On Sat, 9 Jan 2016 15:07:01 +0000 (UTC) Marin Vlah <[email protected]> wrote:
> Hello everyone, > just wanted to report successful read from 8mbit (1mb) MACRONIX MX > 25L800(5PC-15G) chip and write to 64mbit (8mb) WINBOND 25Q64F(VAIQ) chip. > I've used some old ASUS motherboard dating from May 2009 (could check exact > model if needed) asbase for flashing. Booted it into prepared FreeDOS usb > stick with flashrom, made backup of MACRONIX chip, hot swapped it with > WINBOND chip and flashed it with new image. Everything worked like a charm > and thanks so much to all people which created this great tool! > > Additionaly, if this will be of any help to somebody, new image / WINBOND > chip was for AsRock Extreme 4+ FM2A88M motherboard, downloaded at > http://www.asrock.com/mb/AMD/FM2A88M%20Extreme4+/?cat=Download&os=BIOS.Version > was 2.80 for "Instant Flash" and encapsulation in BIOS image file found > inside ZIP archive (size 8mb+4kb) was trimmed to exactly 8mb using another > great tool: https://github.com/LongSoft/UEFITool. > Greetings,Marin. > Hello Marin, thanks for your report! Both flash chips are already marked as fully tested in the current version of flashrom. However, if the board you have used for flashing is not already found in the wiki at https://www.flashrom.org/Supported_hardware we could add it you supply the exact model. If possible, please always include a (verbose) log with such reports so that we can verify them and also look for oddities that might be interesting for our future work, thanks. You can easily create it by using the -o option of flashrom, e.g.: flashrom -p internal -o logfile.txt -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
