I was unable to flash my chipset, so I am including the verbose log as an
attachment as your message requested.
Joe Bill Schirtzinger
Beit Eshel President
http://www.beitesheldonate.org | (270) 681-5728
http://www.theroyalrainbow.com
Sent with [ProtonMail](https://protonmail.com) Secure Email.
flashrom v1.1-rc1-115-g61e16e5 on Linux 5.3.7-arch1-1-ARCH (x86_64)
flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.6.2, GCC 9.2.0, little endian
Command line (3 args): flashrom --programmer internal -V
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Initializing internal programmer
/sys/class/mtd/mtd0 does not exist
No coreboot table found.
Using Internal DMI decoder.
DMI string chassis-type: "Portable"
Laptop detected via DMI.
DMI string system-manufacturer: "Dell Inc."
DMI string system-product-name: "Inspiron N4010"
DMI string system-version: "A13 "
DMI string baseboard-manufacturer: "Dell Inc."
DMI string baseboard-product-name: "021CN3"
DMI string baseboard-version: "A13"
W836xx enter config mode worked or we were already in config mode. W836xx leave
config mode had no effect.
Active config mode, unknown reg 0x20 ID: 85.
Found ITE EC, ID 0x8502, Rev 0x61 on port 0x4e.
Found chipset "Intel HM57" with PCI ID 8086:3b0b.
This chipset is marked as untested. If you are using an up-to-date version
of flashrom *and* were (not) able to successfully update your firmware with it,
then please email a report to flashrom@flashrom.org including a verbose (-V)
log.
Thank you!
Enabling flash write... Root Complex Register Block address = 0xfed1c000
FAILED!
_______________________________________________
flashrom mailing list -- flashrom@flashrom.org
To unsubscribe send an email to flashrom-le...@flashrom.org
