Hi Please take a look at the error log.
PC is running HP BIOS J01_0233.bin, ME cleaned, HAP bit Set (me_cleaner.py). Chipset: Intel Q67. BIOS Chip is Macronix MX25L6406E. BB and FDO Jumpers are both set on the Mainboard. Can you help me, please? Thank you very much... A. P.
fw-updates@fwupdate:~/Downloads/coreboot/coreboot/build$ sudo flashrom -p internal -w coreboot.rom -c "MX25L6406E/MX25L6408E" -f [sudo] Passwort für fw-updates: flashrom v1.2 on Linux 5.4.0-29-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found chipset "Intel Q67". This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom@flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0x22 to 0x01 failed. New value is 0x22. SPI Configuration is locked down. The Flash Descriptor Override Strap-Pin is set. Restrictions implied by the Master Section of the flash descriptor are NOT in effect. Please note that Protected Range (PR) restrictions still apply. OK. Found Macronix flash chip "MX25L6406E/MX25L6408E" (8192 kB, SPI) mapped at physical address 0x00000000ff800000. Reading old flash chip contents... done. Erasing and writing flash chip... Transaction error! spi_write_cmd failed during command execution at address 0x510000 Reading current flash chip contents... done. Looking for another erase function. spi_write_cmd failed during command execution at address 0x510000 Reading current flash chip contents... done. Looking for another erase function. spi_write_cmd failed during command execution at address 0x510000 Reading current flash chip contents... done. Looking for another erase function. spi_simple_write_cmd failed during command execution Reading current flash chip contents... done. Looking for another erase function. spi_simple_write_cmd failed during command execution Reading current flash chip contents... done. Looking for another erase function. Looking for another erase function. Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Apparently at least some data has changed. Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org with the subject "FAILED: <your board name>"! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! fw-updates@fwupdate:~/Downloads/coreboot/coreboot/build$ sudo flashrom -p internal -w coreboot.rom -c "MX25L6406E/MX25L6408E" -f flashrom v1.2 on Linux 5.4.0-29-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found chipset "Intel Q67". This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom@flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0x22 to 0x01 failed. New value is 0x22. SPI Configuration is locked down. The Flash Descriptor Override Strap-Pin is set. Restrictions implied by the Master Section of the flash descriptor are NOT in effect. Please note that Protected Range (PR) restrictions still apply. OK. Found Macronix flash chip "MX25L6406E/MX25L6408E" (8192 kB, SPI) mapped at physical address 0x00000000ff800000. Reading old flash chip contents... done. Erasing and writing flash chip... Transaction error! spi_write_cmd failed during command execution at address 0x510000 Reading current flash chip contents... done. Looking for another erase function. spi_write_cmd failed during command execution at address 0x510000 Reading current flash chip contents... done. Looking for another erase function. spi_write_cmd failed during command execution at address 0x510000 Reading current flash chip contents... done. Looking for another erase function. spi_simple_write_cmd failed during command execution Reading current flash chip contents... done. Looking for another erase function. spi_simple_write_cmd failed during command execution Reading current flash chip contents... done. Looking for another erase function. Looking for another erase function. Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks! ------------------------------------------------------------------------------- fw-updates@fwupdate:~/Downloads/coreboot/coreboot/build$ sudo flashrom -p internal -w coreboot.rom -c "MX25L6406E/MX25L6408E" -f
_______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
