Not at all! The need for 3.3v ---> 1.8v adapter - depends not on "Intel vs AMD", but on the model of that SPI flash chip. You see the markings on the back of such a chip, google them, find a correct datasheet, open it and read what's the working voltage for this chip - 3.3v or 1.8v.
On Wed, Oct 7, 2020 at 9:43 AM Clay Daniels <clay.daniels...@gmail.com> wrote: > > https://www.win-raid.com/t4287f16-GUIDE-The-Beginners-Guide-to-Using-a-CH-A-SPI-Programmer-Flasher-With-Pictures.html > > Nice article in general, but it also says: > "Note: If you are flashing an AMD motherboard, you need to put the 1.8V > adapter into the SPI, and then put the clip assembly onto that." > > So is this right? 3.3v for Intel, 1.8v for AMD? > _______________________________________________ > flashrom mailing list -- flashrom@flashrom.org > To unsubscribe send an email to flashrom-le...@flashrom.org _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
