Hello Florian, thanks for your patch, I've commented on it inline.
On 10.12.18 11:05, Florian Kaiser wrote: > I am using this patch for a while now and I did not encounter any problems. I > am not sure if this was/is not supported. Is there any reason why this is not > supported? No reason beside that nobody cared about it yet, I guess. Nico > From 5df0b1ff7bb95f4384c98727a56a03660dde6aaa Mon Sep 17 00:00:00 2001 > From: Florian Kaiser <fkai...@genua.de> > Date: Tue, 31 Jul 2018 13:42:22 +0200 > Subject: [PATCH] dediprog: allow the use of the programming target "socket". > > Change-Id: I8c5120ce2151138093be0f27951916ec7f725574 > Signed-off-by: Florian Kaiser <fkai...@genua.de> > --- > dediprog.c | 6 +++++- > flashrom.8.tmpl | 5 +++-- > 2 files changed, 8 insertions(+), 3 deletions(-) > > diff --git a/dediprog.c b/dediprog.c > index 72818ea..0eb84ec 100644 > --- a/dediprog.c > +++ b/dediprog.c > @@ -1028,7 +1028,7 @@ int dediprog_init(void) > free(target_str); > return 1; > } > - if (target < 1 || target > 2) { > + if (target < 1 || target > 3) { > msg_perr("Error: Value for 'target' is out of > range.\n"); > free(target_str); > return 1; > @@ -1047,6 +1047,10 @@ int dediprog_init(void) > msg_pinfo("Using target %s.\n", > "FLASH_TYPE_APPLICATION_FLASH_2"); > target = FLASH_TYPE_APPLICATION_FLASH_2; > break; > + case 3: > + msg_pinfo("Using target %s.\n", "FLASH_TYPE_SOCKET"); > + target = FLASH_TYPE_SOCKET; > + break; This makes a flaw in set_target_flash() obvious now. Not all programmers have a socket. I just checked set_target_flash() silently fails with an SF 100. So we should check for compatibility there or at the calling site. > default: > break; > } > diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl > index c557af7..04fd1c8 100644 > --- a/flashrom.8.tmpl > +++ b/flashrom.8.tmpl > @@ -946,8 +946,9 @@ parameter specifies which target chip should be used. > Syntax is > where > .B value > can be > -.BR 1 " or " 2 > -to select target chip 1 or 2 respectively. The default is target chip 1. > +.BR 1 ", " 2 " or " 3 > +to select target chip 1 or 2 respectively. The default is target chip 1. To > use the programming socket This reads confusing now (set 1, 2 or 3 to choose between 1 and 2?). > +of the SF600 you need to select target 3. > .SS _______________________________________________ flashrom mailing list flashrom@flashrom.org https://mail.coreboot.org/mailman/listinfo/flashrom