Are you doing the ISP (In-System Programming) ? Maybe there are problems with the reliability of your flashing setup (i.e. too long wires between a programmer and test clip)
On Thu, May 13, 2021 at 2:39 AM Tim Tech <agitim...@gmail.com> wrote: > > Are you able to help with the following issue? Thank you > > Calibrating delay loop... OK. > Found Winbond flash chip "unknown Winbond (ex Nexcom) SPI chip" (0 kB, SPI) > on ch341a_spi. > > This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE > The test status of this chip may have been updated in the latest development > version of flashrom. If you are running the latest development version, > please email a report to flashrom@flashrom.org if any of the above operations > work correctly for you with this flash chip. Please include the flashrom log > file for all operations you tested (see the man page for details), and mention > which mainboard or programmer you tested in the subject line. > Thanks for your help! > Read is not working on this chip. Aborting. > _______________________________________________ > flashrom mailing list -- flashrom@flashrom.org > To unsubscribe send an email to flashrom-le...@flashrom.org -- Best regards, Mike Banon Open Source Community Manager of 3mdeb - https://3mdeb.com/ _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
