustype        = BUS_SPI,
+               .manufacture_id = PMC_ID,
+               .model_id       = PMC_PM25LQ016,
+               .total_size     = 2048,
+               .page_size      = 256,
+               /* OTP: 256B total; read 0x4B, write 0xB1 */
+               .feature_bits   = FEATURE_WRSR_WREN | FEATURE_OTP,
+               .tested         = TEST_UNTESTED,
+               .probe          = probe_spi_rdid,
+               .probe_timing   = TIMING_ZERO,
+               .block_erasers  =
+               {
+                       {
+                               .eraseblocks = { {4 * 1024, 512} },
+                               .block_erase = spi_block_erase_20,
+                       }, {
+                               .eraseblocks = { {4 * 1024, 512} },
+                               .block_erase = spi_block_erase_d7,
+                       }, {
+                               .eraseblocks = { {64 * 1024, 32} },
+                               .block_erase = spi_block_erase_d8,
+                       }, {
+                               .eraseblocks = { {2048 * 1024, 1} },
+                               .block_erase = spi_block_erase_60,
+                       }, {
+                               .eraseblocks = { {2048 * 1024, 1} },
+                               .block_erase = spi_block_erase_c7,
+                       }
+               },
+               .printlock      = spi_prettyprint_status_register_bp3_srwd, /* 
bit6 is quad enable */
+               .unlock         = spi_disable_blockprotect_bp3_srwd,
+               .write          = spi_chip_write_256,
+               .read           = spi_chip_read, /* Fast read (0x0B) and multi 
I/O supported */
+               .voltage        = {2300, 3600},
+       },
+
+       {
+               .vendor         = "PMC",
+               .name           = "Pm25LQ032C",
+               .bustype        = BUS_SPI,
+               .manufacture_id = PMC_ID,
+               .model_id       = PMC_PM25LQ032C,
+               .total_size     = 4096,
+               .page_size      = 256,
+               /* OTP: 64B total; read 0x4B, write 0xB1 */
+               .feature_bits   = FEATURE_WRSR_WREN | FEATURE_OTP,
+               .tested         = TEST_OK_PR,
+               .probe          = probe_spi_rdid,
+               .probe_timing   = TIMING_ZERO,
+               .block_erasers  =
+               {
+                       {
+                               .eraseblocks = { {4 * 1024, 1024} },
+                               .block_erase = spi_block_erase_20,
+                       }, {
+                               .eraseblocks = { {4 * 1024, 1024} },
+                               .block_erase = spi_block_erase_d7,
+                       }, {
+                               .eraseblocks = { {64 * 1024, 64} },
+                               .block_erase = spi_block_erase_d8,
+                       }, {
+                               .eraseblocks = { {4096 * 1024, 1} },
+                               .block_erase = spi_block_erase_60,
+                       }, {
+                               .eraseblocks = { {4096 * 1024, 1} },
+                               .block_erase = spi_block_erase_c7,
+                       }
+               },
+               .printlock      = spi_prettyprint_status_register_bp3_srwd, /* 
bit6 is quad enable */
+               .unlock         = spi_disable_blockprotect_bp3_srwd,
+               .write          = spi_chip_write_256,
+               .read           = spi_chip_read, /* Fast read (0x0B) and multi 
I/O supported */
+               .voltage        = {2700, 3600},
+       },
+
+       {
                .vendor         = "PMC",
                .name           = "Pm25LV512(A)",
                .bustype        = BUS_SPI,

Modified: trunk/flashchips.h
==============================================================================
--- trunk/flashchips.h  Sun May 24 01:59:23 2015        (r1890)
+++ trunk/flashchips.h  Wed Jun  3 00:32:24 2015        (r1891)
@@ -560,6 +560,11 @@
 #define PMC_PM25LD512          0x20    /* Same as Pm25LD512C, but the latter 
has more locking options. */
 #define PMC_PM25LD010          0x21    /* Same as Pm25LD010C, but the latter 
has more locking options. */
 #define PMC_PM25LD020          0x22    /* Same as Pm25LD020C, but the latter 
has more locking options. */
+#define PMC_PM25LQ020          0x42
+#define PMC_PM25LQ040          0x43
+#define PMC_PM25LQ080          0x44
+#define PMC_PM25LQ016          0x45
+#define PMC_PM25LQ032C         0x46
 #define PMC_PM25LV512          0x7B    /* Same as Pm25LV512A */
 #define PMC_PM25LV010          0x7C    /* Same as Pm25LV010A, but the former 
does not support RDID but RES3 only. */
 #define PMC_PM25LV020          0x7D

_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom

Reply via email to