On Fri, 11 Mar 2016 08:25:16 -0800 Eric Donaldson <e...@zadarastorage.com> wrote:
> Sorry about that, thought I had included the command I was running. I was > just running the probe on it to figure out if I was going to be able to > read and write to flash, then it said to run it verbosely and submit it. > `flashrom -p internal:pci=01:00.0` I think you are confusing the internal programmer with nicintel_spi (etc). The internal programmer is actually used to access the flash chip of the mainboard containing the firmware of the board and possibly its on-board peripherals. Thus it *might* contain the PXE firmware as well but there is no easy way to prepare images for that. However, from what you wrote so far I think you want to use nicintel_spi and friends to access the boot flash of dedicated NICs. For them the pci parameter makes way more sense as well :) -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list flashrom@flashrom.org https://www.flashrom.org/mailman/listinfo/flashrom
