Hi there Alexey, Looks like you have a problem with your libusb library. Please reinstall the libusb library (you may have to build it from source, if your distro's libusb is broken at the moment - if that's so, make sure to --enable-shared).
Best regards, Ivan Ivanov пн, 16 янв. 2023 г. в 23:54, * via flashrom <flashrom@flashrom.org>: > > Good day, > > Few days ago i've bought new Winbond W25Q64BVDAIG flash, getting errors > during erasing or writing. Read is good. W25Q64FV... is errased and flashed > well. W25Q64BVDAIG flashing works fine in WindowsXP by CH341A - USB > Programmer 1.30. In Willem LPT Programmer set to 3.3V works fine too. CH341A > - black. > > W25Q64BV... during error device stops respond with "run" led on, needs > reinsert to USB to get it again. > ~$ sudo flashrom --programmer ch341a_spi -r Z77EXT62.90A.bin > [sudo] пароль для xxxxxx: > flashrom v1.2 on Linux 5.10.0-17.1-liquorix-amd64 (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). > Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ch341a_spi. > Reading flash... done. > ~$ sudo flashrom --programmer ch341a_spi -r Z77EXT62.90A.rom > flashrom v1.2 on Linux 5.10.0-17.1-liquorix-amd64 (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). > Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ch341a_spi. > Reading flash... done. > ~$ sudo flashrom --programmer ch341a_spi -E > [sudo] пароль для xxxxxx: > flashrom v1.2 on Linux 5.10.0-17.1-liquorix-amd64 (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). > Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ch341a_spi. > Erasing and writing flash chip... > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > ch341a_spi_spi_send_command: Failed to write 36 bytes > RDSR failed! > > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > ch341a_spi_spi_send_command: Failed to write 4265 bytes > Verification impossible because read failed at 0x17000 (len 0x1000) > ERASE FAILED! > Looking for another erase function. > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > ch341a_spi_spi_send_command: Failed to write 34 bytes > spi_write_cmd failed during command execution at address 0x0 > > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > ch341a_spi_spi_send_command: Failed to write 36 bytes > RDSR failed! > Looking for another erase function. > > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > ch341a_spi_spi_send_command: Failed to write 34 bytes > spi_write_cmd failed during command execution at address 0x0 > > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > ch341a_spi_spi_send_command: Failed to write 36 bytes > RDSR failed! > Looking for another erase function. > > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > ch341a_spi_spi_send_command: Failed to write 34 bytes > spi_simple_write_cmd failed during command execution > > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > ch341a_spi_spi_send_command: Failed to write 36 bytes > RDSR failed! > Looking for another erase function. > > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > ch341a_spi_spi_send_command: Failed to write 34 bytes > spi_simple_write_cmd failed during command execution > > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > ch341a_spi_spi_send_command: Failed to write 36 bytes > RDSR failed! > Looking for another erase function. > Looking for another erase function. > Looking for another erase function. > No usable erase functions left. > FAILED! > Your flash chip is in an unknown state. > Please report this on IRC at chat.freenode.net (channel #flashrom) or > mail flashrom@flashrom.org, thanks! > > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > enable_pins: Failed to write 4 bytes > Could not disable output pins. > ~$ sudo flashrom --programmer ch341a_spi -w Z77EXT62.90A.bin -c "W25Q64.V" > flashrom v1.2 on Linux 5.10.0-17.1-liquorix-amd64 (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). > Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ch341a_spi. > Reading old flash chip contents... done. > Erasing and writing flash chip... > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > ch341a_spi_spi_send_command: Failed to write 36 bytes > RDSR failed! > > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > ch341a_spi_spi_send_command: Failed to write 34 bytes > spi_write_cmd failed during command execution at address 0x1500 > > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > ch341a_spi_spi_send_command: Failed to write 36 bytes > RDSR failed! > Reading current flash chip contents... > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > ch341a_spi_spi_send_command: Failed to write 4265 bytes > Can't read anymore! Aborting. > FAILED! > Uh oh. Erase/write failed. Checking if anything has changed. > Reading current flash chip contents... ch341a_spi_spi_send_command: failed to > submit IN transfer: LIBUSB_ERROR_BUSY > ch341a_spi_spi_send_command: Failed to read 4100 bytes > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > > cb_in: error: LIBUSB_TRANSFER_TIMED_OUT > Can't even read anymore! > Your flash chip is in an unknown state. > Please report this on IRC at chat.freenode.net (channel #flashrom) or > mail flashrom@flashrom.org, thanks! > > cb_out: error: LIBUSB_TRANSFER_TIMED_OUT > enable_pins: Failed to write 4 bytes > Could not disable output pins. > > W25Q64FV... works just fine. > ~$ sudo flashrom --programmer ch341a_spi -E > [sudo] пароль для xxxxxx: > flashrom v1.2 on Linux 5.10.0-17.1-liquorix-amd64 (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). > Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ch341a_spi. > Erasing and writing flash chip... Erase/write done. > > ~$ sudo flashrom --programmer ch341a_spi -w Z97EX62_80.bin -c "W25Q64.V" > flashrom v1.2 on Linux 5.10.0-17.1-liquorix-amd64 (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). > Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ch341a_spi. > Reading old flash chip contents... done. > Erasing and writing flash chip... Erase/write done. > Verifying flash... VERIFIED.` > Both chips are found as a "W25Q64.V". > > Best regards, > Alexey > > _______________________________________________ > flashrom mailing list -- flashrom@flashrom.org > To unsubscribe send an email to flashrom-le...@flashrom.org _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org