Today I have tried flashrom on a rather old L372N1 computer (PIV 2,8Ghz,
GC Frontman):
------------------------------------------------------------
flashrom v0.9.7-r1711 on Linux 3.14.50-std460-i586 (i686)
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK.
Active config mode, unknown reg 0x20 ID: ea.
Please send the output of "flashrom -V" to
[email protected] with W836xx: your board name: flashrom -V
as the subject to help us finish support for your Super I/O. Thanks.
Found chipset "SiS 645DX". Enabling flash write... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.
------------------------------------------------------------
The BIOS Chip on the mainboard can be accessed easily; it is placed
inside a special hanger and appears to be replacable. There is a sticker
on the BIOS Chip saying:
686
AMIBIOS
NBEC(c)2000
BA31
8603
installed BIOS: Amibios v1.54, 10/15/2003, Version 1.08G
The current BIOS there has some disadvantages like support with old
style disks up to a maximum of 160GB (manual Cylinder-Head-Sector
configuration); today I have tried it with a 64GB SSD IDE disk and the
BIOS can not boot from it ( CD + floppy boot is o.k.).
How do you believe are the chances to get flashrom running on that
machine or to exchange the BIOS with a newer one?
Elmar
P.S.: I have attached some more information about the system as I was
unsure which one would help you.
# dmidecode 2.12
SMBIOS 2.3 present.
26 structures occupying 1772 bytes.
Table at 0x000F0670.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 07.00T
Release Date: 04/02/01
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 256 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: Gericom
Product Name: L372N1
Version: 1.0
Serial Number: 00000000
UUID: 00010203-0405-0607-0001-020304050607
Wake-up Type: Modem Ring
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: MANUFACTURER
Product Name: L372N1
Version: 1.0
Serial Number: 00000000
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: Uknown Chassis Manufacture
Type: Desktop
Lock: Not Present
Version: Version 1.00
Serial Number: 123456890
Asset Tag: 0123ABC
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 32 bytes
Processor Information
Socket Designation: Slot-1
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 29 0F 00 00 55 00 00 00
Signature: Type 0, Family 15, Model 2, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
DE (Debugging extension)
TSC (Time stamp counter)
PAE (Physical address extension)
Version: Intel(R) Pentium(R) 4 Processor
Voltage: 3.3 V 2.9 V
External Clock: 133 MHz
Max Speed: 300 MHz
Current Speed: 2800 MHz
Status: Populated, Enabled
Upgrade: Slot 1
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 8 kB
Maximum Size: 1024 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Pipeline Burst Synchronous
Speed: 40 ns
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 4-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 kB
Maximum Size: 1024 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: 40 ns
Error Correction Type: Parity
System Type: Unified
Associativity: Other
Handle 0x0007, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: 32-bit ECC
Error Correcting Capabilities:
Single-bit Error Correcting
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 128 MB
Maximum Total Memory Size: 512 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
Standard
FPM
EDO
Parity
ECC
SIMM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 4
0x0008
0x0009
0x000A
0x000B
Enabled Error Correcting Capabilities:
Single-bit Error Correcting
Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: ROW-0
Bank Connections: 6
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: ROW-1
Bank Connections: 6
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: ROW-2
Bank Connections: 0 0
Current Speed: Unknown
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x000B, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: ROW-3
Bank Connections: 0 0
Current Speed: Unknown
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x000C, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000D, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000E, DMI type 9, 13 bytes
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 3
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000F, DMI type 9, 13 bytes
System Slot Information
Designation: PCI4
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 4
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0010, DMI type 9, 13 bytes
System Slot Information
Designation: PCI5
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 5
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0011, DMI type 9, 13 bytes
System Slot Information
Designation: ISA1
Type: 16-bit ISA
Current Usage: Unknown
Length: Long
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0012, DMI type 9, 13 bytes
System Slot Information
Designation: ISA2
Type: 16-bit ISA
Current Usage: Unknown
Length: Long
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0013, DMI type 11, 5 bytes
OEM Strings
String 1: SMBIOS Support from AMI
String 2: Tested by James
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: Mini Centronics
External Reference Designator: Def
External Connector Type: DB-25 male
Port Type: SSA SCSI
Handle 0x0015, DMI type 12, 5 bytes
System Configuration Options
Option 1: System Management BIOS from Atlanta
Option 2: SMBIOS from AMI
Handle 0x0016, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Abbreviated
Installable Languages: 4
English
Traditional Chinese
Simplified Chinese
Japanese
Currently Installed Language: Not Specified
Handle 0x0017, DMI type 15, 27 bytes
System Event Log
Area Length: 4096 bytes
Header Start Offset: 0x0000
Data Start Offset: 0x0000
Access Method: General-purpose non-volatile data functions
Access Address: 0x0001
Status: Valid, Full
Change Token: 0x00000100
Header Format: No Header
Supported Log Type Descriptors: 2
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Log area reset/cleared
Data Format 2: None
Handle 0x0018, DMI type 64, 11 bytes
Unknown Type
Header and Data:
40 0B 18 00 00 A0 CC D9 B3 DA 2D
Handle 0x0019, DMI type 127, 4 bytes
End Of Table
sysresccd
description: Desktop Computer
product: L372N1
vendor: Gericom
version: 1.0
serial: 00000000
width: 32 bits
capabilities: smbios-2.3 dmi-2.3
configuration: chassis=desktop uuid=00010203-0405-0607-0001-020304050607
*-core
description: Motherboard
product: L372N1
vendor: MANUFACTURER
physical id: 0
version: 1.0
serial: 00000000
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 07.00T
date: 04/02/01
size: 64KiB
capacity: 192KiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot
bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720
int13floppy2880 int5printscreen int9keyboard int17printer int10video acpi usb
agp ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: Intel(R) Pentium(R) 4 CPU 2.80GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 15.2.9
slot: Slot-1
size: 2800MHz
width: 32 bits
clock: 133MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 sep
mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
pebs bts cid xtpr
configuration: id=0
*-cache:0
description: L1 cache
physical id: 5
slot: Internal Cache
size: 8KiB
capacity: 1MiB
clock: 25MHz (40.0ns)
capabilities: pipeline-burst synchronous internal write-back data
*-cache:1
description: L2 cache
physical id: 6
slot: Internal Cache
size: 512KiB
capacity: 1MiB
clock: 25MHz (40.0ns)
capabilities: synchronous internal write-back unified
*-memory
description: System memory
physical id: 1
size: 2019MiB
*-pci
description: Host bridge
product: SiS645DX Host & Memory & AGP Controller
vendor: Silicon Integrated Systems [SiS]
physical id: 100
bus info: pci@0000:00:00.0
version: 00
width: 32 bits
clock: 33MHz
configuration: driver=agpgart-sis latency=64
resources: irq:0 memory:dc000000-dfffffff
*-pci:0
description: PCI bridge
product: AGP Port (virtual PCI-to-PCI bridge)
vendor: Silicon Integrated Systems [SiS]
physical id: 1
bus info: pci@0000:00:01.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master
resources: memory:d5d00000-d7dfffff memory:c5900000-d5afffff
*-display
description: VGA compatible controller
product: NV17M [GeForce4 440 Go 64M]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pm agp agp-2.0 vga_controller bus_master cap_list
rom
configuration: driver=nouveau latency=64 maxlatency=1 mingnt=5
resources: irq:11 memory:d6000000-d6ffffff
memory:c8000000-cfffffff memory:d5a80000-d5afffff memory:d7de0000-d7dfffff
*-isa
description: ISA bridge
product: SiS961 [MuTIOL Media IO]
vendor: Silicon Integrated Systems [SiS]
physical id: 2
bus info: pci@0000:00:02.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0
*-serial UNCLAIMED
description: SMBus
product: SiS961/2/3 SMBus controller
vendor: Silicon Integrated Systems [SiS]
physical id: 2.1
bus info: pci@0000:00:02.1
version: 00
width: 32 bits
clock: 33MHz
configuration: latency=0
resources: ioport:c00(size=32)
*-usb:0
description: USB controller
product: USB 1.1 Controller
vendor: Silicon Integrated Systems [SiS]
physical id: 2.2
bus info: pci@0000:00:02.2
version: 07
width: 32 bits
clock: 33MHz
capabilities: ohci bus_master
configuration: driver=ohci-pci latency=64 maxlatency=80
resources: irq:10 memory:dbffe000-dbffefff
*-usb:1
description: USB controller
product: USB 1.1 Controller
vendor: Silicon Integrated Systems [SiS]
physical id: 2.3
bus info: pci@0000:00:02.3
version: 07
width: 32 bits
clock: 33MHz
capabilities: ohci bus_master
configuration: driver=ohci-pci latency=64 maxlatency=80
resources: irq:10 memory:dbfff000-dbffffff
*-ide
description: IDE interface
product: 5513 IDE Controller
vendor: Silicon Integrated Systems [SiS]
physical id: 2.5
bus info: pci@0000:00:02.5
version: d0
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=pata_sis latency=128
resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8)
ioport:376 ioport:ff00(size=16)
*-communication UNCLAIMED
description: Modem
product: AC'97 Modem Controller
vendor: Silicon Integrated Systems [SiS]
physical id: 2.6
bus info: pci@0000:00:02.6
version: a0
width: 32 bits
clock: 33MHz
capabilities: pm generic cap_list
configuration: latency=64 maxlatency=11 mingnt=52
resources: ioport:d400(size=256) ioport:d000(size=128)
*-multimedia UNCLAIMED
description: Multimedia audio controller
product: SiS7012 AC'97 Sound Controller
vendor: Silicon Integrated Systems [SiS]
physical id: 2.7
bus info: pci@0000:00:02.7
version: a0
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: latency=64 maxlatency=11 mingnt=52
resources: ioport:dc00(size=256) ioport:d800(size=128)
*-network
description: Ethernet interface
product: SiS900 PCI Fast Ethernet
vendor: Silicon Integrated Systems [SiS]
physical id: 3
bus info: pci@0000:00:03.0
logical name: enp0s3
version: 90
serial: 00:a0:cc:d9:b3:da
size: 10Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list rom ethernet physical tp mii
10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sis900
driverversion=v1.08.10 Apr. 2 2006 duplex=half latency=64 link=no maxlatency=11
mingnt=52 multicast=yes port=MII speed=10Mbit/s
resources: irq:10 ioport:cc00(size=256) memory:dbffd000-dbffdfff
memory:dbfc0000-dbfdffff
*-pcmcia
description: CardBus bridge
product: OZ601/6912/711E0 CardBus/SmartCardBus Controller
vendor: O2 Micro, Inc.
physical id: 8
bus info: pci@0000:00:08.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus latency=176 maxlatency=5
mingnt=128
resources: irq:5 memory:80000000-80000fff ioport:1000(size=256)
ioport:1400(size=256) memory:84000000-87ffffff memory:88000000-8bffffff
*-firewire
description: FireWire (IEEE 1394)
product: VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
vendor: VIA Technologies, Inc.
physical id: 9
bus info: pci@0000:00:09.0
version: 46
width: 32 bits
clock: 33MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=firewire_ohci latency=64 maxlatency=32
resources: irq:5 memory:dbffc800-dbffcfff ioport:c800(size=128)
*-pci:1
description: PCI bridge
product: PEX8112 x1 Lane PCI Express-to-PCI Bridge
vendor: PLX Technology, Inc.
physical id: b
bus info: pci@0000:00:0b.0
version: aa
width: 32 bits
clock: 66MHz
capabilities: pci pm msi pciexpress normal_decode bus_master
cap_list
resources: memory:d7e00000-d7efffff memory:d5b00000-d5bfffff
*-usb
description: USB controller
product: uPD720201 USB 3.0 Host Controller
vendor: Renesas Technology Corp.
physical id: 0
bus info: pci@0000:02:00.0
version: 03
width: 64 bits
clock: 33MHz
capabilities: pm msi msix pciexpress xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:11 memory:d7efe000-d7efffff
*-scsi:0
physical id: 2
logical name: scsi0
capabilities: emulated
*-disk
description: ATA Disk
product: TS64GPSD330
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 2014
serial: B79624A1309428000020
size: 59GiB (64GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 sectorsize=512 signature=10e764c7
*-volume:0
description: Linux filesystem partition
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
capacity: 37GiB
capabilities: primary bootable
*-volume:1
description: Linux swap volume
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
version: 1
serial: f646a13a-f22a-42d7-937a-fb0864624181
size: 3815MiB
capacity: 3815MiB
capabilities: primary nofs swap initialized
configuration: filesystem=swap label=fm-swap pagesize=4096
*-volume:2
description: EXT3 volume
vendor: Linux
physical id: 3
bus info: scsi@0:0.0.0,3
logical name: /dev/sda3
version: 1.0
serial: 26b4067a-e10a-4bc3-9a8b-a505c9359cbe
size: 18GiB
capacity: 18GiB
capabilities: primary journaled extended_attributes large_files
ext3 ext2 initialized
configuration: created=2016-09-02 17:18:41 filesystem=ext3
label=fm-home lastmountpoint=/home modified=2016-09-02 19:05:51
mounted=2016-09-02 17:19:01 state=clean
*-scsi:1
physical id: 3
logical name: scsi1
capabilities: emulated
*-cdrom
description: DVD-RAM writer
product: BD-RE UJ-225S
vendor: MATSHITA
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/cdrom
logical name: /dev/scd0
logical name: /dev/sr0
logical name: /livemnt/boot
version: Q310
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 mount.fstype=iso9660
mount.options=ro,relatime,mode=0644 state=mounted status=ready
*-medium
physical id: 0
logical name: /dev/cdrom
logical name: /livemnt/boot
configuration: mount.fstype=iso9660
mount.options=ro,relatime,mode=0644 state=mounted
*-scsi:2
physical id: 5
bus info: usb@1:1
logical name: scsi2
capabilities: emulated scsi-host
configuration: driver=usb-storage
*-disk
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/sdb
size: 7532MiB (7897MB)
capabilities: partitioned partitioned:dos
configuration: sectorsize=512 signature=c3072e18
*-volume
description: Windows FAT volume
vendor: MSDOS5.0
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sdb1
logical name: /media
version: FAT32
serial: b0d9-767e
size: 7530MiB
capacity: 7531MiB
capabilities: primary fat initialized
configuration: FATs=2 filesystem=fat mount.fstype=vfat
mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro
state=mounted
00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host & Memory &
AGP Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
Kernel driver in use: agpgart-sis
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual
PCI-to-PCI bridge) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d5d00000-d7dfffff
Prefetchable memory behind bridge: c5900000-d5afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS961 [MuTIOL Media IO]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2/3 SMBus controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 0c00 [size=32]
Kernel modules: i2c_sis96x
00:02.2 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller
(rev 07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 0: Memory at dbffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:02.3 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller
(rev 07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at dbfff000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller
(rev d0) (prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller
(A,B step)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 128
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: pata_sis
Kernel modules: pata_sis, pata_acpi, ata_generic
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
(prog-if 00 [Generic])
Subsystem: Uniwill Computer Corp AC'97 Modem Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at d400 [size=256]
Region 1: I/O ports at d000 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012
AC'97 Sound Controller (rev a0)
Subsystem: Uniwill Computer Corp SiS7012 AC'97 Sound Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at d800 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast
Ethernet (rev 90)
Subsystem: Uniwill Computer Corp SiS900 PCI Fast Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at cc00 [size=256]
Region 1: Memory at dbffd000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at dbfc0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sis900
Kernel modules: sis900
00:08.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus
Controller
Subsystem: Uniwill Computer Corp OZ601/6912/711E0 CardBus/SmartCardBus
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 84000000-87ffffff (prefetchable)
Memory window 1: 88000000-8bffffff
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Bridge: PM- B3+
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)]
IEEE 1394 OHCI Controller (rev 46) (prog-if 10 [OHCI])
Subsystem: Uniwill Computer Corp VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dbffc800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at c800 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
00:0b.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI
Bridge (rev aa) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d7e00000-d7efffff
Prefetchable memory behind bridge: d5b00000-d5bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express (v1) PCI/PCI-X to PCI-Express Bridge, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <1us, L1 <16us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
01:00.0 VGA compatible controller: NVIDIA Corporation NV17M [GeForce4 440 Go
64M] (rev a3) (prog-if 00 [VGA controller])
Subsystem: Uniwill Computer Corp NV17M [GeForce4 440 Go 64M]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at d5a80000 (32-bit, prefetchable) [size=512K]
Expansion ROM at d7de0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
Rate=x4
Kernel driver in use: nouveau
Kernel modules: nouveau
02:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host
Controller (rev 03) (prog-if 30 [XHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d7efe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
Vector table: BAR=0 offset=00001000
PBA: BAR=0 offset=00001080
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <4us, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+,
OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
OBFF Disabled
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Kernel driver in use: xhci_hcd
_______________________________________________
flashrom mailing list
[email protected]
https://www.flashrom.org/mailman/listinfo/flashrom
