On Sun, 31 Jul 2016 15:34:18 +0530 Pradeep Ch <pradeepsysar...@gmail.com> wrote:
> favorite > <http://stackoverflow.com/questions/38674226/flashrom-tool-command-has-failed-to-write-to-nor-flash-using-arm-usb-ocd-jtag#> > > I am able to detect my flash chip when I use the command: > > ./flashrom -p ft2232_spi:type=arm-usb-ocd -c EN25Q64 > > If use the below command to write binary file to the flash memory using > JTAG - ARM-USB-OCD debugger for my target board RT5350F-OLinuXino-EVB, > > ./flashrom -p ft2232_spi:type=arm-usb-ocd -w > FlashImage_RT5350F_OLinuXino_EVB.bin > > I am getting an error, the error is: > > Found Eon flash chip "EN25Q64" (8192 kB, SPI) on ft2232_spi. > ftdi_write_data: -110, usb bulk write failed > send_buf failed before read: 1 > Reading old flash chip contents... ftdi_read_data: -110, usb bulk read failed > get_buf failed: 1 > FAILED. Do you power the whole setup via the OCD? That might be the culprit. I presume that it can not supply enough current in all operating modes. Apparently it is enough to probe for the chip though... -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list flashrom@flashrom.org https://www.flashrom.org/mailman/listinfo/flashrom
