Edward, thanks a lot! I did a "git clone https://github.com/flashrom/flashrom Then navigated to flashrom, did a make, make install, (skipped make clean for now) Then: root@clay-MS-7C37:~/flashrom# flashrom -p internal flashrom v1.2-163-g855d6b6 on Linux 5.8.0-25-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found chipset "AMD FP4". Enabling flash write... Warning: spireadmode not set, leaving spireadmode unchanged.Warning: spispeed not set, leaving spispeed unchanged.OK. Found Winbond flash chip "W25Q256.W" (32768 kB, SPI) mapped at physical address 0x00000000fe000000. No operations were specified. root@clay-MS-7C37:~/flashrom# It worked great! I have been looking for this and following it on Gerrit. I see the merge is fresh, 10 hours old. I have a list of at least seven other folks who have 0x59 & 0x61 boards and will notify them too. I do have one who has an 0x51 board with a 0x51 board which is the other email from/to Jean-Paul Crespy. The 0x51 was also listed in Rene Rebe's patch from the flashrom list of Oct 12. Anyway, thanks for all your work. I did notice you did more than just add 0x59 & 0x61, you made deeper changes that Rene did not think about, and all for the better I must say. Clay On Wed, Dec 16, 2020 at 4:32 AM Edward O'Callaghan <quasi...@google.com> wrote: > I just noticed this email while searching for 0x61 and thought I would > mention that the support for Ryzen style FCH's is actually done and has > merged. Feel free to give the tip of the tree a go for your board and let > me know if you have any issues with it! > > Kind regards, > Edward. > > On Wed, 16 Dec 2020 at 17:20, Clay Daniels <clay.daniels...@gmail.com> > wrote: > >> On Tue, Dec 15, 2020 at 4:27 PM Jean-Paul Crespy via flashrom < >> flashrom@flashrom.org> wrote: >> >>> Hello, >>> >>> As indicated in error message (attached file "flashrom.log"), I transmit >>> you the requested information. >>> >>> Best regards >>> >>> Jean-Paul Crespy >>> >> >> I have a similar AMD motherboard as you, and when I first tried playing >> with flashrom at the end of August I installed flashrom on FreeBSD. I got >> the same message as you: >> "FCH device found but SMBus revision 0x61 does not match known values." >> >> Well, I am retired and messing with computers is my hobby, so I thought >> maybe trying a Linux would work better with flashrom, and installed Ubuntu. >> I still got the same message, and no real answer until Rene' Rebe posted >> this email on Oct 12: >> >> >> https://mail.google.com/mail/u/0/?tab=wm&ogbl#label/coreboot%2Fflashrom/WhctKJWHzSmQKFLjFkZrdWlXtzblWZTQhgLHvjxvmljHgPQLwpSfpwJdZrBqSvCfxLDJskv >> >> What I realized was that I needed to download the source, modify a line >> to include my particular spi chip, compile and install flashrom myself. I >> looked at the documentation, asked questions, and IT WORKED. >> And, besides being able to read my flash chip with flashrom, I have been >> able to use it to write a stock bios update from MSI on my x570 >> motherboard, and IT WORKED. The first place to look is here: >> >> https://www.flashrom.org/Downloads >> >> So look at Rene's email & the flashrom download & install info, and ask >> more questions. Most everyone here is very willing to help. >> >> And, there is a fix in the works on Gerrit by the flashrom developers, >> but it's not yet released. >> >> You might enjoy the #flashrom & #coreboot channels on Freenode IRC. >> Best of luck, >> Clay >> >> _______________________________________________ >> flashrom mailing list -- flashrom@flashrom.org >> To unsubscribe send an email to flashrom-le...@flashrom.org >> >
_______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
