On Sat, 12 Mar 2016 17:31:39 +0000 Adrian Graham <wit...@binarydinosaurs.co.uk> wrote:
> On 12/03/2016 16:27, "Stefan Tauner" <stefan.tau...@alumni.tuwien.ac.at> > wrote: > > > On Sat, 12 Mar 2016 16:08:54 +0000 > > Adrian Graham <wit...@binarydinosaurs.co.uk> wrote: > > > >> On 12/03/2016 15:46, "Stefan Tauner" <stefan.tau...@alumni.tuwien.ac.at> > >> wrote: > >> > >> > >> Ah, OK. In that case I don't know why it didn't finish writing then, unless > >> my temporary connections between RasPi and flash moved a little bit or just > >> aren't tight enough for a good signal. Cable length maybe - signal path is > >> RasPi -> 40pin IDE cable -> hookup wires (15cm) soldered to the pads on the > >> chip. Now that I've got more female-female jumper wires I can go direct to > >> the Pi to shorten the distance drastically. > > > > That makes a huge difference for the quality of the signals :) > > Certainly does - it worked this time with a much shorter signal path! Do you > still want a verbose dump of the writing? Yes, please. I'll just want to make sure that we set the status of the chip correctly and you did not miss anything. > Still stumped on the bootloader though, even a generic tg582n won't boot. > Odd. Probably not flashrom's fault... flashrom does not care about the content of the files you feed it. I fear I can't help with the tg582n/bootloader problem itself, sorry. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list flashrom@flashrom.org https://www.flashrom.org/mailman/listinfo/flashrom
