Hi Nicklas, well, at least you don´t have a good (enough) connection to the chip.
Check your log file: "probe_spi_rdid_generic:" should give you the same ID as given in the datasheet of your chip. Further it should give you always the same value. As the value changes a lot, it seems that you have bad cable connections or an signal integrity problem. Check the cables/cable connections and try with a lower frequency if the programmer supports this. Try with cables as short as possible as well. Regards, Simon -----Ursprüngliche Nachricht----- Von: Nicklas Lennert <lennert1...@gmail.com> Gesendet: Dienstag, 21. April 2020 15:49 An: flashrom@flashrom.org Betreff: [flashrom] W25Q256JWEQ 1.8V Hi. I'm trying to flash bios to a motherboard MSI B450M-A PRO MAX. I have connected to the "new type" JSPI1 connectors. Think i have a connection to the chip, but its not listed on your chip list. Gets a response only once every time i power up the chip. I use a CH341A PRO programmer with a 1.8V converter. Then connected wires directly to the motherboard. No unsoldering. Ubuntu 18.04.4 LTS https://www.winbond.com/resource-files/w25q256jw%20spi%20revb%2012082017.pdf https://forum-en.msi.com/index.php?topic=322528.0 - Connected by this diagram Can you help me? Best regards Nicklas Lennert Denmark _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
