Hi Flashrom Team,

The DID 0x4019 which is for WINBOND_NEX_W25Q256_V 0x4019 /* W25Q256FV or
W25Q256JV_Q (QE=1) */
supports W25R256JVEIQ flashpart

I think the issue is with table *chipset_enables *defined inside ->
flashrom-master\flashrom-master\Chipset_enable.c
is not matching Elkhart Lake PCH ID which is causing

WARNING: No chipset found. Flash detection will most likely fail



Best Regards

Rao

<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.
www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

On Tue, Nov 23, 2021 at 11:38 AM Rao G <grao....@gmail.com> wrote:

> Hi Flashrom team,
>
> Am trying to flash on W25R256JVEIQ NOR flash
>
> sudo flashrom -p internal -w coreboot_ehl_2609.bin
>
> flash device is not found, hope it means W25R256JVEIQ NOR flash device is
> not supported by flashrom 1.2?
>
> sudo flashrom -p internal -w coreboot_ehl_2609.bin
> flashrom v1.2 on Linux 5.13.0-21-generic (x86_64)
> flashrom is free software, get the source code at https://flashrom.org
>
> Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
> WARNING: No chipset found. Flash detection will most likely fail.
> No EEPROM/flash device found.
> Note: flashrom can never write if the flash chip isn't found automatically
>
> Thanks for your time!
>
> Best Regards
> Rao
>
_______________________________________________
flashrom mailing list -- flashrom@flashrom.org
To unsubscribe send an email to flashrom-le...@flashrom.org

Reply via email to