Buhrow, Simon writes: > Hi Berké, > > your "problem" is that you get a GigDevice and not the expected > Winbond detection, right? > > The ID found is: id1 0xc8, id2 0x4015 The windbond should have (as > mentioned in the datasheet): id1 0x14, id2 0x4015 So they differ in > the id1 value. > > As 0xc8 and 0x14 differ in many bits I assume that everything is fine > and the correct ID is 0xc8. > > That´s why I´d like to ask: Where did you get the information that > make you expect a Winbond chip from? Did you get it from a > Olimex-Datasheet or did you read the chip name from the chip case > itself? > > Btw: There is a newer version of flashrom. It´s never a bad idea to > use the new one to reduce problems. ( > https://www.flashrom.org/Flashrom/1.2 ) > > Regards, > > Simon
Hi Simon, Yes, I got the chip ID from the Olimex schematic, but you're right the actual chip on the board is a Gigadevice, the marking is 25Q16CSIG. I'll compile and give the new flashrom a try when I get back to it and let you know. Regards PS. Thanks for flashrom, and sorry for the late reply. -- Berké Durak, Ph.D ExH R&D _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
